Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Stained Glass DIY Kit: A Beginner Guide to Your First Suncatcher

A stained glass diy kit gives a beginner pre-cut glass, solder and a pattern for a first suncatcher, with a soldering iron still to buy.

Stained Glass DIY Kit: A Beginner Guide to Your First Suncatcher
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Pre Cut Stained Glass Kit for AdultsPre Cut Stained Glass Kit for Adults9.7/10View on Amazon
  2. 2ForraFun 1 Set Unfinished Celtic Knot Pre CutForraFun 1 Set Unfinished Celtic Knot Pre Cut9.6/10View on Amazon
  3. 3LemonRoad 4 Set Butterfly Pre Cut Stained GlassLemonRoad 4 Set Butterfly Pre Cut Stained Glass9.6/10View on Amazon

A stained glass diy kit is a box with pre-cut glass pieces, solder and a pattern for a suncatcher, and it lets a beginner start stained glass without buying glass sheets and cutting tools. The kits below each cover the solder step; the CRAFTICO and ForraFun kits cover the foil step too. Each of them still needs a soldering iron, which none of them includes. Pick the kit by the design you want and whether flux is in the box.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Pre Cut Stained Glass Kit for Adults

Pre Cut Stained Glass Kit for Adults

CRAFTICO9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A beginner kit with pre-cut smooth-edged glass, copper foil, solder, gel flux and a photo guide for a first suncatcher.

Pros

  • Every glass piece comes pre-cut and smooth-edged, ready to assemble
  • Copper foil, solder and gel flux with brush are all included
  • Step-by-step photo guide walks through every step
  • One Year Warranty is stated

Cons

  • Soldering iron is not included
  • One design only; the kit makes a single suncatcher style
  • No finished size is stated
  • One kit makes one suncatcher, so a group needs one kit per person
ForraFun 1 Set Unfinished Celtic Knot Pre Cut

ForraFun 1 Set Unfinished Celtic Knot Pre Cut

ForraFun9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single Celtic knot kit with pre-cut glass, copper foil tape and solder wire, finished at about 6.9 by 6.7 in.

Pros

  • Copper foil tape, solder wire, brush and burnishing tool are included
  • Finished Celtic knot measures about 6.9 by 6.7 in
  • Detailed pattern sheet and a pen are included
  • Jump rings and metal chains are included for hanging

Cons

  • Flux is not included and must be bought separately
  • Soldering iron is required and sold separately
  • One design only; the kit makes a single Celtic knot
  • No photo guide is stated
LemonRoad 4 Set Butterfly Pre Cut Stained Glass

LemonRoad 4 Set Butterfly Pre Cut Stained Glass

LemonRoad9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-set butterfly kit with pre-cut glass in 4 styles, solder wire, chains and a burnishing tool for groups and gifts.

Pros

  • Four butterfly suncatchers in 4 styles from one kit
  • Solder wire, jump rings, metal chains, brush and burnishing tool are included
  • Finished butterflies measure about 4 by 3.2 in, a small window size
  • Detailed pattern sheet and instructions are included

Cons

  • Soldering iron is required and sold separately
  • No copper foil is listed among the included materials
  • Each finished butterfly is small at about 4 by 3.2 in
  • No step-by-step photo guide is stated

What a stained glass diy kit includes

A kit solves sourcing. Each kit here ships pre-cut glass, so the first piece needs no glass cutter. The CRAFTICO kit covers the foil, solder and flux steps: copper foil, solder, gel flux with a brush, a burnishing stick, a pattern, a hanging chain and a step-by-step photo guide. The ForraFun kit includes copper foil tape, solder wire, jump rings, metal chains, a brush, a burnishing tool, a pattern sheet and a pen, and states that flux is not included. The LemonRoad kit holds four butterfly sets with solder wire, jump rings, metal chains, a brush, a burnishing tool, a pattern sheet and instructions. None of the three includes a soldering iron, so plan on buying one. If you want a wider comparison before choosing, see our best beginner stained glass kit guide.

How to make a suncatcher from a kit

The build follows the same order for a copper-foil suncatcher: foil, solder, hang.

  1. Lay the pre-cut pieces on the pattern sheet.
  2. Wrap the glass edges with copper foil and press it flat with the burnishing tool.
  3. Brush flux on the foil seams; the CRAFTICO kit includes gel flux with a brush, while the ForraFun kit states flux is not included and the LemonRoad kit lists none, so buy it before starting.
  4. Solder the seams with the iron, then attach the hanging chain or rings that came with the kit. Our best soldering iron for beginners guide covers the tool none of these kits includes.

Solder with ventilation, eye protection and a heat-proof surface. Soldered suncatchers are window decorations, not food-contact items.

Stained Glass DIY Kit Picks for a First Suncatcher

The foil and solder steps are where the kits differ, so the picks below are ranked by what each kit includes for those steps.

FAQ: lasers and CNC

What is included in a stained glass diy kit?

Pre-cut glass pieces, solder wire, a pattern and a hanging chain or rings. Copper foil comes with the CRAFTICO and ForraFun kits; the LemonRoad kit lists none. The CRAFTICO kit also includes gel flux with a brush and a photo guide, while the other two include a brush and a burnishing tool. None of the three includes a soldering iron.

Do I need a soldering iron for a stained glass kit?

Yes. All three kits state that a soldering iron is required for assembly and sold separately.

What size suncatcher do these kits make?

The ForraFun Celtic knot finishes at about 6.9 by 6.7 in, and each LemonRoad butterfly finishes at about 4 by 3.2 in. The CRAFTICO kit states no finished size.

Is flux included in these kits?

Only in the CRAFTICO kit, which includes gel flux with a brush. The ForraFun kit states flux is not included, and the LemonRoad kit lists no flux among its materials.

Can I hang the finished suncatcher in a window?

Yes. The LemonRoad and ForraFun kits include jump rings and metal chains, and the CRAFTICO kit includes a hanging chain. Both listings describe the finished pieces as window art for windows, gardens and glass doors.

Do I need ventilation when soldering stained glass?

Yes. Solder with ventilation, eye protection and a heat-proof surface.

Related: the pottery and glass hub, glass crafts and best stained glass kit. Also see our best stained glass kit for adults. Also see our how to do stained glass.

More buying guides