Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Metal for Stamping Jewelry (2026): 5 Stamp Sets and Blanks for Hand-Stamped Pieces

Five stamp sets and brass blanks for hand-stamped jewelry, compared by stamp size, steel hardness and what each kit includes.

Best Metal for Stamping Jewelry (2026): 5 Stamp Sets and Blanks for Hand-Stamped Pieces
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1OWDEN 36-Piece SetBest OverallOWDEN 36-Piece Set9.6/10View on Amazon
  2. 2DkOvn 37-Piece KitBest Complete KitDkOvn 37-Piece Kit9.6/10View on Amazon
  3. 3OWDEN 167-Piece KitBest First KitOWDEN 167-Piece Kit9.6/10View on Amazon
  4. 4UNCO 37-Piece SetBest for Leather and WoodUNCO 37-Piece Set9.5/10View on Amazon
  5. 5Hicarer Brass BlanksBest BlanksHicarer Brass Blanks9.5/10View on Amazon

Hand-stamped jewelry starts with a name, a date, or a short phrase pressed into metal, and the metal and the stamps decide how clean that mark looks. A soft blank takes a deep mark with a light hammer blow, while a hard steel stamp keeps its face sharp across many pieces. This guide to the best metal for stamping jewelry compares stamp sets and blank packs by stamp size, steel hardness, blank metal and what each kit includes, so the choice matches the pieces planned for the bench.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall OWDEN 36-Piece Set: 36-piece alloy steel set, 3 mm stamps rated HRC 58-62, with a case. Check price on Amazon
  • Best Complete Kit DkOvn 37-Piece Kit: 37 punches plus a steel bench block and hammer in one box. Check price on Amazon
  • Best First Kit OWDEN 167-Piece Kit: 167 pieces with a hammer, block, blanks and chains for first projects. Check price on Amazon
  • Best for Leather and Wood UNCO 37-Piece Set: 37 hardened steel punches in an orange case for jewelry and leather. Check price on Amazon
  • Best Blanks Hicarer Brass Blanks: 30 brass blanks in gold, silver and rose gold, in rectangle and round shapes. Check price on Amazon

Machines on the list

OWDEN Professional 36Pcs. Steel Metal Stamping

OWDEN Professional 36Pcs. Steel Metal Stamping

OWDEN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 36-piece alloy steel stamp set with 3 mm uppercase letters, numbers and a symbol, rated HRC 58-62, in a plastic case.

Pros

  • Alloy steel punches rated HRC 58-62 for hard metals
  • 36 pieces: 26 uppercase letters, 9 numbers and 1 symbol, with a reverse 6 that works as 9
  • Lists steel, brass, aluminum, silver and stainless steel, plus leather and plastic
  • Sturdy plastic case keeps the set stored and easy to carry

Cons

  • No hammer or bench block in the box
  • No blanks included
  • Uppercase letters only, no lowercase set
  • One size in this listing, 1/8 inch, with other sizes sold separately
Metal Stamping Kit, Including 37pcs Stamps

Metal Stamping Kit, Including 37pcs Stamps

DkOvn9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 37-piece 3 mm punch set with a steel bench block and a double-sided hammer, in a plastic box.

Pros

  • 37 punches: letters A-Z, numbers 0-9, plus a heart and an ampersand
  • Steel bench block, 3 inches across and 3/4 inch thick, with a soft plastic base
  • Double-sided hammer with a forged high-carbon steel head
  • Punches pack into a sturdy plastic box for storage and carrying

Cons

  • No blanks in the box
  • Heart and ampersand are the only symbols
  • One stamp size, 1/8 inch, with no larger size in this listing
  • Built around a 3 inch block, so it suits small jewelry pieces rather than large metalwork
OWDEN 167 Pcs D.I.Y. Hand Stamped Kit,Metal

OWDEN 167 Pcs D.I.Y. Hand Stamped Kit,Metal

OWDEN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 167-piece hand stamping kit with a hammer, metal block, bending bar, blanks, necklaces and jump rings.

Pros

  • 167 pieces cover stamps, blanks, findings and tools in one kit
  • Includes a hammer, a metal block and a bracelet bending bar
  • Blanks in round, washer, pet tag and bracelet shapes, in several sizes
  • 6 necklaces, 30 jump rings and 5 split key rings with chains included

Cons

  • No warranty term is stated
  • The kit mixes tools, blanks and findings, so a maker who only needs stamps buys the rest too
  • Round blanks top out at 1-1/4 inches
  • Ships as a 13.4 x 12.6 x 1.78 inch box, so it needs shelf or drawer space
UNCO- Metal Stamping Kit, 1/8" (3mm), 37 Pack

UNCO- Metal Stamping Kit, 1/8" (3mm), 37 Pack

UNCO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 37-piece hardened steel stamp set with 1/8 inch letters, numbers and a heart symbol, in an orange case.

Pros

  • 37 pieces: uppercase letters, numbers and a heart symbol at 1/8 inch
  • Premium hardened steel for strength and long-term reliability
  • Marks metal, leather and wood with crisp, precise impressions
  • Durable orange storage case keeps the set organized and easy to transport

Cons

  • No warranty term is stated
  • No hammer or bench block in the box
  • No blanks included
  • One stamp size, 1/8 inch, with no larger size in this listing
Hicarer 30 Pcs Metal Stamping Blanks Tag Pendants

Hicarer 30 Pcs Metal Stamping Blanks Tag Pendants

Hicarer9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-piece pack of brass stamping blanks in gold, silver and rose gold, in rectangle and round shapes.

Pros

  • 30 blanks in two shapes, rectangle and round, for pendants and charms
  • Brass with a polished finish, light to carry and slow to rust
  • Rectangle blanks measure 1.37 x 0.24 inch and round blanks 0.47 inch
  • Laser engraving compatible, and suits stamping as well

Cons

  • Blanks only, no stamps, hammer or block
  • Rectangle blanks are 1.37 x 0.24 inch, so only short words fit
  • Round blanks measure 0.47 inch across, so they take a single initial or a short word
  • All three colors are brass underneath, not solid silver or steel

Other machines to compare

Specs compared

Model HQ Score Pieces Stamp size Included Weight Warranty
OWDEN 36-Piece Set 9.6/10 36 1/8 inch (3mm) Punches and case 1.3 lb Not stated
DkOvn 37-Piece Kit 9.6/10 37 1/8 inch (3mm) Punches, bench block, hammer, box Not stated Not stated
OWDEN 167-Piece Kit 9.6/10 167 Not stated Hammer, block, bending bar, blanks, findings Not stated Not stated
UNCO 37-Piece Set 9.5/10 37 1/8 inch (3mm) Punches and orange case Not stated Not stated
Hicarer Brass Blanks 9.5/10 30 Not stated 30 brass blanks 0.11 lb Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (18 November 2026).

Most stamping listings sell punches, not metal

Most listings under this keyword sell the punches, and only one of the five here sells blanks on their own. That split matters because the punch set decides the mark and the blank decides the metal. The Hicarer pack is 30 brass blanks in rectangle and round shapes, while the other four picks are stamp sets with steel punches. The OWDEN 167-piece kit is the only pick that pairs stamps with blanks, a hammer and a block in one box.

Buying guide: best metal for stamping jewelry

Match the stamp size to the blank

Three of the stamp sets here use 1/8 inch (3mm) punches, a size that fits names and dates on pendants, tags and bracelets. The Hicarer rectangle blanks measure 1.37 x 0.24 inch, so they take short words, while the round blanks at 0.47 inch take a single initial or a short word. The OWDEN 167-piece kit adds round blanks up to 1-1/4 inches for longer names, and bracelet blanks in 1/4 inch, 3/8 inch and 5/8 inch widths.

Pick the blank metal first

Brass is the blank metal in the one blanks pack here, and it stamps cleanly with a light hammer blow. The OWDEN 36-piece set lists steel, brass, aluminum, silver and stainless steel among the metals its punches mark, so it covers the common jewelry metals. The UNCO set lists metal, leather and wood. Choose the blank metal first, then the punch set that lists it.

Count what comes in the box

A punch set alone needs a hammer, a bench block and blanks from the bench, while a full kit brings them together. The DkOvn kit includes a steel bench block and a hammer with its 37 punches, and the OWDEN 167-piece kit includes a hammer, a metal block, a bracelet bending bar, blanks and findings. The OWDEN 36-piece set and the UNCO set are punches and a case only, and the Hicarer pack is blanks only.

Steel hardness holds the mark

A punch must be harder than the blank it marks, or the face wears and the mark softens. The OWDEN 36-piece set rates its alloy steel punches at HRC 58-62, the UNCO set uses premium hardened steel, and the DkOvn hammer head is forged from high-carbon steel. Where a listing gives no hardness figure, the punch material still matters: hardened steel outlasts soft steel on repeated work.

Safety

Wear eye protection when striking steel stamps with a hammer, and stamp on a stable bench block on a steady bench. Keep fingers clear of the punch face, and store punches in the case with the faces protected.

Project Match

Pair each project with the pick that fits it, from what each listing states:

  • Name pendants and tags: Hicarer brass blanks in rectangle and round shapes, stamped with a 1/8 inch set.
  • Bracelets and pet tags: the OWDEN 167-piece kit, with bracelet blanks, a bending bar and pet tags.
  • Names and dates on steel, brass, aluminum and silver: the OWDEN 36-piece set, with 26 letters, 9 numbers and 1 symbol.
  • A first bench setup: the DkOvn kit, with 37 punches, a steel bench block and a hammer.
  • Leather and wood marking: the UNCO 37-piece set, listed for metal, leather and wood.

How the scores add up

Each product is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
OWDEN 36-Piece Set 9.6 30 21 21 n/a 0
DkOvn 37-Piece Kit 9.6 29 21 20 n/a 0
OWDEN 167-Piece Kit 9.6 28 20 20 n/a 0
UNCO 37-Piece Set 9.5 27 20 19 n/a 0
Hicarer Brass Blanks 9.5 26 19 19 n/a 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.

FAQ: lasers and CNC

What metal is best for stamping jewelry?

Brass blanks stamp cleanly and take a deep mark, and the Hicarer pack here is brass. The OWDEN 36-piece set lists steel, brass, aluminum, silver and stainless steel as metals it marks. Match the blank metal to the punch set, and stamp a spare blank first to check the depth.

What size stamps do I need for jewelry?

The stamp sets here are 1/8 inch (3mm), a size suited to pendants, tags and bracelets. The Hicarer rectangle blanks measure 1.37 x 0.24 inch and the round blanks measure 0.47 inch, so short words fit best. Larger blanks in the OWDEN 167-piece kit, up to 1-1/4 inch rounds, take longer names.

Do I need a bench block and hammer to stamp jewelry?

A bench block gives the blank a flat steel surface, and a hammer drives the punch into the metal. The DkOvn kit includes a steel bench block and a hammer, and the OWDEN 167-piece kit includes a hammer and a metal block. The OWDEN 36-piece set and the UNCO set are punches only, so pair them with a block and hammer already on the bench.

Can I stamp on stainless steel?

The OWDEN 36-piece set lists stainless steel among the metals it marks, with alloy steel punches rated HRC 58-62. The Hicarer blanks are brass, and the UNCO set lists metal, leather and wood. For hard metals, use the punch set with the stated hardness figure.

What comes in a 167-piece stamping kit?

The OWDEN 167-piece kit includes a hammer, a metal block, a bracelet bending bar, 6 enamel markers, 5 sanding pads, letter and number stamp sets, blanks, 30 stamping working guides, a mini pliers, 6 necklaces at 18 inches, 30 jump rings and 5 split key rings with chains.

Related: best pendant blanks, best dog tag blanks, brass vs titanium dog tags, best jewelry loupe and the jewelry making hub. Also see the engraving pen for beginners guide and the laser engraver hub.

More buying guides