Best Ai Badge Maker (2026)
5 button maker kits for custom pin badges, compared by badge size, supplies, cutter, mat and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Complete KitCaydo 2.25in Kit9.7/10View on Amazon - 2
Best UpgradeableMOUNSKER 2.25in9.7/10View on Amazon - 3
Best AlignmentHTVRONT 58mm9.6/10View on Amazon - 4
Best One-Hand PressTOKKY 58mm9.6/10View on Amazon
A table full of pin badges turns a school fair, a market stall or a team event into something people remember: a logo, a face, a joke, pressed into a round badge and pinned to a jacket. The work starts with a design on paper and a press that crimps it into a metal shell, and the right machine makes that job quick enough to run a whole batch before the doors open. The best ai badge maker for that job is a button maker kit with the right badge size, enough supplies and a cutter that fits the design, and this guide compares 5 of them by size, supplies, cutter, mat and warranty, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Complete Kit Caydo 2.25in Kit: 100 sets, an adjustable circle cutter, 2 hex wrenches, arrives fully assembled, 1-year warranty. Check price on Amazon
- Best Upgradeable MOUNSKER 2.25in: Takes 1 and 1.25 inch mold sets, works with metal and plastic, 1-year manufacturer warranty. Check price on Amazon
- Best Alignment HTVRONT 58mm: Horizontal slide-rail alignment, support-arm lever, A4 craft mat and paper weight guidance. Check price on Amazon
- Best One-Hand Press TOKKY 58mm: Long handle, dual metal guide posts, 100 sets and a circle cutter, no assembly needed. Check price on Amazon
Machines on the list

Caydo 2.25in(58mm) Button Maker Machine Kits
A 2.25 in (58 mm) button maker kit with 100 sets of supplies, an adjustable circle cutter, a washer and 2 hex wrenches, arriving fully assembled.
Pros
- 100 full sets of supplies: metal blanks, metal pin backs, mylar films and blank papers
- Arrives fully assembled, with an illustrated guide and video tutorials
- Metal pin backs form a smooth, tight crimp that holds every layer in place
- 1-year warranty stated in the spec table
Cons
- No cutting mat is listed with the kit
- Largest footprint here at 17.7 x 10.3 x 3.8 inches
- No mold sizes beyond 2.25 in are listed
- No paper weight guidance is listed

Mounsker Button Maker Machine 2.25inch(58mm)
A 2.25 in (58 mm) button maker with 100 button parts, an adjustable circle cutter and an A5 cutting mat, in an elephant design that lifts its ears when pressed.
Pros
- 100 button parts, an adjustable circle cutter and an A5 cutting mat in the kit
- Upgradeable with 1 and 1.25 inch mold sets for smaller badges
- Works with metal and plastic materials, with a shim washer for metal backs
- 1-year manufacturer warranty stated in the spec table
Cons
- Mold sets for other sizes are sold separately
- No video guide is listed, only written instructions
- No paper weight guidance is listed
- No hex wrench is listed with the kit

HTVRONT Button Maker Machine Pin Maker
A 58 mm (2.25 in) badge maker with a horizontal slide-rail design, a support-arm lever, 100 button supplies, a circle cutter and an A4 craft mat.
Pros
- Horizontal slide-rail design keeps the A Base and B Base aligned with no rotation
- Support-arm-assisted lever spreads pressure evenly for an easier press
- Paper guidance: 127 to 159 g/m, with thickness ranges for glossy, matte and photo paper
- 100 button supplies with an adjustable circle cutter and an A4 craft mat
Cons
- No warranty term is stated
- No dimensions are listed in the spec table
- No video guide is listed
- Compatible only with 58 mm round backs, per the listing

TOKKY Button Maker Machine 58mm - One-Hand Press
A 58 mm button maker with a one-hand press, dual metal guide posts, 100 sets of supplies, a circle cutter, a hex wrench and a screwdriver.
Pros
- Long handle multiplies force for low-effort pressing
- Dual metal guide posts and a vertical press hold the mold perpendicular
- 100 sets of 58 mm badge parts, plus a circle cutter, hex wrench and screwdriver
- High-strength engineering plastic resists cracking for a long service life
Cons
- No warranty term is stated
- No cutting mat is listed with the kit
- Children should use it under adult supervision, per the listing
- No mold sizes beyond 58 mm are listed

KOUISYY Button Maker Machines
A 2.16 in badge maker in ABS, with 48 button parts, no installation needed, sized at 15 x 12 x 7 cm and weighing 1.83 pounds.
Pros
- ABS body is sturdy and lightweight at 1.83 pounds
- No installation needed, ready to use directly
- Compact size of 15 x 12 x 7 cm for a small craft table
- 48 button parts included in the kit
Cons
- No warranty term is stated
- Smallest badge size here at 2.16 in, with no other sizes listed
- No circle cutter or cutting mat is listed with the kit
Other machines to compare
Happizza Button Maker Machine Multiple SizesCheck price on Amazon
Button Maker Machine 75mmCheck price on Amazon
Button Maker Machine 3 SizesCheck price on Amazon
Button Maker Machine 58mmCheck price on Amazon
Happizza Button Maker Machine Multiple-SizesCheck price on Amazon
Specs compared
| Model | HQ Score | Badge size | Supplies | Cutter | Mat | Warranty |
|---|---|---|---|---|---|---|
| Caydo 2.25in Kit | 9.7/10 | 2.25 in (58 mm) | 100 sets | Adjustable | Not stated | 1 year |
| MOUNSKER 2.25in | 9.7/10 | 2.25 in (58 mm) | 100 pcs | Adjustable | A5 | 1 year |
| HTVRONT 58mm | 9.6/10 | 58 mm (2.25 in) | 100 pcs | Adjustable | A4 | Not stated |
| TOKKY 58mm | 9.6/10 | 58 mm | 100 sets | Included | Not stated | Not stated |
| KOUISYY 2.16in | 9.6/10 | 2.16 in (5.5 cm) | 48 pcs | Not stated | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings tell you, and what they leave out
5 listings were compared. All 5 are manual button maker presses, and none of the 5 listings describes AI features. 4 press a 2.25 in (58 mm) badge, and 1 presses a 2.16 in (5.5 cm) badge. 4 kits include 100 sets or 100 pieces of supplies, and 1 includes 48 pieces. 4 include a circle cutter, and 2 include a cutting mat. 2 state a 1-year warranty, and 3 state no warranty term.
Paper matters more than the press for a clean badge: the HTVRONT listing recommends paper of 127 to 159 g/m, with glossy coated paper at 0.10 to 0.14 mm, matte coated paper at 0.11 to 0.16 mm and thin inkjet photo paper at 0.15 to 0.20 mm. No other listing states a paper weight or thickness.
How to pick the best ai badge maker
Badge size
4 of the 5 makers press a 2.25 in (58 mm) badge, and the KOUISYY press makes a 2.16 in (5.5 cm) badge. The MOUNSKER press is upgradeable with 1 and 1.25 inch mold sets for smaller badges, so check the mold sizes before settling on one press.
Supplies in the kit
Count the sets before the first batch: Caydo, MOUNSKER, HTVRONT and TOKKY each include 100 sets or 100 pieces, while KOUISYY includes 48 pieces. Caydo adds a washer and 2 hex wrenches, and TOKKY adds a hex wrench and a screwdriver.
Alignment and pressing
Alignment decides whether a badge comes out straight. HTVRONT uses a horizontal slide rail that keeps the A Base and B Base aligned with no rotation of the die, and a support-arm lever that spreads pressure evenly. TOKKY uses dual metal guide posts and a vertical press to hold the mold perpendicular, and Caydo uses a contoured handle with a leverage system that spreads force evenly. MOUNSKER warns that the mold must align with the mark points, or the button fails.
Paper and materials
Metal and plastic backs both appear in these listings: Caydo uses metal pin backs, MOUNSKER takes metal with a shim washer and plastic without one, and HTVRONT works with 58 mm round backs for pins, bottle openers and keychains. Paper weight matters too: HTVRONT recommends 127 to 159 g/m, and no other listing states a paper weight.
Warranty and support
2 listings state a warranty term: Caydo lists 1 year, and MOUNSKER lists 1 year manufacturer. HTVRONT, KOUISYY and TOKKY state no warranty term. Caydo adds a step-by-step video and an illustrated guide, and its support team answers by message, per the listing.
Project Match
- School projects and classroom rewards: HTVRONT, with slide-rail alignment, an A4 craft mat and paper guidance for classroom use.
- Market stalls and pop-up shops: Caydo, with 100 sets, a fully assembled press and a video guide for a first pin collection.
- Events and fundraisers: TOKKY, with 100 sets, a one-hand press and a simple load, press, rotate and press again workflow.
- Smaller badges for gifts and party favors: MOUNSKER, upgradeable with 1 and 1.25 inch mold sets.
- Small batches on a compact table: KOUISYY, an ABS press at 1.83 pounds with 48 button parts.
How the scores add up
Each maker is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a laser class or a safety certification, so all score zero on safety, and 3 give no warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Caydo 2.25in Kit | 9.7 | 32 | 21 | 22 | n/a | 3 |
| MOUNSKER 2.25in | 9.7 | 30 | 20 | 21 | n/a | 3 |
| HTVRONT 58mm | 9.6 | 30 | 21 | 21 | n/a | 0 |
| TOKKY 58mm | 9.6 | 29 | 21 | 21 | n/a | 0 |
| KOUISYY 2.16in | 9.6 | 28 | 20 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What size badges do these makers press?
4 press a 2.25 in (58 mm) badge, and the KOUISYY press makes a 2.16 in (5.5 cm) badge. The MOUNSKER press is upgradeable with 1 and 1.25 inch mold sets for smaller badges.
What comes in the kit?
Every kit includes the press and button parts: Caydo, MOUNSKER, HTVRONT and TOKKY include 100 sets or 100 pieces, while KOUISYY includes 48 pieces. Caydo, MOUNSKER, HTVRONT and TOKKY include a circle cutter, and MOUNSKER and HTVRONT add a cutting mat.
Can these makers press metal and plastic backs?
MOUNSKER works with metal and plastic: put the shim washer in first for metal backs, and leave it out for plastic. Caydo uses metal pin backs, and HTVRONT works with 58 mm round backs for pins, bottle openers and keychains.
Are these badge makers safe for kids?
TOKKY states that children should use it under adult supervision. HTVRONT describes its slide-rail design as easier for kids, with no rotation of the die and a lever that spreads pressure evenly.
Do any of these makers state a warranty?
2 do: Caydo lists 1 year, and MOUNSKER lists 1 year manufacturer. HTVRONT, KOUISYY and TOKKY state no warranty term.
Related: the best sublimation button blanks with pins, the best heat press machine multi function, the best cutting machine stand and our craft machines hub.




