Best Bar Top Epoxy Resin (2026): 5 Picks for Bar Tops
5 table top epoxy resin kits for bar tops and countertops, compared by kit size, coverage, pour depth, hardening time and food-contact notes.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPromise Epoxy 2 Gallon9.6/10View on Amazon - 2
Best for Large Bar TopsTotalBoat 2 Gallon Kit9.6/10View on Amazon - 3
Best for BeginnersFUHITIM 2 Gallon Kit9.5/10View on Amazon - 4
Best Fast HardeningTotalBoat 1 Gallon Kit9.6/10View on Amazon
A bar top earns its finish the hard way, with glasses set down, plates slid across, and spills wiped up night after night. A thin coat that scratches or clouds turns a good-looking bar into a tired surface, so the resin under that shine matters as much as the wood under it. This guide compares the best bar top epoxy resin kits for bar tops, counters and river tables, using the kit sizes, coverage, pour depth and hardening times each maker states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Promise Epoxy 2 Gallon: A 2 gallon kit with a 1:1 mix ratio and a food-contact compliance statement for hardened surfaces. Check price on Amazon
- Best for Large Bar Tops TotalBoat 2 Gallon Kit: Covers 25.4 sq ft at 1/8 inch thick, with a 1/4 inch pour depth per layer. Check price on Amazon
- Best for Beginners FUHITIM 2 Gallon Kit: A 45 minute working time, 2 pump heads in the box and a defoamer that releases trapped bubbles. Check price on Amazon
- Best Fast Hardening TotalBoat 1 Gallon Kit: Full hardening in 16-20 hours from a 1 gallon kit that covers 12.8 sq ft at 1/8 inch thick. Check price on Amazon
Machines on the list

Promise Epoxy Table Top Epoxy Resin Kit 2 Gallon
A 2 gallon table top epoxy kit with a 1:1 mix ratio, a self-leveling crystal-clear finish and a food-contact compliance statement for hardened surfaces.
Pros
- 1:1 mix ratio takes the guesswork out of measuring
- Hardened resin complies with 21 CFR 175.300 for qualifying food-contact surfaces
- Self-leveling formula with a crystal-clear, high-gloss finish
- American made, from a maker with over 40 years of experience
Cons
- Not intended for cutting surfaces, cookware, or direct exposure to high heat
- Sold as a 2 gallon kit only, so a small pour leaves resin to store
- Food-contact compliance is not a blanket FDA certification, per the maker note
- At 6.0 pounds, heavier than the FUHITIM kit at 4.0 pounds

Superclear Table Top Epoxy Resin 2 Gallon Kit
A 2 gallon table top epoxy kit with a 1:1 mix ratio, UV stabilizers and a food-safe hardened surface, made in the USA.
Pros
- 1:1 mix ratio for easy measuring
- UV stabilizers help the hardened surface resist yellowing
- Fully hardened surface is food safe for bar tops and serving boards
- Made in the USA by a maker with over 60 years of resin manufacturing expertise
Cons
- At 18.5 pounds, the heaviest kit in this guide
- No warranty term is stated
- Sold as a 2 gallon kit only
- Food-safe claim applies only once the surface is fully hardened

TotalBoat Table Top Epoxy Resin
A 2 gallon table top epoxy kit with a 1:1 mix ratio, coverage of 25.4 sq ft at 1/8 inch thick and a full hardening in 5-7 days.
Pros
- Covers 25.4 sq ft at 1/8 inch thick, the widest coverage stated here
- 1:1 mix ratio with a self-leveling, high-gloss finish
- Pours up to 1/4 inch per layer and up to 1 inch in a mold
- BPA-free formula, safe for food-surface contact on serving dishes and furniture
Cons
- Full hardening takes 5-7 days, the longest stated hardening here
- Mold pours are capped at 6 fl. oz.
- Needs a 65-80°F workspace for application
- Layers need 3 hours between pours

TotalBoat Table Top Epoxy Resin
A 1 gallon table top epoxy kit with a 1:1 mix ratio, coverage of 12.8 sq ft at 1/8 inch thick and a full hardening in 16-20 hours.
Pros
- Full hardening in 16-20 hours, the fastest stated hardening here
- Covers 12.8 sq ft at 1/8 inch thick from a 1 gallon kit
- 1:1 mix ratio with a self-leveling, high-gloss finish
- BPA-free formula, UV resistant and waterproof
Cons
- 1 gallon kit covers 12.8 sq ft, the smallest coverage stated here
- Deep pours need layers at 1/4 inch each
- Apply within 40 minutes of mixing
- Store at 60-90°F

FUHITIM Epoxy Resin 2 Gallon,Crystal Clear Epoxy
A 2 gallon crystal-clear epoxy kit with a 1:1 mix ratio, a 45 minute working time and 2 pump heads in the box.
Pros
- 45 minute working time for mixing colors and pouring
- 2 pump heads in the box for easy dispensing
- Defoamer releases trapped bubbles for a clear coat
- Self-leveling formula with a high-gloss, glass-like finish
Cons
- Each layer should not exceed 1/4 inch
- Cold-weather use needs the resin and hardener preheated
- The maker advises a small trial pour before work, so an early pour takes extra time
- No warranty term is stated
Other machines to compare
YIEHO 300g UV Resin Glue Crystal ClearCheck price on Amazon
ArtResin Epoxy ResinCheck price on Amazon
LET'S RESIN EPOXY RESIN 1 Gallon High Viscosity Resin forCheck price on Amazon
Specs compared
| Resin | HQ Score | Kit size | Mix ratio | Coverage | Pour depth | Full hardening | Food-contact note |
|---|---|---|---|---|---|---|---|
| Promise Epoxy 2 Gallon | 9.6/10 | 2 Gallon | 1:1 | Not stated | Not stated | Not stated | Complies with 21 CFR 175.300 |
| Superclear 2 Gallon | 9.6/10 | 2 Gallon Kit | 1:1 | Not stated | Not stated | Not stated | Food safe after hardening |
| TotalBoat 2 Gallon Kit | 9.6/10 | 2 Gallon Kit | 1:1 | 25.4 sq ft at 1/8 inch thick | 1/4 inch per layer | 5-7 days | BPA-free, food-surface contact |
| TotalBoat 1 Gallon Kit | 9.6/10 | 1-Gallon Kit | 1:1 | 12.8 sq ft at 1/8 inch thick | 1/4 inch per layer | 16-20 hours | BPA-free |
| FUHITIM 2 Gallon Kit | 9.5/10 | 2 Gallon | 1:1 | Not stated | Not stated | 8-24 hours | Not stated |
Specifications are manufacturer rated, as published by each maker and collected 14 November 2026. Kit size is the size of the kit each maker states. Coverage is at 1/8 inch thick where the maker states it.
What the makers state, and what they leave out
5 table top epoxy resin kits were compared for this guide. 2 of the 5 state a coverage figure at 1/8 inch thick, both TotalBoat kits. 2 of the 5 state a working time after mixing. 1 states a food-contact regulation number. None of the 5 state a warranty term.
Pour depth is the clearest split. The TotalBoat kits state a pour of up to 1/4 inch deep per layer and up to 1 inch in a mold, while the FUHITIM kit states a layer limit of 1/4 inch. Hardening times vary just as much: the TotalBoat 1 gallon kit reaches full hardening in 16-20 hours, the 2 gallon kit in 5-7 days, and the FUHITIM kit solidifies within 8-24 hours. Working time after mixing is 40 minutes for the TotalBoat kits and 45 minutes for the FUHITIM kit.
How to choose the best bar top epoxy resin
Kit size and coverage
Kit size decides how much top a kit can cover in a pour. The TotalBoat 1 gallon kit covers 12.8 sq ft at 1/8 inch thick, and the TotalBoat 2 gallon kit covers 25.4 sq ft at 1/8 inch thick. The other kits in this guide state no coverage figure, so match the kit size to the size of the top and plan on layers for a deep pour.
Pour depth and layers
Pour up to 1/4 inch deep per layer with the TotalBoat kits, and up to 1 inch in a mold, with mold pours capped at 6 fl. oz. for the 2 gallon kit. The FUHITIM kit sets the same 1/4 inch limit per layer. A deep pour needs layers, so leave time between pours: add layers after 4-8 hours with the TotalBoat 1 gallon kit and after 3 hours with the 2 gallon kit.
Working time and hardening times
Working time is the window for mixing, pouring and smoothing before the resin starts to set. TotalBoat states 40 minutes of working time after mixing, and FUHITIM states a 45 minute working time. Full hardening runs from 16-20 hours for the TotalBoat 1 gallon kit to 5-7 days for the 2 gallon kit, while the FUHITIM kit solidifies within 8-24 hours. Apply the TotalBoat kits in 70-80°F spaces for the 1 gallon kit and 65-80°F spaces for the 2 gallon kit, and store the kits at 60-90°F.
Food-contact surfaces
A bar top holds glasses and plates, so a food-contact statement matters. Promise Epoxy states its hardened resin complies with 21 CFR 175.300 for qualifying food-contact surfaces, and notes the compliance is not a blanket FDA certification. Superclear states its fully hardened surface is food safe. TotalBoat states a BPA-free formula that is safe for food-surface contact on serving dishes and furniture. Promise Epoxy also notes its resin is not intended for cutting surfaces, cookware, or direct exposure to high heat.
What epoxy resin will not do
Epoxy resin is a coating, not a cutting surface, and Promise Epoxy states its resin is not intended for cutting surfaces. Heat is the other limit: Promise Epoxy rules out direct exposure to high heat, and a hardened coat that faces a hot pan or a stove edge needs a trivet or a mat under it. A deep pour also needs patience, since the kits that state a pour depth pour in layers at 1/4 inch each.
Project Match
- Bar tops and countertops. All 5 kits suit bar tops and countertops. The TotalBoat 2 gallon kit covers 25.4 sq ft at 1/8 inch thick for a large top, while the 1 gallon kit covers 12.8 sq ft at 1/8 inch thick.
- River tables and wood art. The TotalBoat kits name river tables and woodworking among their uses.
- Serving boards and food-contact surfaces. Promise Epoxy and Superclear state food-contact notes for hardened surfaces, and TotalBoat states a BPA-free formula for food-surface contact.
- Coasters, jewelry and small molds. The TotalBoat kits pour up to 1 inch in a mold, and the FUHITIM kit suits jewelry, coasters and molds.
- Tumblers. The TotalBoat kits name tumblers among their uses.
How the scores add up
Each resin is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the maker does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Promise Epoxy 2 Gallon | 9.6 | 30 | 21 | 21 | 8 | 0 |
| Superclear 2 Gallon | 9.6 | 30 | 22 | 19 | 7 | 0 |
| TotalBoat 2 Gallon Kit | 9.6 | 30 | 21 | 20 | 7 | 0 |
| TotalBoat 1 Gallon Kit | 9.6 | 29 | 21 | 19 | 7 | 0 |
| FUHITIM 2 Gallon Kit | 9.5 | 28 | 19 | 20 | 5 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
What is the best epoxy resin brand?
For a bar top, the Promise Epoxy kit leads this guide on its food-contact compliance statement and its 2 gallon size, with the TotalBoat 2 gallon kit close behind on coverage and hardening detail. The right brand depends on the job: a large top favors the TotalBoat 2 gallon kit at 25.4 sq ft of coverage, while a serving board favors the Promise Epoxy kit.
How thick can you pour epoxy resin?
Pour up to 1/4 inch deep per layer with the TotalBoat kits, and up to 1 inch in a mold. The FUHITIM kit sets the same 1/4 inch limit per layer. For a deeper pour, add layers after 4-8 hours with the TotalBoat 1 gallon kit and after 3 hours with the 2 gallon kit.
Is epoxy resin dangerous?
Hardened epoxy resin for a bar top is a hard, waterproof finish, and the makers here state food-contact notes for hardened surfaces: Promise Epoxy cites 21 CFR 175.300, Superclear states food safe after hardening, and TotalBoat states a BPA-free formula. Follow the maker directions for mixing and curing, and keep the resin off cutting surfaces, cookware and high heat, as Promise Epoxy directs.
How to paint over epoxy resin?
Wait for full hardening before painting over a coat: 16-20 hours for the TotalBoat 1 gallon kit and 5-7 days for the 2 gallon kit. A hardened coat takes paint once the surface is hard and dry, so check the coat is fully hardened before starting.
Where to purchase epoxy resin?
Table top epoxy resin kits are sold in 1 gallon and 2 gallon sizes from resin makers, in kits that pair resin and hardener at a 1:1 mix ratio. Pick the kit size by the size of the top, and check the coverage, pour depth and hardening time the maker states before ordering.
Related: the resin art hub, our best UV resin picks, and hard vs flexible UV resin. Also see our best resin kit for beginners. Also see our non toxic epoxy resin. Also see our best non yellowing uv resin. Also see our best resin mixer.




