Best DTF Transfer Film Sheets A4 and A3 (2026): 5 Picks for T-Shirts and Crafts
Five DTF transfer film sheets in A4 and A3, compared by sheet count, peel type, press settings and warranty, using only what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCenDale DTF Film A39.7/10View on Amazon - 2
Best A4 PackPrintium DTF Film A49.6/10View on Amazon - 3
Best A3 PackWelacer DTF Film A39.6/10View on Amazon - 4
Best Small BatchA-SUB DTF Film A49.5/10View on Amazon
Custom shirts start with a design that has to survive the wash, the stretch and the wearer. A maker prints the artwork onto a coated PET sheet, adds adhesive powder and presses the design onto fabric, and the sheet in the middle of that workflow decides how clean the print looks and how well it holds. This guide compares the best dtf transfer film sheets a4 and a3 for that workflow, using only what each listing states about size, sheet count, peel type, press settings and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you.
Quick picks
- Best Overall CenDale DTF Film A3: An A3 film with a 5-layer coating, stated press settings and an 18 month warranty. Check price on Amazon
- Best A4 Pack Printium DTF Film A4: A 100-sheet A4 pack with hot and cold peel and a clear DTF-only statement. Check price on Amazon
- Best A3 Pack Welacer DTF Film A3: A 100-sheet A3 pack with a thick double-sided coating and hot and cold peel. Check price on Amazon
- Best Small Batch A-SUB DTF Film A4: A 30-sheet A4 pack with a 90 day warranty, sized for small orders. Check price on Amazon
Machines on the list

CenDale DTF Transfer Film - A3 (11.7" x 16.5")
An A3 DTF film in a 60-sheet pack with a 5-layer coating, a stated press window of 266 to 320 °F and 6 to 10 seconds, and an 18 month warranty.
Pros
- A3 sheets at 11.7 x 16.5 in, 297 x 420 mm, in a 60-sheet pack
- 5-layer coating for ink absorption, with a glossy anti-slip reverse side
- Stated press settings: 266 to 320 °F for 6 to 10 seconds
- 18 month warranty and a maker claim of 20 years in DTF film production
Cons
- 60 sheets is the smallest A3 pack here
- No peel type is stated

Printium DTF Transfer Film Sheets A4
An A4 DTF film in a 100-sheet pack with double matte anti-static PET, hot and cold peel, and a clear statement that it is DTF only, not for sublimation.
Pros
- A4 sheets at 8.3 x 11.7 in in a 100-sheet pack
- Hot and cold peel
- Double matte anti-static PET
- States plainly that it is DTF only and not for sublimation
Cons
- No warranty term in the listing
- No press temperature or press time is stated
- DTF powder is required and sold separately
- A4 only, so larger designs need an A3 sheet

DTF Transfer Film A3 100 Sheets,Double-Sided Thick
An A3 DTF film in a 100-sheet pack with a thick double-sided coating and hot and cold peel, for DTF inkjet printers.
Pros
- 100 A3 sheets, the largest A3 pack here
- Thick double-sided coating for even ink coverage
- Hot and cold peel, with cold peel stated as the better result so far
- Names L1800, F2100, ET4700 and XP15000 printers
Cons
- No warranty term in the listing
- No press temperature or press time is stated
- No film thickness is stated

DTF Transfer Film A4(8.3" x 11.7")
An A4 DTF film in a 100-sheet pack with a double-layer coating applied 10 times and a waterproof print side.
Pros
- A4 sheets at 8.3 x 11.7 in in a 100-sheet pack
- Double-layer coating applied 10 times, per the listing
- Waterproof print side with a stated soft feel after washing
- Supports hot tearing and cold tearing after pressing
Cons
- No warranty term in the listing
- No press temperature or press time is stated
- No film thickness is stated
- No printer models are named, only all DTF printers

A-SUB DTF Transfer Film A4 30 Sheets
An A4 DTF film in a 30-sheet pack for small-batch projects, with a 90 day warranty and a stated anti-static double side.
Pros
- A 30-sheet pack sized for small-batch projects
- Anti-static double side with no powder residue after shaking, per the listing
- A 90 day warranty from the date of purchase
- Transfers are stated to withstand hundreds of washings with no bleed and a soft feel
Cons
- 30 sheets is the smallest pack here
- No press temperature or press time is stated
- DTF transfer powder is required
Other machines to compare
Koala DTF Transfer Film 8.5x11 InCheck price on Amazon
White PTFE Sheet for Heat PressCheck price on Amazon
TransOurDream PTFE Teflon SheetsCheck price on Amazon
TransOurDream 3 PTFE Teflon SheetsCheck price on Amazon
HTVRONT Heat Transfer PaperCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Sheets | Peel | Press settings | Warranty |
|---|---|---|---|---|---|---|
| CenDale DTF Film A3 | 9.7/10 | 11.7 x 16.5 in (A3) | 60 | Not stated | 266 to 320 °F, 6 to 10 seconds | 18 months |
| Printium DTF Film A4 | 9.6/10 | 8.3 x 11.7 in (A4) | 100 | Hot and cold | Not stated | Not stated |
| Welacer DTF Film A3 | 9.6/10 | A3 | 100 | Hot and cold | Not stated | Not stated |
| Hem Dgpsy DTF Film A4 | 9.6/10 | 8.3 x 11.7 in (A4) | 100 | Hot and cold | Not stated | Not stated |
| A-SUB DTF Film A4 | 9.5/10 | A4 | 30 | Not stated | Not stated | 90 days |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Size is the sheet size in the listing title, and press settings are shown only where a listing states them.
How the picks were scored
Each film is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CenDale DTF Film A3 | 9.7 | 30 | 21 | 20 | n/a | 3 |
| Printium DTF Film A4 | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Welacer DTF Film A3 | 9.6 | 29 | 20 | 21 | n/a | 0 |
| Hem Dgpsy DTF Film A4 | 9.6 | 28 | 20 | 20 | n/a | 0 |
| A-SUB DTF Film A4 | 9.5 | 27 | 19 | 16 | n/a | 1 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
What the listings tell you, and what they leave out
Five listings were read for this guide. Two state a warranty term, and only one states a press temperature and a press time. Three state hot and cold peel. Two list a size in the spec table that does not match the size in the title, and one prints a width in the dimensions bullet that does not match its own title.
The gaps matter because film is a consumable: a sheet that feeds badly or presses at an unknown setting wastes ink, powder and blanks. Where a listing leaves a setting out, the notes below say so.
Choosing the best dtf transfer film sheets a4 and a3
A4 or A3
A4 sheets at 8.3 x 11.7 in suit chest prints, pocket designs and small gift runs. A3 sheets at 11.7 x 16.5 in suit larger chest prints and full-front designs. Two picks here are A3 and three are A4.
Hot peel or cold peel
Three picks state hot and cold peel: Welacer, Hem Dgpsy and Printium. Welacer states that the cold peel result is better so far, and Printium states that peeling warm suits faster production and peeling cool suits controlled release. CenDale and A-SUB state no peel type, so the peel step for those two is a question for the seller.
What else the workflow needs
Film alone does not make a transfer: Printium states that hot-melt adhesive DTF powder is required and sold separately, and that film alone will not transfer properly. CenDale states that a successful transfer needs DTF ink, DTF powder and DTF film prepared. A-SUB states that DTF transfer powder must be used. Check the printer list: Welacer names L1800, F2100, ET4700 and XP15000, while Printium names ET8550, L1800, XP15000, XP600, R1390, I3200, TX800 and 5113.
Press settings
Only CenDale states a press window: 266 to 320 °F for 6 to 10 seconds. The other four listings state no temperature and no time, so the press step for those films follows the powder and press maker guidance rather than the film listing. Do not guess a setting from another film: the stated window belongs to the CenDale listing alone.
DTF printing or the sublimation hack
Printium states that its sheets are designed exclusively for DTF printing and are not compatible with sublimation printers, sublimation ink or sublimation printing. CenDale, Welacer and A-SUB state that the sheets also work with sublimation printers for the DTF sublimation hack, with a limit the listings repeat: the hack suits white or very light fabrics, because sublimation ink has no white ink for dark garments. Hem Dgpsy states compatibility with all DTF printers and says nothing about sublimation.
DTF work means a hot press and a heated powder step. Work in a ventilated space, keep hands clear of the press platen, and let pressed sheets cool before handling. Follow the press settings the film listing states.
Project Match
Match the sheet to the project, using only what each listing states about size, materials and pack size.
- T-shirts and larger chest prints in A3: CenDale DTF Film A3 and Welacer DTF Film A3.
- Small gift runs, team shirts and graduation souvenirs in A4: Hem Dgpsy DTF Film A4 and Printium DTF Film A4.
- Small-batch orders: A-SUB DTF Film A4, in a 30-sheet pack.
- Hoodies, tote bags and caps: Printium DTF Film A4 and Welacer DTF Film A3, which name those blanks in the listing.
- Dark garments: any of the five, with a printer equipped with white ink, as the CenDale and Welacer listings state.
FAQ: lasers and CNC
Are DTF transfers good?
DTF transfers suit full-color designs on light and dark fabrics, including cotton, polyester, blends, denim and canvas. CenDale describes brilliant color-rich transfers with excellent washability and resistance to stretching, and Printium describes bright colors, crisp edges, a soft feel and strong adhesion. CenDale notes that paper settings, ink, transfer time and temperature all affect the color outcome.
Are DTF transfers durable?
The listings describe durable results in the maker wording. A-SUB states that transfers withstand hundreds of washings with no bleed and a soft feel. CenDale states excellent washability and resistance to stretching. Printium states crack-free, peel-free and fade-resistant results through repeated washing. Hem Dgpsy states washable, soft feel and durable prints. No listing gives a wash count.
How to press a DTF transfer?
Print the design on the film, apply hot-melt adhesive powder, then heat press the film onto the garment and peel. Only CenDale states a press setting: 266 to 320 °F for 6 to 10 seconds. The other listings state no temperature and no time. Peel warm for faster production or cool for controlled release on the sheets that state hot and cold peel.
How to do DTF transfers at home?
Start with the pieces the listings name: a DTF printer, DTF ink, DTF powder and DTF film. Print the design onto the print side of the film, apply the powder, then heat press the design onto the garment. CenDale notes that the film is double-sided, with the printing side indicated on the packaging. A-SUB adds that no weeding and no PreTreat step are needed, and that the film cuts to the size the project needs.
How are DTF transfers made?
A DTF transfer is made by printing a design onto coated PET film with DTF ink, applying hot-melt adhesive powder to the printed design, and heat pressing the film onto fabric so the design releases onto the garment. The listings describe the same sequence: CenDale lists DTF ink, DTF powder and DTF film as the pieces to prepare, and Printium describes printing onto the film, applying the powder, then heat pressing onto the garment. The film is the carrier in the middle of that sequence.
Related: the craft machines hub, heat presses and sublimation, DTF powder, DTF transfer paper and powder, DTF printer for beginners and heat press for beginners. Also see heat press paper.




