Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best DTF Transfer Paper and Powder (2026)

Five DTF transfer paper and powder kits compared by film, powder weight, mesh, heating temperatures and warranty, from what each listing states.

Best DTF Transfer Paper and Powder (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1inkgens DTF PowderBest Overallinkgens DTF Powder9.7/10View on Amazon
  2. 2GO2CRAFT Starter KitBest Starter KitGO2CRAFT Starter Kit9.7/10View on Amazon
  3. 3GOZYE DTF PowderBest Mesh StatedGOZYE DTF Powder9.7/10View on Amazon

A DTF print starts as ink on film and ends as a design on a shirt, and the powder in between is what holds it there. The film carries the print, the powder melts into the adhesive, and the press sets it, and this guide to the best DTF transfer paper and powder compares kits and powders by the film, the powder weight, the mesh and the heat schedule each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall inkgens DTF Powder: 1 kg of white powder in two sealed 500 g bags with a 2 year warranty, for DTF and DTG printers. Check price on Amazon
  • Best Starter Kit GO2CRAFT Starter Kit: 20 films and 500 g of powder with gloves, tray, teflon sheet and tape, plus a full heat schedule. Check price on Amazon
  • Best Mesh Stated GOZYE DTF Powder: 200 mesh uniform particles at TPU 96 percent or more, with a 2 year warranty. Check price on Amazon

Machines on the list

DTF Powder White Digital Transfer Hot Melt

DTF Powder White Digital Transfer Hot Melt

inkgens9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

1 kg of white hot melt adhesive powder in two sealed 500 g bags, with a measuring spoon, gloves and a tray, for DTF and DTG printers.

Pros

  • 1 kg total in two sealed 500 g bags, the largest powder weight here beside the CenDale kilo
  • 2 year warranty, the longest term here beside the GOZYE powder
  • Measuring spoon, gloves and tray included for clean application
  • No fabric pretreatment needed, per the listing

Cons

  • Powder only; no film included, unlike the GO2CRAFT kit
  • No heating temperatures or times stated in the listing
  • No mesh figure stated in the listing
  • No film size stated, though the listing says it suits any PET film size
GO2CRAFT Hot Melt Powder & DTF Transfer Flim

GO2CRAFT Hot Melt Powder & DTF Transfer Flim

GO2CRAFT9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A starter kit with 20 DTF films and 500 g of white powder, plus tweezers, gloves, a tray, a teflon sheet and high-temperature tape.

Pros

  • The only kit here with both film and powder
  • Full heat schedule stated: 310°F / 155°C for 120s, then 320°F / 160°C for 15s and 8s
  • Gloves, tray, teflon sheet, high-temperature tape and powder tools included
  • Powder can be reused, per the listing

Cons

  • 90 day warranty is the smallest stated term here
  • 500 g is half the powder of the 1 kg sets here
  • Title spells film as Flim
  • No mesh figure stated in the listing
GOZYE DTF Transfer Powder

GOZYE DTF Transfer Powder

GOZYE9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

500 g of white hot melt adhesive powder in 200 mesh uniform particles, made of high-purity polyurethane at TPU 96 percent or more.

Pros

  • 200 mesh uniform particles, the only mesh figure stated here
  • TPU 96 percent or more, per the listing
  • 2 year warranty stated in the spec table
  • No pretreatment needed, per the listing

Cons

  • Powder only; no film included
  • Melting point stated as 110 degrees with no unit given
  • No weight stated in the spec table
  • No heating times stated in the listing
CenDale DTF Powder: 1KG/35.2OZ White Hot Melt

CenDale DTF Powder: 1KG/35.2OZ White Hot Melt

CenDale9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1KG white hot melt adhesive powder for DTF transfers, stated for a wide fabric range with a 1 year warranty.

Pros

  • 1KG pack, listed as 35.2 oz, the largest size here
  • 80-200um particle size stated
  • Works with DTF and DTG printers, including converted Epson printers
  • 1 year warranty stated

Cons

  • No press temperature or time stated
  • No stated application rate for hand or shaker use
  • White only; black is a separate listing
Godora DTF Powder, White Hot Melt Adhesive for DTF

Godora DTF Powder, White Hot Melt Adhesive for DTF

Godora9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16 oz white hot melt adhesive powder for DTF transfers in a barrel container, stated for a wide fabric range.

Pros

  • 16 oz barrel-shaped container with a spoon
  • Stated for cotton, silk, polyester, denim, nylon, leather and 50/50 blends
  • Works with an automated shaker or by hand
  • Stated for all DTF and DTG printers on any PET film size

Cons

  • No warranty term stated
  • No particle size stated
  • No press temperature or time stated
  • White only; black is a separate listing

Other machines to compare

Specs compared

Model HQ Score Includes Powder Mesh Heating temp Warranty
inkgens DTF Powder 9.7/10 Powder, spoon, gloves, tray 1 kg (2 x 500 g) Not stated Not stated 2 years
GO2CRAFT Starter Kit 9.7/10 20 films, powder, tools 500 g (17.6 oz) Not stated 310°F / 155°C, 120s 90 days
GOZYE DTF Powder 9.7/10 Powder only 500 g (17.6 oz) 200 mesh Melts at 110 degrees 2 years
CenDale DTF Powder 9.7/10 Powder only 1 kg (35.2 oz) Not stated Not stated Not stated
Godora DTF Powder 9.6/10 Powder only 16 oz Not stated Not stated Not stated

Specs are what each manufacturer publishes as its rating on the listing, collected 11 November 2026.

What the DTF listings tell you

Five listings were read for this guide. Two are title-only listings with no bullets or spec table, so their cards stay short. Three state a warranty term, and two state none. One listing gives a full heat schedule with temperatures and times, and one gives a melting point with no unit. The two powder-only listings state no film at all.

Buying guide: best DTF transfer paper and powder

Film and powder together

Only the GO2CRAFT listing is a kit with both film and powder: 20 DTF films and 500 g of white powder, with tweezers, a sticker, powder collection tools, gloves, a tray, a teflon sheet and high-temperature tape. The inkgens and GOZYE listings are powder only, and the two title-only listings name powder only in their titles.

Powder weight

Powder weights here are 500 g, 1 kg and 16 oz. The GO2CRAFT and GOZYE listings give 500 g, or 17.6 oz. The inkgens set gives 1 kg in two sealed 500 g bags, and the CenDale title gives 1 kg, or 35.2 oz. The Godora title gives 16 oz, the smallest weight here.

Mesh and material

Only the GOZYE listing states a mesh figure: 200 mesh uniform particles, made of high-purity polyurethane at TPU 96 percent or more. The other listings state no mesh figure, so their powders cannot be compared on particle size. The GOZYE listing also says its powder is soft to the touch and elastic, with high adhesion.

Heat schedule

Only the GO2CRAFT listing gives a full heat schedule: melting at 310 degrees F, or 155 degrees C, for 120 seconds, a first heat at 320 degrees F, or 160 degrees C, for 15 seconds, and a reheat at 320 degrees F, or 160 degrees C, for 8 seconds, with a 48 hour wait before the first wash. The GOZYE listing says its powder can be completely melted at 110 degrees, with no unit stated. The inkgens listing says a heat press is required for curing, with no temperatures stated.

Warranty

Warranty terms here run from 90 days to 2 years. The inkgens spec table states 2 Year, the GOZYE spec table states a 2 year warranty, and the GO2CRAFT spec table states a manufacture warranty for 90 days from date of purchase. Two listings state no warranty term at all.

DTF powder handling

Store unused powder in a cool, dry place, as the GO2CRAFT and inkgens listings advise, and do not mix powders from different brands, per the GO2CRAFT listing. See best DTF transfer film for film options.

Project Match

Pair the kit with the work, using only what the listings state about materials and uses:

  • T-shirts, hoodies and cotton garments: all three full-data listings name cotton and polyester; the GO2CRAFT kit adds canvas, hoodies, sneakers, handbags, hats and pillowcases.
  • Dark and black garments: inkgens powder, named ideal for dark and black garments.
  • Beginners: the GO2CRAFT starter kit, which the listing calls the best choice for DTF beginners, with film, powder and tools in one box.
  • Sublimation printers: GOZYE powder, named compatible with DTF and sublimation printers.
  • Large runs: the inkgens 1 kg set or the CenDale 1 kg title, the largest powder weights here; the GO2CRAFT and GOZYE listings give 500 g.

How the scores add up

Each kit is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For DTF paper and powder, performance points come from the stated film and powder, the heat schedule and the mesh, build points from the stated materials and packaging, and warranty points only from a stated term. None of the listings states a safety certification, so all score zero on safety.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
inkgens DTF Powder 9.7 30 21 21 n/a 4
GO2CRAFT Starter Kit 9.7 33 22 21 n/a 3
GOZYE DTF Powder 9.7 29 21 20 n/a 4

HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.

FAQ: lasers and CNC

What is DTF transfer paper?

DTF transfer paper is the film that carries the printed design. The GO2CRAFT listing says its high-quality matte surface is the printing surface, and the inkgens and GOZYE listings say the powder bonds to the ink, not the film.

How does DTF transfer paper work?

Print the design on the film, apply the powder so it sticks to the wet ink, melt the powder, then press the design onto the fabric. The GO2CRAFT listing says the printed pattern can withstand hundreds of washings and is easy to peel, and the inkgens listing says no fabric pretreatment is needed.

How do I transfer DTF?

Apply the powder, melt it, then press. The GO2CRAFT listing gives the schedule: melt at 310 degrees F, or 155 degrees C, for 120 seconds, first heat at 320 degrees F, or 160 degrees C, for 15 seconds, reheat at 320 degrees F, or 160 degrees C, for 8 seconds, and wait 48 hours before the first wash.

Where can I buy DTF film?

The films in this guide come from the GO2CRAFT kit, which includes 20 DTF films with its powder and tools. The other listings here are powder only, so a film must come from a kit or a separate film listing.

Related: best DTF transfer film, best DTF powder, best DTF transfer film, DTF printer for beginners, DTF printer vs heat press, best heat press cooling block and the heat presses and sublimation hub.

More buying guides

Heat Presses and Sublimation ·

Best DTF Powder for Sublimation (2026)

Five DTF powders for sublimation and DTF printing, compared by particle size, melting range, fabric support and warranty.

Heat Presses and Sublimation ·

Best Dtf Powder for Heat Press (2026)

5 hot melt adhesive powders for DTF transfers, from a 1000g SHYXEN with a stated melting range to a fine-grain 600g Carbcolords, compared for…