Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Brass vs Titanium Dog Tags: Which One Should You Buy?

Brass vs titanium dog tags compared through solid brass blanks for stamping, with sizes, thickness and pack counts to help you choose.

Brass vs Titanium Dog Tags: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 112 Pcs 40mm X 3mm Brass Coin Blanks for Laser Engraving12 Pcs 40mm X 3mm Brass Coin Blanks for Laser Engraving9.5/10View on Amazon
  2. 2Yinkin 200Pcs Dog Tag Set 100Pcs Dog ID Tags 100Pcs SteelYinkin 200Pcs Dog Tag Set 100Pcs Dog ID Tags 100Pcs Steel9.6/10View on Amazon
  3. 3Brass Military Dog TagsBrass Military Dog Tags9.5/10View on Amazon
  4. 4Solid Brass PET TAGSolid Brass PET TAGView on Amazon
  5. 5Personalized Solid Brass Dog TagPersonalized Solid Brass Dog TagView on Amazon
  6. 6Zhengmy 50 Pcs Round Brass TagsZhengmy 50 Pcs Round Brass TagsView on Amazon
  7. 7Zhengmy 25 Pcs Round Brass TagsZhengmy 25 Pcs Round Brass TagsView on Amazon
  8. 8Brass 3/4" Personalized Name Tag for Dog Collars with 1/4"Brass 3/4" Personalized Name Tag for Dog Collars with 1/4"View on Amazon
  9. 9ABBECIAO 1Inch Circle Brass Blanks 14ga. Thick Smooth EdgesABBECIAO 1Inch Circle Brass Blanks 14ga. Thick Smooth EdgesView on Amazon

A dog tag starts as a blank disc, and brass vs titanium dog tags is the question to settle before you buy blanks for stamping. Both blanks in this guide are brass, and no titanium blank is listed here, so the titanium side is covered only as the other side of the question. Between the brass blanks, pick the larger, thinner blank in the bigger pack for batches of tags, and pick the smaller, thicker blank in the smaller pack for a small run of tags.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

This guide lists brass blanks only. No titanium blank is listed here, so the titanium side of the question has no product to point to.

Brass vs titanium dog tags at a glance

Brass is the metal in both blanks in this guide. The maker of the larger blank lists brass as sturdy, reliable and non-corrosive, oil and water resistant, with good durability even outdoors. The maker of the smaller blank lists high-quality solid brass with deburred edges and a smooth, shiny surface. Both blanks are sold for stamping and engraving, and each blank has a hole already punched. For more on metals that take engraving, see the best metal for laser engraving guide.

Titanium is the other side of this question, and this guide has no titanium blank to compare. That matters because the choice between brass and titanium cannot be settled from the blanks listed here. What this guide can settle is the choice between the brass blanks, and the sections below do that from the sizes, thickness, holes and packs the makers state. A related comparison is the brass vs stainless steel dog tags guide.

What the brass blanks offer

The Zhengmy blank is a round brass tag with a diameter of 1-1/4 inch and a thickness of 0.03 inch, with a hole of 3/16 inch in the top center. The pack holds 50 pieces, and the maker lists uses that include valve tags, plant signs, equipment tags and pet IDs. The brass is listed as sturdy, reliable and non-corrosive, oil and water resistant, with good durability even outdoors. Each tag has a pre-punched hole, so you can choose the right fastener for the tag.

The ABBECIAO blank is a round brass disc with a diameter of 1 inch, or 25 mm, and a thickness of 0.06 inch, or 1.5 mm, about 14 gauge, with one hole. The pack holds 10 pieces, and the blanks are covered with transparent vinyl on both sides to prevent scratching in transit, which you peel off before stamping. The maker lists uses that include dog ID tags, custom keychains, jewelry, badges, tokens, charms, pendants and keepsakes. The edges are deburred, and the surface is smooth and shiny.

How to choose between the brass blanks

Size comes first. The Zhengmy blank measures 1-1/4 inch across, and the ABBECIAO blank measures 1 inch across, so the Zhengmy blank gives more room for a name, a number or a design, and the ABBECIAO blank fits a smaller tag. Thickness comes next. The Zhengmy blank is 0.03 inch thick, and the ABBECIAO blank is 0.06 inch thick, about 14 gauge, so the ABBECIAO blank is thicker.

Pack size follows the job. The Zhengmy pack holds 50 pieces, which suits batches of tags for pets, plants, valves or equipment, and the ABBECIAO pack holds 10 pieces, which suits a small run of tags. The hole matters too. The Zhengmy hole is 3/16 inch in the top center, and the ABBECIAO blank has one hole, and its hole size is Not stated. Check the hole against the fastener you plan to use before you order. For the machine side, see the best laser engraver for metal guide.

Common mistakes to avoid

  • Ordering without checking the diameter, thickness and hole size against the tag you need.
  • Stamping the ABBECIAO blank before peeling off the transparent vinyl on both sides.
  • Picking a blank by pack size alone, when the diameter and thickness decide whether the tag fits the job.
  • Expecting a titanium blank in this guide, when both blanks listed here are brass.
  • Using a fastener that does not fit the 3/16 inch hole on the Zhengmy blank.

Brass vs titanium dog tags: the short version

  1. Both blanks in this guide are brass, and no titanium blank is listed here.
  2. Pick the Zhengmy blank for a 1-1/4 inch tag in a pack of 50 pieces.
  3. Pick the ABBECIAO blank for a 1 inch tag at 0.06 inch thick in a pack of 10 pieces.
  4. Peel the vinyl film off the ABBECIAO blank before stamping.
  5. Check the diameter, thickness and hole size before you order.

FAQ: lasers and CNC

Are the dog tags in this guide made of brass or titanium?

Both blanks in this guide are brass. The Zhengmy blank and the ABBECIAO blank are both solid brass, and no titanium blank is listed here.

What size are the brass blanks?

The Zhengmy blank is 1-1/4 inch in diameter and 0.03 inch thick, with a hole of 3/16 inch. The ABBECIAO blank is 1 inch in diameter and 0.06 inch thick, about 14 gauge, with one hole.

How many blanks come in each pack?

The Zhengmy pack holds 50 pieces, and the ABBECIAO pack holds 10 pieces.

Do the blanks come ready to stamp?

The ABBECIAO blanks are finished and ready to stamp, with transparent vinyl on both sides that you peel off before stamping. The Zhengmy blanks are sold for stamping, with a pre-punched hole in the top center of each tag.

Can the blanks be used for dog ID tags?

The maker of the Zhengmy blank lists pet IDs among its uses, and the maker of the ABBECIAO blank lists dog ID tags among its uses. Both blanks are sold as blanks for stamping and engraving, so you stamp the text yourself.

What fastener fits the hole?

The Zhengmy hole is 3/16 inch in the top center, and you choose the right fastener for the tag. The ABBECIAO blank has one hole, and its hole size is Not stated, so check the fastener against the blank before you order.

Related: the engraving materials hub, aluminum vs brass dog tags and brass vs stainless steel dog tags. Also see the best metal for laser engraving guide.

More buying guides