Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Sublimation Button Blanks with Pins (2026)

MDF and metal sublimation button blanks with pins in packs of 30 to 80 pieces, compared on diameter, thickness and press settings for badge makers.

Best Sublimation Button Blanks with Pins (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Ovveroche 80-PackBest OverallOvveroche 80-Pack9.7/10View on Amazon
  2. 2Knitgrip 50-PackBest 50-PackKnitgrip 50-Pack9.6/10View on Amazon
  3. 3AiDiYGECO 30-PackBest for Small BatchesAiDiYGECO 30-Pack9.6/10View on Amazon
  4. 4Hicarer Metal BadgeBest Metal BadgeHicarer Metal Badge9.4/10View on Amazon

Photo buttons, name tags and badge pins sell well at markets and in online shops, and they start as a blank disc plus a pin back. The best sublimation button blanks with pins give you a flat white face that takes a mirrored print, a pin that stays put, and a pack size that matches the batch you plan to press. This guide compares MDF blanks and a metal badge on count, diameter, thickness and press settings, so you can pick the blank that fits the badge you want to make.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Ovveroche 80-Pack: 80 pieces of 3 in MDF, 3 mm thick, pressing in 40 to 60 seconds. Check price on Amazon
  • Best 50-Pack Knitgrip 50-Pack: 50 pieces of 3 in MDF, 3 mm thick, pressing in 60 to 70 seconds. Check price on Amazon
  • Best for Small Batches AiDiYGECO 30-Pack: 30 pieces of 3 in MDF, 3 mm thick, pressing in 60 to 70 seconds. Check price on Amazon
  • Best Metal Badge Hicarer Metal Badge: 30 metal badge pins with a 1 in center circle and an aluminum sheet. Check price on Amazon

Machines on the list

Ovveroche 80 Pack Sublimation Buttons Blanks

Ovveroche 80 Pack Sublimation Buttons Blanks

Ovveroche9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

80 pieces of 3 in MDF sublimation button blanks with self-adhesive pins, 3 mm thick, with a press time of 40 to 60 seconds.

Pros

  • 80 pieces, the largest pack here, with 80 self-adhesive pins
  • 3 in diameter and 3 mm thick MDF hardboard, hard and not easily damaged
  • Press time of 40 to 60 seconds, the lowest stated here, at 355 to 375 F
  • Protective film on the white sides, removed before printing for a good sublimation effect

Cons

  • No warranty term is stated
  • Pins are self-adhesive, so placement is fixed once stuck
  • 80 pieces may be more than a one-off project needs
  • MDF only, with no metal blank in this listing
Knitgrip 50 Pcs Sublimation Buttons Blanks

Knitgrip 50 Pcs Sublimation Buttons Blanks

Knitgrip9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

50 pieces of 3 in MDF sublimation button blanks with self-adhesive pins, 3 mm thick, with a press time of 60 to 70 seconds.

Pros

  • 50 pieces with 50 self-adhesive pins, a mid-size pack for batch work
  • 3 in diameter and 3 mm thick MDF hardboard, strong and not easy to harm
  • Press temperature of 355 to 375 F and press time of 60 to 70 seconds
  • Protective film on the white side, removed before printing for a good sublimation effect

Cons

  • No warranty term is stated
  • Press time of 60 to 70 seconds is longer than the 40 to 60 seconds on the Ovveroche pack
  • Diameter is stated as about 3 inches, not an exact figure
  • MDF only, with no metal blank in this listing
30Pcs Sublimation Buttons Blanks with Pins 3 inch

30Pcs Sublimation Buttons Blanks with Pins 3 inch

AiDiYGECO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

30 pieces of 3 in MDF sublimation button blanks with self-adhesive pins, 3 mm thick, with a press time of 60 to 70 seconds.

Pros

  • 30 pieces with 30 self-adhesive pins, a small pack for one run
  • 3 in diameter and 3 mm thick MDF hardboard, hard and not easily damaged
  • Press temperature of 355 to 375 F and press time of 60 to 70 seconds
  • Protective film on the white sides, removed before printing for good sublimation effects

Cons

  • No warranty term is stated; the warranty field reads only '1'
  • 30 pieces is the smallest MDF pack here
  • Press time of 60 to 70 seconds is longer than the 40 to 60 seconds on the Ovveroche pack
  • Pins are self-adhesive, so placement is fixed once stuck
38 pcs Sublimation Buttons Blank pins MDF 2.6INCH

38 pcs Sublimation Buttons Blank pins MDF 2.6INCH

LaiHiulaan9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

38 pieces of 2.65 in MDF sublimation button blanks with pins, 3 mm thick, with a press time of 60 to 70 seconds.

Pros

  • 38 pieces per the title and spec table, with pins in the pack
  • 2.65 in diameter and 3 mm thick MDF, smaller than the 3 in blanks here
  • White coating for vibrant colors, sharp details and long-lasting, fade-resistant prints, per the listing
  • Press guide included: mirrored design, heat-resistant tape, 355 to 375 F for 60 to 70 seconds

Cons

  • No warranty term is stated
  • 2.65 in is smaller than the 3 in blanks here, so designs must fit a smaller face
  • MDF only, with no metal blank in this listing
Hicarer 30 Pieces Sublimation Blank Badge Pins DIY

Hicarer 30 Pieces Sublimation Blank Badge Pins DIY

Hicarer9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

30 metal badge pins with a 1 in center circle and a 0.9 in aluminum sublimation sheet, with double-sided tape on the back.

Pros

  • 30 badge pins with 30 aluminum sheets, a metal blank instead of MDF
  • Zinc alloy part with an aluminum sublimation sheet, wear resistant per the listing
  • Center circle of about 1 in with a sublimation sheet of about 0.9 in
  • Aluminum sheet is water resistant and heat resistant, per the listing

Cons

  • No warranty term is stated
  • No press temperature or press time is stated in the listing
  • Sublimation area is about 0.9 in, far smaller than the 3 in MDF faces here
  • Metal badge format, not a full-face button blank

Other machines to compare

Specs compared

Blank HQ Score Count Diameter Thickness Material Press time Warranty
Ovveroche 80-Pack 9.7/10 80 pieces 3 in 3 mm MDF 40-60 seconds Not stated
Knitgrip 50-Pack 9.6/10 50 pieces 3 in 3 mm MDF 60-70 seconds Not stated
AiDiYGECO 30-Pack 9.6/10 30 pieces 3 in 3 mm MDF 60-70 seconds Not stated
LaiHiulaan 38-Pack 9.5/10 38 pieces 2.65 in 3 mm MDF 60-70 seconds Not stated
Hicarer Metal Badge 9.4/10 30 pieces 1 in center circle Not stated Zinc alloy, aluminum Not stated Not stated

Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026.

Most button blank listings are the same 3 inch MDF blank

3 of the 5 blanks here are 3 inch MDF discs, 3 mm thick, with self-adhesive pins and the same press window of 355 to 375 F. The differences are the pack count, the press time and the pin. A smaller blank measures 2.65 in, and a metal badge carries a 1 in center circle instead of a full-face disc, so size and count drive the choice among the MDF blanks, while the metal badge is a different format.

Buying guide: best sublimation button blanks with pins

Match the blank to the badge you want to make

A 3 in MDF blank fits name tags, photo buttons and badges with room for a photo or a name, while the 2.65 in blank fits smaller ornaments and ID cards. The metal badge fits a 1 in center circle, so it suits a small logo or one image, not a full-face photo. Check the diameter before ordering, since the printable face is the blank itself.

Press settings: temperature and time

All 4 MDF blanks state a press temperature of 355 to 375 F. The Ovveroche pack states a press time of 40 to 60 seconds, while the other 3 MDF blanks state 60 to 70 seconds. The metal badge states no press temperature or time, so its settings are Not stated in the table. Remove the protective film from the white side before printing, per every MDF listing here.

Pins, film and the mirrored print

The MDF blanks come with self-adhesive pins, and the metal badge comes with double-sided tape on the back. Print a mirrored design, hold it with heat-resistant tape, and press, per the LaiHiulaan press guide. The Ovveroche listing says its pins are extremely stable once installed and will not move. If you press for clients, check that the pin back matches the garment or bag the badge will sit on.

Count the pack against the batch

Pack counts here run from 30 pieces to 80 pieces. A 30-piece pack suits one run of name tags or gifts, while an 80-piece pack suits a market stall or a run of client orders. Check the count in the title and the spec table together, since one listing here states two counts: the LaiHiulaan title and spec table say 38 pieces while one bullet says 30.

Safety

A heat press runs at 355 to 375 F, so treat the platen and the fresh blank as hot, keep fingers clear of the press, and let blanks cool before handling the pin. Press in a ventilated space and follow the press maker’s guidance for the machine you own.

Project Match

Project Pick Why it fits
Name tags and school projects Ovveroche 80-Pack 3 in MDF, 80 pieces with pins, press time 40 to 60 seconds
Photo buttons and badges Knitgrip 50-Pack 3 in MDF, 50 pieces with pins, press time 60 to 70 seconds
Christmas ornaments and gifts AiDiYGECO 30-Pack 3 in MDF, 30 pieces, listed for Christmas decoration gifts
Small ornaments and ID cards LaiHiulaan 38-Pack 2.65 in MDF, listed for ornaments, name tags and ID cards
Small metal badges Hicarer Metal Badge Metal badge with a 1 in center circle and an aluminum sheet

How the scores add up

Each blank is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Ovveroche 80-Pack 9.7 32 21 22 n/a 0
Knitgrip 50-Pack 9.6 30 21 21 n/a 0
AiDiYGECO 30-Pack 9.6 29 20 20 n/a 0
LaiHiulaan 38-Pack 9.5 27 19 19 n/a 0
Hicarer Metal Badge 9.4 24 19 18 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.

FAQ: lasers and CNC

What temperature and time do sublimation button blanks press at?

All 4 MDF blanks here state 355 to 375 F. The Ovveroche pack states 40 to 60 seconds, and the other 3 state 60 to 70 seconds. The metal badge states no press temperature or time.

Do I remove the protective film before pressing?

Yes. All 4 MDF listings say to remove the protective film from the white side before printing, for a good sublimation effect. The metal badge has no film stated; it comes with an aluminum sheet and double-sided tape.

What size are sublimation button blanks?

3 in across on 3 of the 5 blanks here, 2.65 in on the LaiHiulaan blank, and a 1 in center circle on the Hicarer metal badge. All are 3 mm thick where a thickness is stated.

Are sublimation button blanks MDF or metal?

4 of the 5 blanks here are MDF hardboard, and 1 is metal: the Hicarer badge is a zinc alloy part with an aluminum sublimation sheet. MDF blanks give a full-face white disc; the metal badge gives a 1 in center circle.

Do sublimation button blanks include the pins?

Yes. Every blank here includes pins: the MDF packs include self-adhesive pins, and the Hicarer pack includes 30 pins with double-sided tape on the back and 30 aluminum sheets.

Related: best sublimation blanks, best sublimation puzzle blanks, best heat press machine multi function, best mug heat press for sublimation and the craft machines hub. Also see the heat presses and sublimation category.

More buying guides