Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Fiberglass Epoxy Resin (2026): 4 Resins Compared

Four fiberglass epoxy resins compared on mix ratio, pot life, clear coating and warranty, with every figure taken from the listings.

Best Fiberglass Epoxy Resin (2026): 4 Resins Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1West System 105-BBest OverallWest System 105-B9.6/10View on Amazon
  2. 2TotalBoat Clear EpoxyBest Clear CoatingTotalBoat Clear Epoxy9.6/10View on Amazon
  3. 3TotalBoat 5:1 EpoxyBest for Fiberglass LayupTotalBoat 5:1 Epoxy9.6/10View on Amazon
  4. 4J-B Weld Resin QuartBest for Small RepairsJ-B Weld Resin Quart9.5/10View on Amazon

A fiberglass repair starts with the resin: the right mix wets out the cloth, bonds to the hull and sets into a solid that can be sanded and painted. This guide compares the best fiberglass epoxy resin kits for boat building, fiberglass repairs and laminating, using only what each maker states about mix ratio, pot life, clear coating and warranty. The resins below run from a quart for small repairs to gallon kits for building and laminating.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall West System 105-B: A .98 gallon resin base with four hardener options, 5 to 1 and 3 to 1 mix ratios, and a stated 1 year warranty. Check price on Amazon
  • Best Clear Coating TotalBoat Clear Epoxy: A 1.5 gallon kit with a 2 to 1 mix ratio, a clear non-blushing hardener, and low odor and low VOCs. Check price on Amazon
  • Best for Fiberglass Layup TotalBoat 5:1 Epoxy: A 1 gallon kit with a 5 to 1 mix ratio, color-coded pumps, and a 20 minute pot life with slow hardener at 75°F. Check price on Amazon
  • Best for Small Repairs J-B Weld Resin Quart: A quart of two-component resin that dries in 2 hours for repairs on fiberglass, rigid plastics, metal and concrete. Check price on Amazon

Machines on the list

West System 105-B Epoxy Resin, .98 Gallon

West System 105-B Epoxy Resin, .98 Gallon

West System9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A .98 gallon clear, pale yellow, low-viscosity epoxy resin base for laminating and coating wood or fiberglass.

Pros

  • Four hardener options with 5 to 1 and 3 to 1 mix ratios for different working times and finishes
  • Hardens to a high-strength solid that is functionally waterproof and highly resistant to moisture vapor
  • Works with fillers, additives and pigments for fairing compounds, joints and pigmented coatings
  • A 1 year warranty is stated, the only warranty term in this guide

Cons

  • Sold as the resin base, so a WEST SYSTEM hardener is needed to mix and set it
  • The .98 gallon size covers less volume than the 1 gallon and 1.5 gallon kits here
  • A blush-free clear finish needs the 207 Extra Clear Hardener at a 3 to 1 ratio
  • Working time depends on which of the four hardeners is used, so it is not fixed by the resin alone
TotalBoat High Performance Clear Marine Epoxy

TotalBoat High Performance Clear Marine Epoxy

TotalBoat9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.5 gallon kit of low-viscosity clear marine epoxy resin with a non-blushing hardener, mixed 2 parts resin to 1 part hardener.

Pros

  • Clear, non-blushing hardener with no washdowns between coats, stated as ideal for clear coating
  • Low odor and low VOCs, described by the maker as great for shop or indoor use
  • Slow, medium or fast hardener choice controls working properties and setting times
  • Metered resin and hardener pumps provide the exact 2 to 1 ratio for a proper set

Cons

  • The slow hardener has the longest working and setting times, so clear coats take longer with that choice
  • The 1.5 gallon kit suits bigger projects rather than small repairs
  • The 15.0 by 9.0 by 11.0 inch kit takes more shelf space than the quart J-B Weld resin
  • The 2 to 1 ratio must be measured exactly
TotalBoat 5:1 Marine Epoxy Resin for Fiberglass

TotalBoat 5:1 Marine Epoxy Resin for Fiberglass

TotalBoat9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 gallon kit of marine epoxy resin mixed 5 parts resin to 1 part hardener, with slow hardener and color-coded pumps included.

Pros

  • Bonds wood, steel, lead, etched aluminum, fiberglass and carbon fiber
  • Pot life of 20 minutes with slow hardener and 12 minutes with fast hardener at 75°F
  • Mixed viscosity and self-leveling properties suit wetting out fiberglass cloth
  • Color-coded pumps and mixing supplies are included in the kit

Cons

  • Not intended for clear coating
  • No warranty term is stated
  • The 20 minute pot life with slow hardener leaves a short working window
  • Sets to a clear amber color rather than a water-clear finish
J-B Weld Fiberglass Resin - Quart - Bath

J-B Weld Fiberglass Resin - Quart - Bath

J-B Weld9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A quart of two-component fiberglass resin for waterproof, durable repairs to holes, cracks and gaps in pools, boats, tubs and showers.

Pros

  • Dries in 2 hours for repairs on fiberglass, rigid plastics, metal and concrete
  • Works with fiberglass cloth or mat for reinforcement strength
  • Two-component resin system for small and large gaps, holes and cracks
  • A quart size that suits single repairs without a gallon kit

Cons

  • The quart size is the smallest kit here, so it suits single repairs rather than big projects
  • No warranty term is stated
  • A repair resin for holes and cracks, rather than a laminating resin for building
  • Fiberglass cloth or mat is needed for reinforcement strength

Specs compared

Resin HQ Score Kit size Mix ratio Pot life Clear coating Warranty
West System 105-B 9.6/10 .98 gallon 5 to 1 or 3 to 1 Not stated Yes, with 207 hardener 1 year
TotalBoat Clear Epoxy 9.6/10 1.5 gallon 2 to 1 Not stated Yes Not stated
TotalBoat 5:1 Epoxy 9.6/10 1 gallon 5 to 1 20 min slow, 12 min fast No Not stated
J-B Weld Resin Quart 9.5/10 Quart Not stated Not stated Not stated Not stated

We give each product’s specs as its manufacturer rates them; listings read 21 November 2026. Kit size is the resin kit size as listed, and mix ratio is parts of resin to parts of hardener.

What the listings tell you, and what they leave out

Four resins were compared for this guide. Only one states a warranty term, the West System 105-B at 1 year, and none states a safety certification. Pot life is stated only for the TotalBoat 5:1 kit, at 20 minutes with slow hardener and 12 minutes with fast hardener at 75°F. Mix ratios are stated for three of the four: 5 to 1 for the TotalBoat 5:1 kit, 2 to 1 for the TotalBoat High Performance kit, and 5 to 1 or 3 to 1 for the West System resin depending on the hardener. The J-B Weld resin states no mix ratio.

Clear coating is the sharpest split: the TotalBoat High Performance kit is stated as ideal for clear coating, the West System resin gives a blush-free clear finish with the 207 hardener, and the TotalBoat 5:1 kit is not intended for clear coating.

Buying guide: choosing the best fiberglass epoxy resin

Mix ratio

The mix ratio decides how the resin is measured. The TotalBoat 5:1 kit mixes 5 parts resin to 1 part hardener, the TotalBoat High Performance kit mixes 2 parts resin to 1 part hardener, and the West System resin mixes 5 to 1 with 205 or 206 hardener and 3 to 1 with 207 or 209 hardener. The J-B Weld resin states no mix ratio.

Pot life and working time

Pot life is the working window after mixing. The TotalBoat 5:1 kit states 20 minutes with slow hardener and 12 minutes with fast hardener at 75°F. The TotalBoat High Performance kit offers slow, medium or fast hardener, with slow giving the longest working and setting times, and the West System resin offers 209 Extra Slow Hardener for extended working time in warm or humid conditions. The J-B Weld resin states a 2 hour dry time instead of a pot life. For a first pour, see best epoxy resin for beginners.

Clear coating or structural work

Clear coating and structural work call for different resins. The TotalBoat High Performance kit is stated as ideal for clear coating, with a clear, non-blushing hardener and no washdowns between coats. The West System resin gives a blush-free, exceptionally clear finish with 207 Extra Clear Hardener at a 3 to 1 ratio. The TotalBoat 5:1 kit is not intended for clear coating, and the J-B Weld resin is framed as a repair resin for holes and cracks.

What it bonds to

Check the bond list against the job. The TotalBoat 5:1 kit bonds wood, steel, lead, etched aluminum, fiberglass, carbon fiber and other composites. The J-B Weld resin repairs fiberglass, rigid plastics, metal and concrete. The West System resin builds bonds and coatings on wood or fiberglass, and the TotalBoat High Performance kit is stated for woodworking, boat building, laminating and repair projects. If the job is a bar top rather than a boat, see the best bar top epoxy resin.

Kit size and what is in the box

Kit size runs from a quart to 1.5 gallons here. The J-B Weld resin is a quart, the West System resin is a .98 gallon base, the TotalBoat 5:1 kit is a gallon, and the TotalBoat High Performance kit is 1.5 gallons. Both TotalBoat kits include pumps: color-coded pumps and mixing supplies with the 5:1 kit, and calibrated pumps with the High Performance kit. The West System resin is sold as the resin base, to be mixed with one of four WEST SYSTEM hardeners. For mixing, see the best resin mixer.

Project Match

  • Boat building and laminating: the TotalBoat 5:1 kit and the TotalBoat High Performance kit, both stated for boat building, fiberglass repairs and laminating.
  • Clear coating: the TotalBoat High Performance kit, stated as ideal for clear coating, and the West System 105-B with 207 Extra Clear Hardener for a blush-free clear finish.
  • Small repairs on pools, tubs and showers: the J-B Weld resin, stated for repairs on holes and cracks in pools, boats, tubs and showers.
  • Wood bonding and coating: the West System 105-B and the TotalBoat 5:1 kit, both stated for wood.
  • Fiberglass cloth layup: the TotalBoat 5:1 kit, stated for wetting out fiberglass cloth, and the West System 105-B, stated to wet out fiberglass.

How the scores add up

Each resin is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing. None of the four resins states a safety certification, so all four score zero on safety, and only the West System resin states a warranty term.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
West System 105-B 9.6 29 21 20 n/a 2
TotalBoat Clear Epoxy 9.6 32 21 21 n/a 0
TotalBoat 5:1 Epoxy 9.6 30 21 21 n/a 0
J-B Weld Resin Quart 9.5 26 20 20 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.

FAQ: lasers and CNC

Which resin here is made for clear coating?

The TotalBoat High Performance kit, which the maker describes as ideal for clear coating with a clear, non-blushing hardener. The West System resin also gives a blush-free clear finish with 207 Extra Clear Hardener at a 3 to 1 ratio, while the TotalBoat 5:1 kit is not intended for clear coating.

What mix ratios do these resins use?

The TotalBoat 5:1 kit mixes 5 parts resin to 1 part hardener, and the TotalBoat High Performance kit mixes 2 parts resin to 1 part hardener. The West System resin mixes 5 to 1 with 205 or 206 hardener and 3 to 1 with 207 or 209 hardener. The J-B Weld resin states no mix ratio.

How long is the pot life of the TotalBoat 5:1 resin?

At 75°F, pot life is 20 minutes with slow hardener and 12 minutes with fast hardener.

Which resin states a warranty?

Only the West System 105-B, with a 1 year warranty stated. The TotalBoat 5:1 kit, the TotalBoat High Performance kit and the J-B Weld resin state no warranty term.

Can the J-B Weld resin be used with fiberglass cloth?

Yes. The maker states to use the resin with fiberglass cloth or mat for reinforcement strength on repairs to holes or gaps.

More laser and CNC guides

Related: the resin art hub, resin and craft supplies, and how to use epoxy resin. Also see epoxy resin kits for beginners. Also see best non toxic epoxy resin. Also see epoxy vs acrylic resin. Also see how to remove epoxy resin. Also see best epoxy resin for tumblers. Also see best resin for jewelry making.

More buying guides

Resin Art ·

Best Crystal Clear Epoxy Resin (2026)

Five crystal clear epoxy resin kits from 32 oz to 2 gallons, compared by mix ratio, work time, hardening time, heat resistance and warranty.