Best Epoxy Resin for Tumblers (2026)
Maker-stated epoxy resins for tumbler coating, compared by size, mix ratio, working time and finish.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBond Craftor 32oz9.7/10View on Amazon - 2
Best Large BatchLET’S RESIN 1 Gallon9.6/10View on Amazon - 3
Best Long Working TimeJANCHUN 16oz9.5/10View on Amazon
A coated tumbler has to look smooth at the market table and stay glossy in daily use, so the resin you choose shapes the finish you can sell. This guide compares epoxy options for tumbler work and names the best epoxy resin for tumblers from what each maker states about mix ratio, working time and finish.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Bond Craftor 32oz: Stated tumbler epoxy with 30 minutes working time, 10 hours set time and 12 Months warranty. Check price on Amazon
- Best Large Batch LET’S RESIN 1 Gallon: 1 Gallon stated for tumblers with heat up to 176°F and 20 minutes working time. Check price on Amazon
- Best Long Working Time JANCHUN 16oz: 45 minutes working time stated in a 16oz kit stated for tumblers. Check price on Amazon
Machines on the list

Bond Craftor Tumbler Epoxy Resin 32oz
Tumbler epoxy resin stated for glitter mug coating, with 1:1 mix, 30 minutes working time and high gloss finish.
Pros
- Maker states tumbler epoxy for glitter mug coating
- Self leveling with no fish eyes stated
- 30 minutes working time and 10 hours set time stated
- 12 Months warranty term stated
Cons
- 32oz size suits small batches, not large repeat runs
- 30 minutes working time is less than 45 minutes on JANCHUN 16oz
- No cups, sticks or gloves stated as included
- Transparent color as stated, for clear coating work

LET'S RESIN EPOXY RESIN 1 Gallon High Viscosity
High viscosity table top resin stated for tumblers, with 1:1 mix, 20 minutes working time and heat up to 176°F stated.
Pros
- Maker states epoxy for tumblers with self leveling
- 64oz resin + 64oz hardener for repeat coating work
- Heat up to 176°F stated after setting
- 2 scrapers, 2 sponges, 4 cups and 2 pairs of gloves stated
Cons
- 20 minutes working time leaves less coating time per batch
- High viscosity at 14208cps as stated, thick handling
- 1 Gallon size is large for small trial batches
- Tumbler itself is not included as stated

JANCHUN Epoxy Resin Kit 16oz
16oz resin kit stated for tumblers, with 1:1 mix, 45 minutes working time and self-leveling finish.
Pros
- 45 minutes working time stated for coating batches
- Maker states tumblers among uses, with self-leveling
- 10 plastic cups, 4 mixing sticks, 2 droppers and 2 pairs of gloves stated
- Maker states anti-UV formula for clear finish
Cons
- 16oz size suits small batches, not large repeat runs
- No warranty term is stated
- Clear color as stated, for clear coating work
- 45 minutes working time still needs ready batches

64OZ Epoxy Resin Kit, Clear Resin No Yellowing No
64OZ casting and coating resin kit with 1:1 mix, stated for coasters, countertops and molds.
Pros
- 32 oz resin + 32 oz hardener stated, 64OZ total as labeled
- 2 pump heads, 5 measuring cups, 10 sticks, 4 aprons, 2 tablecloths and 2 pairs of gloves stated
- Self-leveling and self defoaming stated by maker
- 8 hours drying and 24 hours set time stated
Cons
- Tumbler use is Not stated
- No warranty term is stated
- 64OZ size is large for small trial batches
- Clear color as stated, for clear coating work

LET'S RESIN 34oz Crystal Clear Epoxy Resin
34oz casting resin kit for jewelry, coasters and molds, with maker stating not suitable for tumbler.
Pros
- 17oz resin + 17oz hardener stated, 34oz total as labeled
- 6x5g mica powders, 4x8oz measuring cups, 10 disposable cups and 4 mixing sticks stated
- Maker states low viscosity for casting work
- 1:1 mix with 24 hours set time stated
Cons
- Maker states not suitable for tumbler
- 24 hours set time needs overnight planning
- Cold weather warming step stated at 122°F (50°C) for 5-10 minutes
- 34oz size is less than 64OZ and 1 Gallon picks
Other machines to compare
Promise Epoxy Fast Cure Resin 1 GalCheck price on Amazon
Bellelfin 14 Colors Resin Chunky Glitter Flakes IrregularCheck price on Amazon
Sakolla 5 Pieces Christmas Silicone Resin Molds 3D SnowflakeCheck price on Amazon
YIEHO 300g UV Resin Glue Crystal ClearCheck price on Amazon
HeyClear 3D Skull Resin Molds SiliconeCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Mix ratio | Working time | Set time | Stated for tumblers | Warranty |
|---|---|---|---|---|---|---|---|
| Bond Craftor 32oz | 9.7/10 | 32oz | 1:1 by volume | 30 minutes | 10 hours | Yes | 12 Months |
| LET’S RESIN 1 Gallon | 9.6/10 | 1 Gallon | 1:1 | 20 minutes at 70-80°F | 24 hours | Yes | Not stated |
| JANCHUN 16oz | 9.5/10 | 16 fl oz | 1:1 | 45 minutes | Not stated | Yes | Not stated |
| KISREL 64OZ | 9.4/10 | 64 OZ | 1:1 | Not stated | 24 hours | Not stated | Not stated |
| LET’S RESIN 34oz | 9.2/10 | 34 Fl Oz | 1:1 | Not stated | 24 hours | Maker states not suitable | Not stated |
Specifications are manufacturer rated, as published by each maker and collected 19 November 2026.
Buying guide: best epoxy resin for tumblers
Tumbler coating needs a resin that levels on a curved surface, holds gloss, and gives enough working time to coat without rushing. The picks here differ most on stated tumbler use, size, working time and set time, so match those figures to batch size and schedule before you choose.
Mix ratio and working time
Every pick here states a 1:1 mix ratio by volume, so measuring stays simple across the group. Working time differs: JANCHUN 16oz states 45 minutes, Bond Craftor 32oz states 30 minutes, and LET’S RESIN 1 Gallon states 20 minutes at 70-80°F. Longer working time helps when coating in batches, while shorter working time needs a smaller batch ready to coat.
Size for tumbler batches
Size ranges from 16oz on JANCHUN 16oz to 1 Gallon on LET’S RESIN 1 Gallon, with 32oz, 34oz and 64OZ options between. Larger sizes suit repeat coating work, while smaller sizes suit trial batches and storage limits. Check total volume as stated: KISREL 64OZ states 32 oz resin + 32 oz hardener, and LET’S RESIN 34oz states 17oz resin + 17oz hardener.
Finish, heat and yellowing
Makers state finish claims in different words. Bond Craftor 32oz states self leveling, no fish eyes and high gloss. LET’S RESIN 1 Gallon states self leveling, self degassing and heat up to 176°F after setting, plus resistance to yellowing from UV exposure. JANCHUN 16oz states anti-UV formula and self-leveling. Treat heat and yellowing lines as maker claims for the stated resin, and keep each claim with the pick that states it.
What is in the box
Included extras differ. JANCHUN 16oz states cups, mixing sticks, droppers and gloves. KISREL 64OZ states pump heads, measuring cups, sticks, aprons, tablecloths and gloves. LET’S RESIN 34oz states mica powders, measuring cups and mixing sticks. LET’S RESIN 1 Gallon states scrapers, sponges, cups and gloves.
Work with ventilation, wear gloves, and follow maker directions for mix ratio and set time. Keep resin work away from food surfaces, and let coated pieces set fully before handling or packing for sale.
Project Match
Project fit below uses only stated uses. Where a maker does not state a use, the line says Not stated.
- Tumbler coating: Bond Craftor 32oz, LET’S RESIN 1 Gallon and JANCHUN 16oz state tumbler use. KISREL 64OZ: Not stated. LET’S RESIN 34oz: maker states not suitable for tumbler.
- Table top and countertop coating: LET’S RESIN 1 Gallon and JANCHUN 16oz state table top use. KISREL 64OZ states desktop coating. Bond Craftor 32oz and LET’S RESIN 34oz: Not stated for table top coating.
- Jewelry, coasters and molds: LET’S RESIN 34oz states jewelry, coasters and silicone molds. JANCHUN 16oz states jewelry and coasters. KISREL 64OZ states jewelry making, coasters and molds. LET’S RESIN 1 Gallon states jewelry. Bond Craftor 32oz: Not stated for jewelry.
- Glitter mug coating: Bond Craftor 32oz states glitter mug coating. Others: Not stated.
How the scores add up
Each resin is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the maker does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bond Craftor 32oz | 9.7 | 30 | 21 | 21 | n/a | 4 |
| LET’S RESIN 1 Gallon | 9.6 | 29 | 21 | 22 | n/a | 0 |
| JANCHUN 16oz | 9.5 | 28 | 20 | 19 | n/a | 0 |
| KISREL 64OZ | 9.4 | 21 | 20 | 21 | n/a | 0 |
| LET’S RESIN 34oz | 9.2 | 9 | 20 | 19 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
Which pick states tumbler use most directly?
Bond Craftor 32oz is sold as tumbler epoxy resin for glitter mug coating. LET’S RESIN 1 Gallon states epoxy for tumblers, and JANCHUN 16oz states tumblers among stated uses. KISREL 64OZ does not state tumbler use, and LET’S RESIN 34oz states not suitable for tumbler.
How much working time do the picks state?
JANCHUN 16oz states 45 minutes. Bond Craftor 32oz states 30 minutes. LET’S RESIN 1 Gallon states 20 minutes at 70-80°F. Working time is Not stated for KISREL 64OZ and LET’S RESIN 34oz.
What set times are stated?
Bond Craftor 32oz states 10 hours. LET’S RESIN 1 Gallon, KISREL 64OZ and LET’S RESIN 34oz state 24 hours. Set time is Not stated for JANCHUN 16oz.
Which pick states a warranty term?
Bond Craftor 32oz states 12 Months. Check warranty terms before ordering for batch work.
Related: epoxy vs UV resin for tumblers, best bar top epoxy resin, best laser engraver for tumblers and best laser engraver for cups. Also see the engraving materials hub.




