Best Aluminum T Track 4 Pack 48 Inch (2026)
5 anodized aluminum T-tracks in 48 inch 4-packs, compared by profile, included hardware, alloy and warranty for jigs and fixtures.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPOWERTEC 72161 T-Track9.7/10View on Amazon - 2
Best With WarrantyFOCANDPRO T-Track9.6/10View on Amazon - 3
Best Value PackSeekLiny Silver 48 in9.6/10View on Amazon - 4
Best Blue FinishSeekLiny Blue 48 in9.6/10View on Amazon
A jig that slips mid-cut ruins the piece and the afternoon, and a clamp with nowhere to bite is the usual cause. The best aluminum t track 4 pack 48 inch gives a bench a slotted rail for hold-downs, stops and fixtures, so the work stays put while the router or saw moves.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall POWERTEC 72161 T-Track: 4 tracks with 4 stops, 4 knobs and 4 T-bolts in the box, in anodized aluminum. Check price on Amazon
- Best With Warranty FOCANDPRO T-Track: 1 year warranty stated, with 54 wood screws and a double-cut profile. Check price on Amazon
- Best Value Pack SeekLiny Silver 48 in: 4 pack of 48 inch tracks with 48 screws, in 6063 aluminum. Check price on Amazon
- Best Blue Finish SeekLiny Blue 48 in: Light blue anodized 4 pack, double-cut and pre-drilled. Check price on Amazon
Machines on the list

POWERTEC 72161 48 Inch Double-Cut Profile
A 48 inch double-cut T-track kit with 4 tracks, 4 bi-directional short stops, 4 wing knobs and 4 T-bolts, in extruded anodized aluminum, for jigs and fixtures.
Pros
- Kit includes 4 tracks, 4 stops, 4 knobs and 4 T-bolts
- Double-cut profile with pre-drilled mounting holes
- Fits 5/16 inch and 1/4 inch t-bolts, and 1/4 inch hex bolts
- Weight stated at 3.19 lb
Cons
- No warranty term stated
- Top slot is 23/64 inch wide, and it will not fit mini or 1/4 inch T-track
- No screws stated, only T-bolts and knobs
- Listed alloy reads 6463, not the 6063 the other listings state

Aluminum 48 Inch T-Track with Wood Screws
A 4-pack of 48-inch universal double-cut aluminum t-tracks in 6063 alloy, complete with 48 included wood screws and 12 pre-drilled holes per bar.
Pros
- Includes 48 pieces of #6 x 5/8 in flat head screws, avoiding a separate trip for fasteners
- Four 48 in bars provide extended track coverage for large CNC beds or full workbenches
- Double-cut profile accepts universal woodworking hardware and hold-down clamps
- Extruded 6063 aluminum with frosted anodized surface resists corrosion and grime
Cons
- No warranty term is stated in the listing
- Blue anodized finish shows bright color that may clash with muted shop tables
- Double-cut hardware channel requires blowing out fine dust after router or CNC cuts

FOCANDPRO Aluminum T-Track 48 Inch for woodworking
A 4 pack of 48 inch aluminum T-tracks in 6063 alloy with a fine sandblast anodized finish, double-cut profile, pre-punched holes and 54 wood screws, with a 1 year warranty.
Pros
- 1 year warranty stated
- 54 wood screws included
- 6063 aluminum, fine sandblast anodized
- Fits 1/4 inch or 5/16 inch t-bolts
Cons
- No clamps included, only the tracks and screws
- Silver color only

SeekLiny T Tracks for Woodworking Aluminum 48 inch
A 4 pack of 48 inch T-tracks in 6063 aluminum alloy, 3/4 inch wide by 3/8 inch high, with pre-drilled mounting holes and 48 screws.
Pros
- Full dimensions stated: 48 inch by 3/4 inch by 3/8 inch
- 6063 aluminum, anodized, corrosion resistant
- 48 screws included
- Fits 5/16 inch and 1/4 inch t-bolts, and 1/4 inch hex bolts
Cons
- No warranty term stated
- No weight stated
- Silver color only
- No stops or knobs included

SeekLiny 4pcs T-Track for Woodworking 48" Light
A 4 pack of 48 inch T-tracks in light blue anodized 6063 aluminum alloy, double-cut and pre-drilled, for woodworking jigs and fixtures.
Pros
- Light blue anodized finish
- Double-cut, pre-drilled, 6063 aluminum alloy
- Fits 5/16 inch and 1/4 inch t-bolts, and 1/4 inch hex bolts
- 4 pack of 48 inch tracks
Cons
- No screws stated as included
- No dimensions beyond 48 inch stated
- No weight stated
- No warranty term stated
Other machines to compare
SeekLiny T Tracks for Woodworking Aluminum 48 inch Light BlueCheck price on Amazon
QWORK Aluminum T TrackCheck price on Amazon
POWERTEC 71158-P3Check price on Amazon
T Tracks for Woodworking Aluminum 48 inch Black 4 Pack DoubleCheck price on Amazon
T Tracks for Woodworking Aluminum 48 inch Blue 4 Pack DoubleCheck price on Amazon
Specs compared
| Model | HQ Score | Pack | Length | Profile | Included | Warranty |
|---|---|---|---|---|---|---|
| POWERTEC 72161 T-Track | 9.7/10 | 4 tracks | 48 in | Double-cut | 4 stops, 4 knobs, 4 T-bolts | Not stated |
| FOCANDPRO T-Track | 9.6/10 | 4 pack | 48 in | Double-cut | 54 wood screws | 1 year |
| SeekLiny Silver 48 in | 9.6/10 | 4 pack | 48 in | Double-cut | 48 screws | Not stated |
| SeekLiny Blue 48 in | 9.6/10 | 4 pack | 48 in | Double-cut | Not stated | Not stated |
| HOTTARGET T-Track | 9.7/10 | 4 pack | 48 in | Double-cut | Wood screws | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings tell you, and what they leave out
We read 5 T-track listings. All 5 are 48 inch 4-packs with a double-cut profile. Only 1 stated a warranty term, and 2 are from the same brand. One listing, the HOTTARGET track, gives only a title, with no bullets or spec table at all.
Buying guide: the best aluminum t track 4 pack 48 inch for your bench
Double-cut profile
A double-cut profile takes more than one bolt size. Every listing here fits 5/16 inch and 1/4 inch t-bolts, and 1/4 inch hex bolts, so one track works with most hold-downs and stops. The POWERTEC listing adds a warning: its top slot is 23/64 inch wide, and it will not fit mini or 1/4 inch T-track, so check the slot size on your existing track before ordering.
Length and pack
Every pick here is a 48 inch 4-pack, which suits a bench, a router table or a fence. What differs is the hardware in the box: the SeekLiny silver pack includes 48 screws, the FOCANDPRO pack includes 54 wood screws, and the POWERTEC kit includes 4 stops, 4 knobs and 4 T-bolts instead of screws. The SeekLiny blue pack states no screws, and the HOTTARGET title names wood screws with no count.
Alloy and finish
3 of the 5 state 6063 aluminum alloy: both SeekLiny packs and the FOCANDPRO pack, all anodized, with the SeekLiny silver listing calling its surface corrosion resistant and non-fading. The POWERTEC listing reads 6463 aluminum, which does not match the 6063 the others state, so check with the seller if the alloy matters to you. Finishes here are silver and light blue, with the SeekLiny blue listing calling its color Light Blue and its spec table calling it Skyblue.
What the listing leaves out
Only the FOCANDPRO listing states a warranty, 1 year. Only the POWERTEC listing states a weight, 3.19 lb. The SeekLiny blue listing states no screws, no dimensions beyond the 48 inch length, no weight and no warranty term. The HOTTARGET listing gives only a title, so its alloy, weight and warranty are all unstated.
Project Match
- Router table and jigs: the POWERTEC kit, with 4 stops, 4 knobs and 4 T-bolts in the box.
- A first T-track setup: the SeekLiny silver 4 pack, with 48 screws and full dimensions stated.
- A bench that needs a warranty on paper: the FOCANDPRO 4 pack, with a 1 year warranty stated.
- A color-matched bench: the SeekLiny blue 4 pack, light blue anodized.
How the scores add up
Each track is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a safety certification, so all score zero on safety, and only the FOCANDPRO track states a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| POWERTEC 72161 T-Track | 9.7 | 32 | 22 | 22 | n/a | 0 |
| FOCANDPRO T-Track | 9.6 | 28 | 20 | 19 | n/a | 2 |
| SeekLiny Silver 48 in | 9.6 | 30 | 21 | 21 | n/a | 0 |
| SeekLiny Blue 48 in | 9.6 | 28 | 20 | 20 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
What is a T-track?
It is a slotted aluminum rail that sits in a bench, a router table or a fence, and holds clamps, stops and fixtures with t-bolts. The listings here describe it for woodworking jigs and fixtures, sanding and routing.
What size T-bolts fit these tracks?
Every listing here fits 5/16 inch and 1/4 inch t-bolts, and 1/4 inch hex bolts. The POWERTEC listing warns its top slot is 23/64 inch wide and will not fit mini or 1/4 inch T-track.
Do these T-tracks come with screws?
The SeekLiny silver pack includes 48 screws, and the FOCANDPRO pack includes 54 wood screws. The POWERTEC kit includes 4 T-bolts and 4 knobs instead of screws, the SeekLiny blue pack states no screws, and the HOTTARGET title names wood screws with no count.
What is a double-cut T-track?
All 5 listings here describe a double-cut profile, which takes more than one bolt size. The POWERTEC listing gives the slot size for its double-cut track, a 23/64 inch top slot, and warns it will not fit mini or 1/4 inch T-track, so check your slot size before ordering.
How long are these T-tracks?
All 5 are 48 inches long, in 4-packs. The SeekLiny silver listing also gives the size in millimeters, 1220 mm long, 20 mm wide and 9.5 mm high.
Related: the aluminum T-track for woodworking, our CNC tooling hub and our CNC routers hub. Also see our best CNC router bits. Also see our aluminum extrusion vs cast iron CNC. Also see our ball screw vs lead screw CNC.




