Best Hss Reamer Set (2026): 5 Sets Compared and Scored
Five HSS reamer sets compared by piece count, size range, flute type and stated material, from a 29-piece fractional set to M35 taper reamers.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAccusize Spiral 5 Pc9.7/10View on Amazon - 2
Best M35 SetRiyhch M35 4 Pc Set9.7/10View on Amazon - 3
Widest RangeAccusize 29 Pc Set9.6/10View on Amazon - 4
Best M2 SetJerax M2 4 Pc Set9.6/10View on Amazon - 5
Best Bridge SetSZRKRLA 4 Pc Set9.6/10View on Amazon
A bolt hole that is a hair too small or a touch off line holds up the whole assembly, and the best hss reamer set is the kit that opens the hole to size and lines it up without tearing the edge. This article compares five HSS reamer sets by piece count, size range, flute type and stated material, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Accusize Spiral 5 Pc: 5 spiral flute reamers, gold oxide, stop collar, fitted box Check price on Amazon
- Best M35 Set Riyhch M35 4 Pc Set: M35 HSS with more cobalt than M2, 5-spiral flute, taper point Check price on Amazon
- Widest Range Accusize 29 Pc Set: 29 sizes from 1/16 to 1/2 in by 1/64, tolerance to +0.0005 in Check price on Amazon
- Best M2 Set Jerax M2 4 Pc Set: M2 HSS, spiral flutes, safety stop, for mild steel and alloys Check price on Amazon
- Best Bridge Set SZRKRLA 4 Pc Set: 4 bridge reamers with taper point and aluminum box Check price on Amazon
Machines on the list

Accusize Chucking Reamer Set, 3/8", 1/2", 9/16"
A 5-piece spiral flute set in gold oxide HSS, sizes 3/8 to 3/4 in with a stop collar and fitted box.
Pros
- 5 sizes from 3/8 to 3/4 in in one fitted box
- Spiral flute with 5 flutes and gold oxide finish
- Stop collar keeps the reamer from running through the hole
- 3-equal-flat shank fits 3/8 or 1/2 in chucks
Cons
- No warranty term is stated
- No safety standard is stated
- No tolerance figure is stated
- No flute length is stated

4PCS M35 HSS Taper Chucking Reamer Set
A 4-piece M35 HSS taper reamer set, sizes 3/8 to 3/4 in with 5-spiral flutes, for aligning and enlarging existing holes.
Pros
- M35 HSS with more cobalt than M2, stronger and more durable per the listing
- 5-spiral flute with taper point for overlapping holes
- 4 sizes from 3/8 to 3/4 in, fits 3/8 or 1/2 in shank chucks
- Suits steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper and cast iron per the listing
Cons
- No warranty term is stated
- No safety standard is stated
- Needs an existing hole or a pilot hole smaller than the reamer
- No flute length or overall length is stated

Accusize HSS Chucking Reamer Set 1/16 to 1/2
A 29-piece fractional HSS reamer set from 1/16 to 1/2 in by 1/64, with a stated tolerance of +0.0001 to +0.0005 in.
Pros
- 29 sizes from 1/16 to 1/2 in by 1/64 steps
- Tolerance of +0.0001 to +0.0005 in stated
- Straight flute, right-hand cut for smooth, precise cuts per the listing
- Designed for lathes, drill presses and milling machines
Cons
- No warranty term is stated
- No safety standard is stated
- Uncoated finish; no coating stated

3/8" 1/2" 5/8" 3/4" 4Pcs M2 Chucking Reamer Set
A 4-piece M2 HSS chucking reamer set, sizes 3/8 to 3/4 in with spiral flutes and a safety stop, for mild steel and alloys.
Pros
- M2 HSS with 50% more tungsten and 150% more molybdenum than lower grade HSS per the listing
- Spiral flutes with left helix and right hand cut
- Safety collar stop to keep the reamer from over penetration
- States up to 3/8 in thick mild steel for impact driver and 1 in thick for magnetic drill press
Cons
- No warranty term is stated
- No safety standard is stated
- Frequent use on stainless steel needs a higher grade per the listing
- Needs an existing hole or a pilot hole

4Pcs Drill Bridge/Construction Reamer Bit Set 3/8"
A 4-piece HSS bridge reamer set, sizes 3/8 to 3/4 in with a taper point and aluminum box, for structural materials.
Pros
- Taper point enters irregular overlapping holes to align them
- Three flats on the shank give a secure grip for portable power and air tools
- Suits steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper and cast iron per the listing
- Aluminum box stated
Cons
- No warranty term is stated
- No safety standard is stated
- Material field lists alloy steel, brass, HSS and stainless steel together
- No flute length or overall length is stated
Other machines to compare
Accusize HSS Chucking Reamer Set Letter Size A to ZCheck price on Amazon
NEIKO 10047A Extra Long Drill Bit SetCheck price on Amazon
5PCS Countersink Drill Bit SetCheck price on Amazon
toolant Center Drill Bit SetCheck price on Amazon
Specs compared
| Reamer Set | HQ Score | Pieces | Sizes | Flutes | Material |
|---|---|---|---|---|---|
| Accusize Spiral 5 Pc | 9.7/10 | 5 | 3/8 to 3/4 in | 5 | HSS, gold oxide |
| Riyhch M35 4 Pc Set | 9.7/10 | 4 | 3/8 to 3/4 in | 5 | M35 HSS |
| Accusize 29 Pc Set | 9.6/10 | 29 | 1/16 to 1/2 in | Not stated | HSS |
| Jerax M2 4 Pc Set | 9.6/10 | 4 | 3/8 to 3/4 in | 4 | M2 HSS |
| SZRKRLA 4 Pc Set | 9.6/10 | 4 | 3/8 to 3/4 in | 5 | HSS |
Specs are what each manufacturer publishes as its rating on the listing, collected 25 October 2026.
How to choose the best hss reamer set
Spiral flute or straight flute
Four of the five sets use spiral flutes, and one uses straight flutes. The Accusize 5 Pc set, the Jerax M2 set, the Riyhch M35 set and the SZRKRLA set all list spiral flutes. The Accusize 29 Pc set uses a straight flute with a right-hand cut, which the listing states gives smooth, precise cuts and an excellent surface finish. See the roughing vs finishing end mill guide for how flute style changes the cut.
M2 or M35
The grade decides how long the edge holds on harder stock. Jerax states its M2 has 50% more tungsten and 150% more molybdenum than lower grade HSS, and suits frequent use on mild steel and occasional use on stainless steel. Riyhch states its M35 has more cobalt than M2, which makes it stronger and more durable. See the HSS vs cobalt end mill guide for how cobalt changes the steel.
Five sizes or twenty-nine
Four of the sets cover the same four sizes: 3/8, 1/2, 5/8 and 3/4 in. The Accusize 5 Pc set adds 9/16 in, while the Accusize 29 Pc set covers 1/16 to 1/2 in by 1/64 steps, with a stated tolerance of +0.0001 to +0.0005 in. A four-piece taper set suits bridge and construction holes; the fractional set suits a lathe or drill press where the hole size must land on a tight number.
Check the spec table against the title
Two listings here disagree with their own spec tables, so read both before buying. The Accusize 29 Pc title says 29 pieces while its spec table says piece per set is 25. The SZRKRLA spec table lists the material as alloy steel, brass, high speed steel and stainless steel together. The Jerax spec table lists finish types as Aluminum.
Project Match
- Enlarging bolt holes in bridge and construction steel: Jerax, Riyhch and SZRKRLA taper reamers, for mild steel, alloys and aluminum.
- Fine hole sizing on a lathe or drill press: Accusize 29 Pc fractional set, 1/16 to 1/2 in by 1/64, for lathes, drill presses and milling machines.
- General hole enlarging in metal and wood: Accusize 5 Pc spiral set for metal; Jerax and SZRKRLA also list wood and plastic.
- Occasional stainless steel work: Jerax M2, occasional use on stainless steel per the listing; frequent stainless use points to M35 reamers.
How the scores add up
Each set is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing here states a safety standard or a warranty term, so every set scores zero on those two criteria; the ranking comes from the other three.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Accusize Spiral 5 Pc | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Riyhch M35 4 Pc Set | 9.7 | 32 | 21 | 21 | n/a | 0 |
| Accusize 29 Pc Set | 9.6 | 32 | 21 | 20 | n/a | 0 |
| Jerax M2 4 Pc Set | 9.6 | 30 | 21 | 20 | n/a | 0 |
| SZRKRLA 4 Pc Set | 9.6 | 29 | 20 | 20 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
What size drill do I need before reaming?
Start with a pilot hole smaller than the reamer. Both the Jerax and Riyhch listings state that an existing hole or a pilot hole is needed. No listing here states a drill size for a given reamer size.
How much material can a reamer cut?
Jerax states up to 3/8 in thick mild steel for an impact driver and 1 in thick for a magnetic drill press. The other listings state no thickness limit.
Which reamer set covers the most sizes?
The Accusize 29 Pc set covers 1/16 to 1/2 in by 1/64 steps. The other four sets cover 3/8 to 3/4 in, with the Accusize 5 Pc set adding 9/16 in.
What is the difference between M2 and M35?
Jerax states its M2 has 50% more tungsten and 150% more molybdenum than lower grade HSS. Riyhch states its M35 has more cobalt than M2, which makes it stronger and more durable.
Do any of these list a warranty?
No. None of the five listings states a warranty term, so warranty scores zero for every set.
Related: HSS vs cobalt end mill, roughing vs finishing end mill, best CNC machine for home shop, and the CNC tooling hub.




