Best Square Badge Maker (2026): 5 Picks for Pins and Magnets
Five square badge makers for pins and fridge magnets, compared by badge size, sets included, mold swaps and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallNantFun 300-Set Kit9.8/10View on Amazon - 2
Best Square and RoundNantFun 100-Set Kit9.7/10View on Amazon - 3
Best Square PinsHappizza Pin Maker9.6/10View on Amazon - 4
Best Fridge MagnetsHappizza Magnet Maker9.5/10View on Amazon - 5
Best for Simple SetupDCBADGE Magnet Maker9.5/10View on Amazon
A square badge turns a photo, a logo or a sketch into something a visitor can pin on a jacket or stick to a fridge, and a badge maker press is the tool that folds paper, film and backing into a finished badge. This guide to the best square badge maker compares presses for parties, school events, fundraisers and small business giveaways, and what each listing states about badge size, shapes, supplies and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall NantFun 300-Set Kit: Three shapes, 300 sets of pin and magnet supplies, a circle cutter and templates, and a 1 Year Warranty in the listing. Check price on Amazon
- Best Square and Round NantFun 100-Set Kit: Square magnets and round pins in one kit, with a magnetic baseplate the listing says swaps molds in 5 seconds. Check price on Amazon
- Best Square Pins Happizza Pin Maker: A 50 mm square pin maker with 100 sets of parts, papers and films, ready to use without installation. Check price on Amazon
- Best Fridge Magnets Happizza Magnet Maker: A 50 mm square magnet maker with 100 sets of supplies and a swivel mount the listing says improves accuracy. Check price on Amazon
- Best for Simple Setup DCBADGE Magnet Maker: An integrated 50 mm square magnet maker the listing says needs no assembly, with 100 sets of supplies. Check price on Amazon
Machines on the list

Button Maker Machine Kit, Square
A square, round and heart badge maker kit with 300 sets of pin and magnet supplies, a circle cutter, size templates and a manual.
Pros
- Three molds in one machine: square, round and heart shapes for pins and fridge magnets
- 300 sets in the box: 150 pinback supplies and 150 magnet supplies
- Magnetic base mold the listing says installs in 6 seconds, with a 3-step operation
- Round circle cutter and square and heart size templates included, plus a manual
Cons
- Heart shape size is not stated in the listing
- Printed artwork or photos are prepared separately, per the listing
- The listing states no safety certification or material for the machine body
- At 9.25 inches x 3.15 inches x 14.4 inches, it is a tall unit for a small craft table

Button Maker Machine, Square & Round Button Badge
A square and round button press kit with 50 square magnet sets and 50 round pinback sets, and a magnetic baseplate for mold swaps.
Pros
- Makes 2.25 in round button pins and 2 in x 2 in square fridge magnets
- Magnetic baseplate the listing says installs in 5 seconds for mold swaps
- Simple 3-step operation: assemble, insert button refills, press
- Listing states a 1-year warranty
Cons
- Only 100 sets in the box, against 300 in the larger kit
- No circle cutter or size templates are listed in the box
- Square badges are magnets only and round badges are pins only, so each shape has one backing
- No safety or material statement for the machine body in the listing

Happizza Square Button Maker Machine
A 50 mm square pin badge press with 100 sets of button parts, blank papers and clear films, plus a square cutting template.
Pros
- 100 sets of parts: metal covers, plastic back covers, blank papers and clear films
- Square cutting template included in the kit
- Ergonomic handle and swivel mount the listing says take less effort and improve accuracy
- Ready to use upon unpacking without installation, per the listing
Cons
- Makes square pin badges only, with no round or magnet option in the listing
- The listing promises free replacement or refund for quality problems but states no warranty term
- The listing warns that a wrongly placed back cover makes the badge press unsuccessfully
- No second badge shape and no mold swap time are stated in the listing

Happizza Magnet Button Maker Machine 50mm/1.97
A 50 mm square fridge magnet maker with 100 sets of magnet supplies, a square plastic template and a gift box.
Pros
- 100 sets of fridge magnet parts: clear film, square blank paper and soft magnet
- Square-shaped plastic template included
- Ergonomic handle and swivel mount the listing says take less effort and improve accuracy
- Ready to use upon unpacking without installation, per the listing
Cons
- Makes square fridge magnets only, with no pin option in the listing
- No warranty term is stated in the listing
- The listing gives a 4-step process, one step more than the 3-step pin maker
- The listing states high strength engineering plastics rather than a metal body

DCBADGE Square-Shaped Button Maker
A 50 mm square fridge magnet maker with 100 sets of magnet supplies and an integrated body the listing says needs no assembly.
Pros
- 100 sets of supplies: fridge magnet parts, blank papers, clear films and soft magnets
- Machine body and button-model are integrated, with no assembly needed, per the listing
- Built-in metal pressure lever, per the listing
- Gift box included in the kit
Cons
- Warranty Description in the listing reads 'no', so no warranty is stated
- Makes square fridge magnets only, with no pin option in the listing
- No mold swap time or second shape is stated in the listing
- The listing calls the maker a globally renowned brand with 20 years of expertise, with no checkable detail given
Other machines to compare
Happizza Button Maker Machine Multiple SizesCheck price on Amazon
Button Maker Machine 75mmCheck price on Amazon
Button Maker Machine 3 SizesCheck price on Amazon
Button Maker Machine 58mmCheck price on Amazon
Happizza Button Maker Machine Multiple-SizesCheck price on Amazon
Specs compared
| Model | HQ Score | Badge size | Sets included | Shapes | Mold swap | Warranty |
|---|---|---|---|---|---|---|
| NantFun 300-Set Kit | 9.8/10 | 2.25 in round, 2 in square, heart | 300 | Square, round, heart | 6-second magnetic base mold | 1 Year Warranty |
| NantFun 100-Set Kit | 9.7/10 | 2 in square, 2.25 in round | 100 | Square, round | 5-second magnetic baseplate | 1-year |
| Happizza Pin Maker | 9.6/10 | 50 mm square | 100 | Square | Not stated | No term stated |
| Happizza Magnet Maker | 9.5/10 | 50 mm square | 100 | Square | Not stated | Not stated |
| DCBADGE Magnet Maker | 9.5/10 | 50 mm square | 100 | Square | Not stated | No warranty stated |
Specifications are as published on each listing and collected 12 November 2026. Sizes are the badge sizes each listing states, and sets are the badge supplies in the box.
What the listings tell you, and what they leave out
The guide covers 5 badge makers. Only 2 state a warranty term, both NantFun kits with a 1-year term. The DCBADGE listing states no warranty, one Happizza listing promises free replacement or refund for quality problems without a term, and the second Happizza listing states no warranty term at all.
Mold swap times are just as thin: 2 listings state a time, 5 seconds for the NantFun square and round kit and 6 seconds for the 3-shape kit, while the other 3 state no swap time. Every listing states a square badge size of 50 mm, or 2 in, and the two NantFun kits add a round size of 2.25 in. Each box holds 100 sets, except the 3-shape kit with 300 sets.
Two listings state the clear film is made of PVC material, and one states the machine body uses high strength engineering plastics. No listing states a safety certification, a laser class or an FDA accession number, which fits a hand press with no laser source, so no pick earns safety points.
How to choose the best square badge maker
Badge size and shape
Every pick presses a 50 mm square badge, also given as 2 in or 1.97 in. The two NantFun kits add a round badge of 2.25 in, and the 300-set kit adds a heart shape with no size stated. A maker who only wants square badges can ignore the extra molds, while a maker who wants more than one shape gets more from the 3-shape kit.
Pins or magnets
Pin badges and fridge magnets need different backings. The NantFun kits include both: the 300-set kit holds 150 pinback and 150 magnet supplies, while the square and round kit holds 50 square magnet and 50 round pinback sets. The Happizza pin maker makes pins only and the two magnet makers make magnets only, so a maker who wants both backings needs a kit that lists both.
Mold swaps and setup
Swapping molds is where the NantFun kits stand out: a magnetic baseplate or base mold, with installation times of 5 seconds and 6 seconds in the listings. The Happizza presses and the DCBADGE press make no swap claim, and instead stress that the machine is ready to use upon unpacking without installation. The NantFun 3-step operation still starts with assembly.
What comes in the kit
Sets in the box run from 100 to 300, and the count decides how many badges a maker can press before ordering refills. The 300-set kit also includes a round circle cutter, square and heart size templates and a manual, while the other kits list a single template each or, in the case of the NantFun square and round kit, no cutter or template at all. A gift box comes with both Happizza presses and the DCBADGE magnet maker, which suits a maker buying the press as a present.
Project Match
Pair the project with the pick whose listing states the matching shape and supplies:
- School events, classroom projects and keepsakes: NantFun 300-Set Kit, with square, round and heart molds and 150 pinback and 150 magnet supplies, plus a manual.
- Fundraiser pins and business logos: NantFun 100-Set Kit, with 50 round pinback sets for people and 50 square magnet sets for fridges.
- Fridge magnets from family photos and travel souvenirs: Happizza Magnet Maker, with 100 sets of magnet supplies and a square plastic template.
- Square pin badges for parties and gifts: Happizza Pin Maker, with 100 sets of pin parts, papers and films and a square cutting template.
- Simple magnet making for family crafting: DCBADGE Magnet Maker, with an integrated body the listing says needs no assembly and 100 sets of supplies.
How the scores add up
Each machine is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| NantFun 300-Set Kit | 9.8 | 32 | 21 | 22 | n/a | 4 |
| NantFun 100-Set Kit | 9.7 | 29 | 21 | 21 | n/a | 4 |
| Happizza Pin Maker | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Happizza Magnet Maker | 9.5 | 27 | 20 | 19 | n/a | 0 |
| DCBADGE Magnet Maker | 9.5 | 26 | 20 | 18 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What size badges does a square badge maker press?
Every pick presses a 50 mm square badge, given as 2 in or 1.97 in. The two NantFun kits also press a round badge of 2.25 in, and the 300-set kit adds a heart shape with no size stated.
Can one machine make pins and magnets?
Yes, with the right kit. The NantFun 300-set kit includes 150 pinback supplies and 150 magnet supplies, and the square and round kit includes 50 round pinback sets and 50 square magnet sets. The Happizza and DCBADGE presses make one backing only, pins or magnets, as each listing states.
Do these badge makers need assembly?
It depends on the listing. The Happizza presses and the DCBADGE press are described as ready to use upon unpacking without installation, and the DCBADGE body is integrated with its button model. The NantFun kits describe a 3-step operation that starts with assembly.
What comes in the box besides the press?
Every kit includes badge supplies in sets of 100 or 300, with blank papers, clear films and backings. The 300-set kit adds a round circle cutter, square and heart size templates and a manual, while the other kits list a single template each or no template at all. Three kits also include a gift box.
How do I swap molds between shapes?
On the NantFun kits, the listing describes a magnetic baseplate or base mold for mold swaps, with installation times of 5 seconds and 6 seconds. The other listings state no mold swap method or time.
Related: our best custom badge maker picks, the best die cut machine for card making, and the best cutting machine for cardstock. Also see our best embossing machine for card making and best craft table with drawers.




