Best Dtf Transfer Film Roll 13 Inch (2026)
Five 13 inch by 328 ft DTF film rolls compared by finish, peel timing, press settings and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLucubret DTF Film Roll9.7/10View on Amazon - 2
Best GlossyGOZYE DTF Film Roll9.6/10View on Amazon - 3
Best for Hot PeelCenDale DTF Film Roll9.6/10View on Amazon - 4
Best MattePrintium DTF Film Roll9.5/10View on Amazon - 5
Best for A3 StudiosGEVANCY DTF Film Roll9.5/10View on Amazon
A custom shirt starts on film: the design prints onto a roll, powder bonds it, and a heat press moves it onto fabric. This guide compares the best dtf transfer film roll 13 inch options for that workflow, looking at finish, peel timing, press settings and what each listing says about warranty, so a maker can pick a roll that fits a DTF printer and a heat press.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Lucubret DTF Film Roll: Instant, hot, warm and cold peel with a stated press setting of 140 to 160 °C for 8 to 12 seconds and a stated 2 year warranty. Check price on Amazon
- Best Glossy GOZYE DTF Film Roll: Double-sided glossy film with a 5 layer coating, stated press settings and a stated 2 year warranty. Check price on Amazon
- Best for Hot Peel CenDale DTF Film Roll: Hot peel right after pressing, a stated film thickness of 0.75 mm and a stated 18 month warranty. Check price on Amazon
- Best Matte Printium DTF Film Roll: Double-sided matte film with anti-static coating and the widest printer compatibility list in this guide. Check price on Amazon
- Best for A3 Studios GEVANCY DTF Film Roll: Double-sided matte film for A3 DTF printers, packed moisture-proof and impact-safe. Check price on Amazon
Machines on the list

DTF Transfer Film Roll 13 Inch x 328 FT
A double-sided matte A3+ roll with instant, hot, warm and cold peel, a 75 μm coating and a stated 2 year warranty.
Pros
- Peels instant, hot, warm or cold, with clean removal within 2 seconds after pressing
- Stated press setting of 140 to 160 °C for 8 to 12 seconds
- 75 μm double-sided coating with anti-static treatment and no pretreatment step
- Lists cotton, polyester, denim, leather, nylon, canvas and blends
Cons
- No film thickness is stated, only the 75 μm coating
- Matte finish gives less color saturation than a glossy film, per the listing
- Needs a DTF printer, DTF inks and hot-melt powder, which are not in the box
- Roll weight is not stated in the listing

GOZYE DTF Transfer Film Roll
A double-sided glossy A3+ roll with a 5 layer coating, hot and cold peel and a stated 2 year warranty.
Pros
- 5 layer coating, 3 coats on the front and 2 coats on the back
- Stated press setting of 266 to 320 °F for 10 to 15 seconds
- Hot and cold peel with no waiting time after pressing
- Tape side marks the print side
Cons
- Glossy effect is only noticeable after printing, per the listing
- No film thickness figure is stated
- No printer compatibility list is stated
- Roll weight is not stated in the listing

CenDale DTF Film Roll 13 inch x 328ft Glossy
A single-sided glossy A3+ roll with hot and cold peel, a stated 0.75 mm thickness and a stated 18 month warranty.
Pros
- Hot peel right after pressing, with cold peel also stated
- Stated film thickness of 0.029 in, 0.75 mm
- Stated press setting of 266 to 320 °F for 10 to 15 seconds
- 5 layer coating for ink absorption, with an anti-slip layer on the glossy reverse
Cons
- Single-sided, so the print side must be identified as the matte side
- Needs a DTF printer, DTF ink and DTF powder, which are not in the box
- No printer compatibility list is stated
- No stated roll weight

Printium DTF Transfer Film Roll
A double-sided matte A3+ roll with instant hot and cold peel, anti-static coating and the widest printer list in this guide.
Pros
- Instant hot and cold peel with no waiting and no residue, per the listing
- Double-sided matte PET with an anti-static surface for jam-free feeding
- Lists I3200, XP600, TX800 and more printheads, plus ET8550, ET8500, XP15000 and L1800
- Lists cotton, polyester, spandex, canvas, nylon, denim and leather for light and dark garments
Cons
- No transfer temperature or press time is stated
- No film thickness or coating thickness is stated
- No warranty term is stated
- No stated coating layer count

GEVANCY DTF Transfer Film Roll 13 inch × 328ft
A double-sided matte A3+ roll for A3 DTF printers, with hot and cold peel and moisture-proof, impact-safe packaging.
Pros
- Double-sided matte film with an anti-slip surface
- Hot and cold peel, with release right after pressing
- Matte finish with scratch-resistant and breathable properties, per the listing
- Moisture-proof, impact-safe packaging for the roll
Cons
- No transfer temperature or press time is stated
- No film thickness or coating thickness is stated
- No warranty term is stated
- Only one side is printable, the side facing outward on the roll
Other machines to compare
InkSonic A3+ DTF Film Roll 13 inch × 328ftCheck price on Amazon
Yamation DTF Transfer Film Glossy: 8.5" x 11"inch 50 SheetsCheck price on Amazon
Yamation DTF Transfer Film Glossy: 8.5" x 11"inch 100 SheetsCheck price on Amazon
100Pcs Sublimation Shrink Wrap SleevesCheck price on Amazon
50Sheets Reactive Foil Transfer Foil Paper 7.9x11.4inch A4Check price on Amazon
Specs compared
| Model | HQ Score | Finish | Peel | Coating | Press settings | Warranty |
|---|---|---|---|---|---|---|
| Lucubret DTF Film Roll | 9.7/10 | Matte | Instant, hot, warm, cold | Double-sided, 75 μm | 140 to 160 °C, 8 to 12 s | 2 years |
| GOZYE DTF Film Roll | 9.6/10 | Glossy | Hot and cold | 5 layers, 3 front, 2 back | 266 to 320 °F, 10 to 15 s | 2 years |
| CenDale DTF Film Roll | 9.6/10 | Glossy | Hot and cold | 5 layers | 266 to 320 °F, 10 to 15 s | 18 months |
| Printium DTF Film Roll | 9.5/10 | Matte | Instant hot and cold | Double-sided | Not stated | Not stated |
| GEVANCY DTF Film Roll | 9.5/10 | Matte | Hot and cold | Double-sided | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Press settings are the temperature and time each listing states.
How the rolls were scored
Each roll is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lucubret DTF Film Roll | 9.7 | 32 | 21 | 22 | 5 | 3 |
| GOZYE DTF Film Roll | 9.6 | 30 | 21 | 21 | 5 | 3 |
| CenDale DTF Film Roll | 9.6 | 30 | 20 | 21 | 5 | 3 |
| Printium DTF Film Roll | 9.5 | 29 | 21 | 20 | 5 | 0 |
| GEVANCY DTF Film Roll | 9.5 | 28 | 21 | 19 | 5 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
What the listings tell you, and what they leave out
All five rolls are 13 inch by 328 ft A3+ film, and all five state hot peel and cold peel. Three of the five state a transfer temperature and a press time: CenDale and GOZYE state 266 to 320 °F for 10 to 15 seconds, and Lucubret states 140 to 160 °C for 8 to 12 seconds. The other two, GEVANCY and Printium, state neither. Two state a thickness figure: CenDale states a film thickness of 0.029 in, 0.75 mm, and Lucubret states a 75 μm coating. Three state a warranty term: CenDale states 18 months, and Lucubret and GOZYE state 2 years.
Glossy and matte split the group: CenDale and GOZYE are glossy, while GEVANCY, Lucubret and Printium are matte. Two rolls state a 5 layer coating: CenDale and GOZYE. Printium lists the widest printer range, while Lucubret names L1800, XP-15000, ET4700, I3200, XP600 and TX800. CenDale states plainly that the film needs a DTF printer, DTF ink and DTF powder, and the other listings name DTF printers and water-based inks in their own words.
Buying guide: the best dtf transfer film roll 13 inch for your printer
Glossy or matte
Glossy film suits vivid color: CenDale states 100% clear printing of the original image colors, and GOZYE states the same 100% color transfer. Matte film suits a softer feel on garments: GEVANCY states a softer, more comfortable feel against the skin, and Lucubret states a soft, flexible hand feel. GEVANCY states plainly that a glossy film may suit a maker who wants maximum color saturation.
Peel timing
Hot peel means the film comes off right after pressing, with no waiting time; CenDale, GOZYE and Printium all state it. Lucubret goes further with instant, hot, warm and cold peel and clean removal within 2 seconds after pressing. Cold peel, by contrast, means waiting before the film comes off, and GEVANCY states the film can be peeled at any time after transfer.
Press temperature and time
Only three listings state a press setting, so start there when comparing. CenDale and GOZYE state 266 to 320 °F for 10 to 15 seconds, while Lucubret states 140 to 160 °C for 8 to 12 seconds. GEVANCY and Printium state no temperature and no time, so the press manual sets those figures for those rolls.
Printer compatibility
Match the roll to the printer before buying. GEVANCY names R1390, M1630, XP600 and L1800 for A3 DTF printers. Lucubret names L1800, XP-15000, ET4700, I3200, XP600 and TX800 for DTF and DTG printers using water-based inks. Printium names the widest list, from I3200, XP600 and TX800 printheads to ET8550, ET8500, XP15000 and L1800 printers, for A3, A3+ and wide-format DTF systems. CenDale and GOZYE name no printer models.
Storage and handling
Know which side prints. GEVANCY ships in moisture-proof, impact-safe packaging, and its double-sided film prints on the side facing outward on the roll only. GOZYE marks the print side with masking tape and an arrow mark, and CenDale notes the matte side is the print side on its single-sided roll. Lucubret states an anti-static coating that keeps powder off the non-design areas, and Printium states an anti-static surface for jam-free feeding.
DTF work adds hot-melt powder and a hot press to the bench. Melt the powder in a ventilated area, keep hands clear of the press plates, and follow the printer and press manuals for temperature and time.
Project Match
- T-shirts and hoodies on cotton or blends: CenDale, Lucubret and Printium list cotton and blends, and GOZYE states any material fabric.
- Dark and light garments: CenDale, Lucubret and Printium state both; GOZYE states all colored garments.
- Hats, bags, sneakers and custom merch: Lucubret lists those uses.
- Large-area transfers: GEVANCY states it performs well on large-area transfers.
- Leather goods and tote bags: Printium lists both, and CenDale lists leather.
FAQ: lasers and CNC
What size DTF transfer roll fits an A3 printer?
All five rolls in this guide are 13 inch wide and 328 ft long, in A3+ format. Cut the film to the size the design needs: CenDale states the roll can be cut to any size, and the width fits A3 DTF printers. Measure the design first, then cut.
How long to press a DTF transfer?
Follow the time the listing states for the roll in hand. CenDale and GOZYE state 10 to 15 seconds, and Lucubret states 8 to 12 seconds. GEVANCY and Printium state no press time, so use the press manual for those rolls.
How to design a DTF transfer?
Print the design on the film, spread hot-melt powder over the printed image, melt the powder, pre-press the shirt, then peel the film. That is the workflow CenDale states, in that order. Print on the matte side for the single-sided CenDale roll, and on the tape side for the GOZYE roll, since each listing marks the print side that way.
What is the best DTF transfer film roll 13 inch?
The Lucubret roll tops this guide: instant, hot, warm and cold peel, a stated press setting of 140 to 160 °C for 8 to 12 seconds, a 75 μm double-sided coating and a stated 2 year warranty. For a glossy finish, the GOZYE roll is the next pick, with a 5 layer coating and the same 2 year warranty. Match the roll to the printer first, since CenDale and GOZYE name no printer models.
Related: the craft machines hub and the heat presses and sublimation hub. Also see best dtf transfer film, dtf printer for beginners, dtf printer vs heat press and dtf printer maintenance.




