Best Seam Roller Presser Foot (2026)
5 seam roller presser feet compared: rolled hem feet and a roller foot for leather, by sizes, material and machine fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUYUN WELL Hem Set9.5/10View on Amazon - 2
Best Roller FootHONEYSEW Roller Foot9.5/10View on Amazon - 3
Best Size RangeKraftex 6-Size Set9.5/10View on Amazon - 4
Best Narrow HemStormshopping Hem Set9.4/10View on Amazon - 5
Best Large HemTIGARI Hem Foot Set9.4/10View on Amazon
A narrow hem that curls clean or a leather seam that feeds without dragging starts with the right foot, and the best seam roller presser foot keeps fabric moving under the needle. Rolled hem feet turn the edge as you sew, while a roller foot feeds leather and vinyl. This guide compares the feet on sizes, material and machine fit, so you can match a foot to the fabric in your sewing room.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUYUN WELL Hem Set: 6-piece set with 3 hem feet, a 1/4 in quilting foot and 2 clips. Check price on Amazon
- Best Roller Foot HONEYSEW Roller Foot: Textured metal rollers for leather, vinyl, denim and fur. Check price on Amazon
- Best Size Range Kraftex 6-Size Set: 6 sizes from 3 mm to 1 in for wide and narrow hems. Check price on Amazon
- Best Narrow Hem Stormshopping Hem Set: 3 narrow feet in 3, 4 and 6 mm for thin to medium fabrics. Check price on Amazon
- Best Large Hem TIGARI Hem Foot Set: 4 feet in 7, 8, 9 and 10 mm for wider hems. Check price on Amazon
Machines on the list

SUYUN WELL Narrow Rolled Hem Presser Foot 1/4"
A 6-piece set with 3 rolled hem feet in 3, 4 and 6 mm, a 1/4 in quilting foot with an edge guide and 2 sewing clips, in stainless steel.
Pros
- 3 hem feet plus a 1/4 in quilting foot and 2 clips
- Stainless steel, rust-resistant and bright-finished
- Snap-on, tool-free setup on low shank machines
- 1/4 in foot has reference markings on 3 sides
Cons
- No warranty term stated
- No safety listing stated
- No wide hem sizes included
- No weight or dimensions stated

HONEYSEW Roller Presser Foot for Leather
A roller presser foot with textured metal rollers for leather, vinyl, denim and fur, for low shank snap-on machines.
Pros
- Textured rollers give more control and less friction
- Feeds leather, vinyl, denim, fur and suede
- Metal rollers help prevent needle breaking
- Fits all low shank snap-on machines
Cons
- No warranty term stated
- No sizes stated
- Clear plastic body, not all metal
- For leather and vinyl, not for hems
![Rolled Hem Presser Foot [6 Sizes]](https://m.media-amazon.com/images/I/51PrLovwq0L._SL500_.jpg)
Rolled Hem Presser Foot [6 Sizes]
A 6-size rolled hem foot set with 3 wide feet and 3 narrow feet, for low shank sewing machines.
Pros
- 6 sizes: wide 1/2, 3/4, 1 in and narrow 3, 4, 6 mm
- Snap-on install, easy to use with practice
- Keeps the hem in place without realigning
- Works for most low shank machines
Cons
- No warranty term with a concrete length stated
- No safety listing stated
- No material stated
- No weight or dimensions stated

3Pcs Narrow Rolled Hem Presser Foot Set
A 3-piece narrow rolled hem foot set in 3, 4 and 6 mm, in stainless steel, for low shank snap-on machines.
Pros
- 3 narrow sizes for thin to medium fabrics
- Stainless steel, long-lasting and sturdy
- Guides fabric evenly to reduce slipping and puckering
- Fits many low shank snap-on machines
Cons
- No warranty term stated
- No safety listing stated
- No wide hem sizes included
- May need a bit of practice

TIGARI Rolled Hem Presser Foot
A 4-piece rolled hem foot set in 7, 8, 9 and 10 mm, in stainless steel, for machines with a side-mounting screw.
Pros
- 4 sizes from 7 to 10 mm for wider hems
- Stainless steel, durable and not easy to break
- No pre-folding or ironing required
- Metal curl turns the raw edge under as you sew
Cons
- Needs a side-mounting screw on the machine
- Mounting screw is not included
- Fits industrial and vintage machines only
- No warranty term stated
Other machines to compare
Windman 3 Sizes Wide Rolled Hem Pressure Foot Sewing MachineCheck price on Amazon
5-PCS Rolled Hem Presser Foot SetCheck price on Amazon
CESUSME 2 Pcs Roller Sewing Machine Presser FootCheck price on Amazon
2026 Upgraded Universal Sewing Rolled Hemmer Foot Set 8 SizesCheck price on Amazon
VANICE Roller Presser Foot and Non-Stick Zigzag TeflonCheck price on Amazon
Specs compared
| Model | Shop Score | Sizes | Pieces | Material | Shank | Fit |
|---|---|---|---|---|---|---|
| SUYUN WELL Hem Set | 9.5/10 | 3, 4, 6 mm + 1/4 in | 6 | Stainless steel | Low shank snap-on | Singer, Brother, Janome |
| HONEYSEW Roller Foot | 9.5/10 | Roller foot | 2 | Clear plastic, metal rollers | Low shank snap-on | Singer, Brother, Janome |
| Kraftex 6-Size Set | 9.5/10 | 1/2, 3/4, 1 in + 3, 4, 6 mm | 6 | Not stated | Low shank snap-on | Brother, Singer, Janome |
| Stormshopping Hem Set | 9.4/10 | 3, 4, 6 mm | 3 | Stainless steel | Low shank snap-on | Singer, Brother, Janome |
| TIGARI Hem Foot Set | 9.4/10 | 7, 8, 9, 10 mm | 4 | Stainless steel | Side-mounting screw | Industrial, vintage machines |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings tell you, and what they leave out
We read 5 presser foot listings. 4 of the 5 are rolled hem feet, and 1 is a roller foot for leather and vinyl. 4 of the 5 fit low shank snap-on machines, and 1 needs a side-mounting screw. None states a warranty term with a concrete length.
Buying guide: choosing the best seam roller presser foot
Rolled hem feet
A rolled hem foot turns the raw edge under as you sew, so no pre-folding or ironing is needed. The TIGARI set covers 7, 8, 9 and 10 mm, the Kraftex set covers 3, 4 and 6 mm narrow plus 1/2, 3/4 and 1 in wide, and the Stormshopping and SUYUN WELL sets cover 3, 4 and 6 mm. Match the size to the hem: narrow feet for chiffon, cotton and silk, wider feet for larger hems.
Roller feet for leather
A roller foot feeds leather and vinyl with textured rollers instead of a flat sole. The HONEYSEW foot uses clear plastic with metal rollers for leather, denim, fur, suede, synthetics and napped or piled fabrics, with less friction between the foot and the feed dog. It is the only roller foot in this guide, and the only pick made for leather.
Shank and fit
Shank decides whether the foot snaps on. The Stormshopping, Kraftex, SUYUN WELL and HONEYSEW feet fit low shank snap-on machines, including Singer, Brother, Babylock and Janome. The TIGARI foot needs a side-mounting screw on the machine, fits industrial machines and vintage home sewing machines, and the mounting screw is not included.
Sizes and sets
Sets add sizes and extras. The SUYUN WELL set adds a 1/4 in quilting patchwork foot with an edge guide and 2 sewing clips to its 3 hem feet. The Kraftex set holds 6 sizes, the TIGARI set holds 4 sizes, the Stormshopping set holds 3 sizes, and the HONEYSEW foot is sold as 2 pcs.
Materials
Material decides durability and glide. The TIGARI, Stormshopping and SUYUN WELL feet are stainless steel, and the HONEYSEW foot is clear plastic with metal rollers. The Kraftex set states no material. Stainless steel resists rust, and the HONEYSEW rollers help feed fabric and prevent needle breaking.
Project Match
- Narrow hems on chiffon, cotton and silk: the Stormshopping set or the SUYUN WELL set, in 3, 4 and 6 mm.
- Wide and narrow hems in one set: the Kraftex set, with sizes from 3 mm to 1 in.
- Wider hems on industrial or vintage machines: the TIGARI set, in 7, 8, 9 and 10 mm, with a side-mounting screw.
- Leather, vinyl and denim: the HONEYSEW roller foot, with textured metal rollers.
- Quilting and patchwork: the SUYUN WELL set, with a 1/4 in quilting foot and an edge guide.
How the scores add up
Each foot is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Only 1 of the 5 states a safety-relevant feature, so only 1 pick earns safety points, and none states a warranty term with a concrete length.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUYUN WELL Hem Set | 9.5 | 32 | 22 | 21 | 0 | 0 |
| HONEYSEW Roller Foot | 9.5 | 28 | 20 | 19 | 4 | 0 |
| Kraftex 6-Size Set | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Stormshopping Hem Set | 9.4 | 28 | 20 | 20 | 0 | 0 |
| TIGARI Hem Foot Set | 9.4 | 27 | 20 | 19 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What is a rolled hem presser foot?
It turns the raw edge under as you sew, so no pre-folding or ironing is needed. The metal curl on the foot delivers a clean hem on both sides of the fabric, and the TIGARI, Stormshopping, Kraftex and SUYUN WELL feet are rolled hem feet.
Will these feet fit my sewing machine?
4 of the 5 fit low shank snap-on machines, including Singer, Brother, Babylock and Janome. The TIGARI foot needs a side-mounting screw on the machine, so verify your machine before buying.
Which foot works for leather?
The HONEYSEW roller presser foot, with textured metal rollers for leather, vinyl, denim, fur, suede and synthetics. The other feet are rolled hem feet for fabric, not for leather.
What sizes do the sets include?
The Kraftex set includes 6 sizes, the TIGARI set includes 4 sizes from 7 to 10 mm, and the Stormshopping and SUYUN WELL sets include 3 sizes from 3 to 6 mm. The SUYUN WELL set also includes a 1/4 in quilting foot.
Related: the sewing and embroidery machine hub and our craft machines hub. Also see our sewing machine foot types. Also see our manual sewing machine for leather. Also see our computerized vs mechanical quilting machine.




