Best Glass Cutter (2026): 4 Picks for Stained Glass
Four glass cutters for stained glass, mosaics and mirrors, compared by wheel, glass range, oil feed and what each box holds.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVALOGRIT 4-Head Cutter9.7/10View on Amazon - 2
Best 3-PackTOYO TC17B 3-Pack9.7/10View on Amazon - 3
Best KitYEYETUO Glass Kit9.6/10View on Amazon - 4
Best Single CutterTOYO TC17BV TAP Wheel9.6/10View on Amazon
A stained glass panel starts as a sheet of glass, a pattern, and a steady hand. The cutter turns the pattern into pieces with a clean score and a break along the line. The best glass cutter for a maker scores cleanly on the glass used most, keeps its wheel oiled, and stays steady through a long cutting session. This guide compares the cutters side by side on wheel, glass range, oil feed, and what arrives in the box, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall VALOGRIT 4-Head Cutter: Four interchangeable carbide heads cover 2 to 20 mm glass, with an automatic oil feed, a bottle of cutting oil and a screwdriver in the box. Check price on Amazon
- Best 3-Pack TOYO TC17B 3-Pack: A 3-pack of brass-handled supercutters, made in Japan, with a tungsten carbide wheel set at 140 degrees for 2 to 6 mm glass. Check price on Amazon
- Best Kit YEYETUO Glass Kit: A full stained glass kit with nippers, running pliers, breaker grozer pliers, 3 cutting heads and a canvas bag, for glass from 2 to 20 mm. Check price on Amazon
- Best Single Cutter TOYO TC17BV TAP Wheel: The same brass barrel and 140 degree wheel as the TC17B, with TAP wheel technology, in a single cutter. Check price on Amazon
Machines on the list

VALOGRIT Self-Oiling Glass Cutter 2-20 mm
A self-oiling cutter with 4 interchangeable carbide heads for glass from 2 to 20 mm, with a bottle of cutting oil and a screwdriver in the box.
Pros
- Four interchangeable carbide heads cover glass from 2 to 20 mm
- Automatic oil feed keeps the wheel lubricated while scoring
- Textured pen-style handle for steady pressure and a stable angle
- Oil bottle and screwdriver included, so the kit is complete from the start
Cons
- No warranty term is stated
- Heads change with the included screwdriver, so swaps are not tool-free
- The oil feed valve opens only while pressing down
- Four separate heads to store and keep track of

TOYO TC17B | Self-Oiling Glass Cutter
A 3-pack of brass-handled self-oiling supercutters, made in Japan, with a tungsten carbide wheel set at 140 degrees for glass from 2 to 6 mm.
Pros
- Three cutters in the box, so a spare is always ready
- Brass barrel, precision honed, with a tungsten carbide wheel
- 140 degree wheel angle for glass from 2 to 6 mm
- Hexagonal end cap keeps the cutter from rolling off the bench
Cons
- Glass range tops out at 6 mm, so thicker glass needs another cutter
- No cutting oil is listed as included
- Three identical cutters, so no variety of heads
- No warranty term is stated

TOYO TC17BV | Self-Oiling Glass Cutter
A single brass-handled self-oiling supercutter with TAP wheel technology, made in Japan, with a tungsten carbide wheel set at 140 degrees for glass from 2 to 6 mm.
Pros
- TAP wheel technology on a brass-handled supercutter
- Brass barrel, precision honed, with a tungsten carbide wheel
- 140 degree wheel angle for glass from 2 to 6 mm
- Hexagonal end cap keeps the cutter from rolling off the bench
Cons
- Single cutter, so no spare in the box
- Glass range tops out at 6 mm, so thicker glass needs another cutter
- No cutting oil is listed as included
- One fixed head, so other thicknesses need another cutter

YEYETUO Glass Cutter, 2-20MM Glass Cutting Tool
A stained glass kit with a pencil-style self-oiling cutter, 3 cutting heads for glass from 2 to 20 mm, running pliers, breaker grozer pliers, nippers and a canvas bag.
Pros
- Three cutting heads cover 2 to 6, 6 to 12 and 12 to 20 mm glass
- Running pliers, breaker grozer pliers and tile nippers are in the box
- Automatic oil feed lubricates the wheel while scoring
- Polymer tips protect glass and mirrors from scratches
Cons
- Cutting oil is not included and must be prepared separately
- The listing states no warranty
- Many separate pieces to store and keep track of
- At 1.66 lb it is the heaviest pick in this guide
Specs compared
| Cutter | HQ Score | Glass range | Wheel | Heads | Oil feed | In the box | Warranty |
|---|---|---|---|---|---|---|---|
| VALOGRIT 4-Head Cutter | 9.7/10 | 2 to 20 mm | Tungsten carbide | 4 interchangeable | Automatic, bottle included | Cutter, 4 heads, oil, screwdriver | Not stated |
| TOYO TC17B 3-Pack | 9.7/10 | 2 to 6 mm | Tungsten carbide, 140 degrees | 1 straight blade | Self-oiling | 3 cutters | Not stated |
| TOYO TC17BV TAP Wheel | 9.6/10 | 2 to 6 mm | Tungsten carbide, 140 degrees, TAP wheel | 1 straight blade | Self-oiling | 1 cutter | Not stated |
| YEYETUO Glass Kit | 9.6/10 | 2 to 20 mm | Tungsten steel | 3 (2 to 6, 6 to 12, 12 to 20 mm) | Automatic, oil not included | Cutter, 3 heads, nippers, 2 pliers, scribe, dropper, screwdriver, bag | No warranty stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (22 November 2026). Glass range is the thickness each listing states the cutter handles.
What the listings tell you, and what they leave out
Four listings were read for this guide. Two are TOYO brass supercutters made in Japan, one is a VALOGRIT cutter with 4 heads, and one is a YEYETUO kit with pliers and nippers. Two listings state a weight: the TOYO TC17BV at 0.4 lb and the YEYETUO kit at 1.66 lb. Only one listing states a warranty term, and that term is No Warranty. None of the four states a safety certification, so safety scores nothing here.
The listings are generous about glass range and kit contents, and quiet about the rest. Neither TOYO listing states a weight for the 3-pack or a warranty term, and the VALOGRIT listing states neither a weight nor dimensions. Read the range and the box contents first, since those are the figures every listing publishes.
Buying guide: choosing the best glass cutter
Wheel angle and glass range
The TOYO cutters share a tungsten carbide wheel set at 140 degrees, listed for glass from 2 to 6 mm. That range covers thin stained glass and window glass. The VALOGRIT cutter and the YEYETUO kit cover glass from 2 to 20 mm with interchangeable heads, so thicker flat glass and tile work stay in reach. Match the range to the thickest glass in the project pile, since a cutter that tops out at 6 mm leaves thicker pieces for another tool.
Oil feed
Every cutter here is self-oiling, which means oil feeds to the wheel while scoring. The VALOGRIT cutter opens its oil-feed valve while pressing down, so the wheel stays lubricated through the score, and a bottle of glass-cutting oil is in the box. The YEYETUO kit has an automatic oil-feed system and an oil dropper, but oil is not included and must be prepared separately. Neither TOYO listing names an oil bottle in the box, so plan on oil from the shelf for those two.
Kits versus single cutters
A kit buys the breaking tools with the cutter. The YEYETUO kit includes tile nippers, running pliers, breaker grozer pliers, a tungsten scribe engraving pen, an oil dropper, a screwdriver and a canvas bag, alongside the cutter and 3 cutting heads. The VALOGRIT box is narrower: cutter, 4 heads, a bottle of oil and a screwdriver. The TOYO TC17B is a 3-pack of the same cutter, which suits a bench that wears cutters out, while the TOYO TC17BV is a single cutter for a maker who needs one good handle.
Handles and grip
Handle shape decides how steady the score feels. The TOYO cutters have a sturdy brass barrel, precision honed, with a hexagonal end cap that keeps the cutter from rolling off the bench. The VALOGRIT cutter has a textured pen-style handle that sits firmly in the hand for steady pressure and a stable angle. The YEYETUO cutter has an ergonomic handle with adjustable screws and spring-loaded jaws for control over the cut.
Project Match
- Stained glass panels and suncatchers: the YEYETUO kit, with running pliers, breaker grozer pliers and 3 heads for glass from 2 to 20 mm.
- Cutting the same thin glass again and again: the TOYO TC17B 3-pack, with a 140 degree wheel for glass from 2 to 6 mm.
- A mix of thin and thick flat glass: the VALOGRIT cutter, with 4 heads for glass from 2 to 20 mm and oil in the box.
- A single classic cutter for the bench: the TOYO TC17BV, with TAP wheel technology and a brass barrel.
- Mirrors and mosaics: the YEYETUO kit, listed for mirrors, mosaics and tiles, with polymer tips that protect the surface.
How the scores add up
Each cutter is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VALOGRIT 4-Head Cutter | 9.7 | 32 | 21 | 22 | n/a | 0 |
| TOYO TC17B 3-Pack | 9.7 | 30 | 22 | 21 | n/a | 0 |
| TOYO TC17BV TAP Wheel | 9.6 | 30 | 22 | 20 | n/a | 0 |
| YEYETUO Glass Kit | 9.6 | 29 | 20 | 21 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
How do I use a glass cutter?
Score the glass with the wheel, then break along the score. The VALOGRIT cutter opens its oil-feed valve while pressing down, so the wheel stays lubricated through the score. The YEYETUO kit includes running pliers and breaker grozer pliers for breaking the scored glass.
What is glass cutter oil?
Oil that feeds through the cutter to the wheel while scoring, keeping the wheel lubricated for a clean, continuous score. The VALOGRIT cutter feeds oil automatically and includes a bottle of glass-cutting oil. The YEYETUO kit includes an oil dropper, with oil not included.
Can a tile cutter cut glass?
None of the four listings describes a tile cutter cutting glass. The YEYETUO kit is listed for tiles, mosaics, stained glass, mirrors and glass fusing, so one kit covers both tile and glass work. The other three picks are glass-only cutters.
How do I use a glass cutter on a mirror?
Use a cutter listed for mirrors. The YEYETUO kit lists mirrors among its uses, and its high-density synthetic polymer tips protect glass and mirrors from scratches and chips during use.
What thickness of glass can these cutters handle?
The TOYO cutters are listed for glass from 2 to 6 mm. The VALOGRIT cutter and the YEYETUO kit are listed for glass from 2 to 20 mm, with interchangeable heads. The YEYETUO heads cover 2 to 6, 6 to 12 and 12 to 20 mm.
Related: the glass crafts hub and all pottery and glass guides. Also see our best stained glass kit. Also see our best beginner stained glass kit. Also see our stained glass diy kit. Also see our best engraving pen for glass. Also see our glass cutter vs glass bottle cutter. Also see our best drill bit for cutting glass.




