DTF Printer Maintenance: Cleaning and Care Tips
Flush the printhead, wipe the parts that touch ink, and run a printhead cleaning after use: the routine for keeping a DTF printer printing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CenDale DTF Cleaning Kit9.6/10View on Amazon - 2
Printer Cleaning Kit for Epson9.5/10View on Amazon - 3
Best Printer Cleaning Kit for Epson, HP9.5/10View on Amazon - 4
AAwipes Cleaning Swab Kit Microfiber Knitted9.5/10View on Amazon
DTF ink tends to clog the printhead when it dries, and DTF printer maintenance is the routine for keeping the ink flowing: flush the head, wipe the parts that touch ink, and run a printhead cleaning after use. The kits in this guide cover the cleaning steps, from flushing fluid and syringes to swabs for the head and the parts around it, and the choice comes down to the printer and the ink.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you.
The listings state no cleaning schedule, so this guide gives no interval. Clean when prints show missing colors, lines or streaks, and treat the effectiveness figures below as the listings’ claims, not measured results.

CenDale DTF Cleaning Kit
A 250mL DTF and DTG cleaning kit with an enzyme formula the listing states dissolves dry and wet ink, plus nozzles, a 10ml syringe and 4 cotton swabs.
Pros
- 250mL, the largest volume here
- Made for DTF and DTG ink
- Listing claims 85% to 95% effectiveness
- Yellow and white nozzles sized to the ports
Cons
- No warranty term is stated
- Effectiveness figure is the listing's claim, not a measured result
- Only 4 cotton swabs included
- No second bottle or refill is listed

Printer Cleaning Kit for Epson
A 100mL printhead cleaning kit with a syringe, two nozzles and tubing, listed for Epson, HP, Canon, Brother and DTF printers.
Pros
- 100mL of cleaning fluid
- Yellow nozzle for Epson and Brother, white for HP and Canon
- Listed for DTF printers as well as office inkjets
- Syringe, tubes and gloves in the box
Cons
- No warranty term is stated
- Syringe size is not stated
- No swabs are listed in the box
- No stated effectiveness figure

Best Printer Cleaning Kit for Epson, HP
A 100ml cleaning kit with a LARGE 20ml syringe, listed for Epson, HP, Brother, Canon, DTF and sublimation printers.
Pros
- LARGE 20ml syringe
- 100ml of cleaning fluid
- Listed for DTF and sublimation as well as office inkjets
- Listing advises a printhead cleaning after use
Cons
- No warranty term is stated
- No swabs are named in the listing
- No stated effectiveness figure
- No tube length is stated

AAwipes Cleaning Swab Kit Microfiber Knitted
A kit of 100 lint-free swabs in 5 types, from 72mm to 160mm long, for wiping printheads and other delicate parts.
Pros
- 100 swabs in 5 types, 20 of each
- Lint-free, double-knitted polyester tips
- Lengths from 72mm to 160mm
- Made and packed in a Class 100-1000 cleanroom
Cons
- No cleaning fluid is included
- No warranty term is stated
- No syringe, nozzle or tubing is included
- Orange is the only colour stated
DTF printer maintenance: the short answer
DTF printer maintenance means flushing the printhead with cleaning solution, wiping the head and the parts around it with swabs, and running a printhead cleaning after use, as the Best Printers listing advises, to bring ink back into the printhead. The CenDale kit is the one made for DTF and DTG ink, the Absonic and Best Printers kits cover many inkjet brands as well as DTF, and the AAwipes kit (on Amazon) is the dry tool for wiping. Pick the kit that matches the printer, then follow its instructions.
Flush the printhead with cleaning solution
Flushing is the step the kits in this guide are made for when prints show missing colors, lines or streaks. The CenDale kit (on Amazon) holds 250mL of solution made for DTF and DTG printers, with a 10ml precision syringe, a 10cm cleaning tube, a yellow nozzle, a white nozzle, two L-shaped tubes, 4 cotton swabs, 1 pair of gloves and instructions. The Absonic kit (on Amazon) holds 100mL of fluid with a syringe, a white nozzle, a yellow nozzle, L-shaped tubes, silicone tubing, gloves and instructions. The Best Printers kit (on Amazon) holds 100ml of fluid with a LARGE 20ml syringe and multiple attachments. The yellow nozzle is for Epson printers in both the CenDale and Absonic kits, while the white nozzle is for HP and Canon printers in the Absonic kit and for DTF and DTG printers in the CenDale kit, so check the nozzle against the ink-filling port before flushing. The CenDale listing cautions against spilling the solution onto the motherboard and cables, and the Best Printers listing advises running a printhead or power cleaning after use to bring ink back into the printhead.
Wipe the head and the parts around it
A flush targets the nozzles, while the swabs are made for wiping the head and the parts around it. The AAwipes kit holds 100 swabs in 5 types, 20 of each, with lengths of 72mm, 73mm, 100mm, 125mm and 160mm, and head widths of 3.7mm, 3.2mm, 6.8mm, 13.5mm and 6.8mm. The tips are double-knitted polyester on polypropylene shafts, and the listing states the swabs are lint-free and compatible with most solvents such as IPA. They are produced and packaged in a Class 100-1000 cleanroom, and the listing names inkjet printers among the cleaning jobs they suit. The CenDale kit also includes 4 cotton swabs for the same job.
Match the kit to the printer
The kits differ in what they are made for. The CenDale kit is made for DTF and DTG ink, and the listing names Epson ET8550, L1800 and XP600 printers, plus i3200, DX5 and 4720 printheads. The Absonic kit lists Epson EcoTank, WorkForce, Expression and Stylus printers, plus HP, Canon, Brother, Samsung and Lexmark, and names DTF printers among the printers it covers. The Best Printers kit lists Epson EcoTank and WorkForce, HP Smart Tank and OfficeJet, Canon Pixma, Brother MFC, DTF and sublimation printers. The Absonic listing states its solution works with factory ink, dye, sublimation ink and heat transfer inks. Check the kit against the ink and the printer model before buying.
DTF printer cleaning kits for the workbench
The four kits below cover the flushing and wiping steps above, from the 250mL DTF solution to the 100-swab wiping kit, so pick the kit that matches the printer and the ink.
Common mistakes to avoid
- Letting white ink dry in the head: the CenDale listing states white ink crystallizes when it dries, which is why DTF and DTG inks clog more often than regular inks.
- Spilling solution on the motherboard and cables: the CenDale listing cautions against it.
- Skipping the printhead cleaning after a flush: the Best Printers listing advises running a printhead or power cleaning after use to bring ink back into the printhead.
- Wiping with a swab that leaves lint: the AAwipes listing states its swabs are lint-free.
- Using the wrong nozzle for the ink-filling port: the yellow nozzle is for Epson printers, and the white nozzle is for HP and Canon printers in the Absonic kit and for DTF and DTG printers in the CenDale kit.
FAQ: lasers and CNC
How often should a DTF printer be cleaned?
The listings state no schedule. Clean when prints show missing colors, lines or streaks, which are the signs the Best Printers and CenDale listings name.
Can one cleaning solution work on every inkjet printer?
The Absonic kit lists Epson, HP, Canon, Brother, Samsung and Lexmark printers, and names DTF printers among the printers it covers. The CenDale kit is made for DTF and DTG ink. Check the listing against the printer before buying.
What size syringe comes with the kits?
The Best Printers kit has a LARGE 20ml syringe, and the CenDale kit has a 10ml precision syringe. The Absonic kit includes a syringe, but the listing does not state its size.
Which nozzle goes where?
The yellow nozzle is for Epson printers in both the CenDale and Absonic kits. The white nozzle is for HP and Canon printers in the Absonic kit, and for DTF and DTG printers in the CenDale kit.
Do the kits include swabs?
The AAwipes kit is 100 swabs in 5 types, and the CenDale kit includes 4 cotton swabs. The Absonic kit does not list swabs in the box.
Can the cleaning solution be used on sublimation ink?
The Absonic listing states its solution works with factory ink, dye, sublimation ink and heat transfer inks.
Related: the laser engraver hub, best laser engraver for small business and how to choose a laser engraver. Also see the craft machine guides.




