Air Fitting Size Chart for Air Assist and Compressors
An air fitting size chart matches NPT threads to ports and push-to-connect fittings to tube sizes, so the right fitting can seal.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CheeMuii 260 PCS Brass DOT Air Line Fittings9.7/10View on Amazon - 2
CheeMuii 136 Pcs Brass DOT Air Line Fittings Kit9.6/10View on Amazon - 3
Ailbiuko 200 PCS Pneumatic Quick Connect Air Hose9.4/10View on Amazon - 4
Ailbiuko 45Pcs 1/4" Air Hose Fittings Coupler9.3/10View on Amazon
An air fitting size chart answers a question before a fitting is ordered: which thread screws into the port, and which push-to-connect fitting takes the tube. Match the thread to the port and the fitting to the outside of the tube, and the joint can seal; mix the sizes and the joint will not seal. This guide reads the chart for air assist and compressor lines, then shows the kits that cover each size.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

CheeMuii 260 PCS Brass DOT Air Line Fittings
A 260-piece brass DOT fitting kit with 4 rolls of 50 ft DOT air line in 1/8, 1/4, 3/8 and 1/2 inch sizes for air assist and compressor lines.
Pros
- 260 pieces and 4 rolls of 50 ft DOT air line, 1/8 to 1/2 inch
- CA360 brass, DOT FMVSS 571.106 and SAE J1131
- PA12 air lines rated from vacuum to 500/800 PSI
- 2 tube cutters and 2 Teflon tape rolls
Cons
- No warranty term is stated
- Schrader valves come in 1/4 inch only
- The 11.4 x 11.4 x 7.3 inch box needs shelf space
- A short run still opens a full 50 ft roll

CheeMuii 136 Pcs Brass DOT Air Line Fittings Kit
A 136-piece CA360 brass DOT fitting kit in 5/32, 1/8, 1/4, 3/8 and 1/2 inch sizes with a tube cutter and Teflon tape for DOT air lines.
Pros
- 136 pieces cover tees, straight unions, elbows, bushings and couplings
- CA360 pure brass meets DOT FMVSS 571.106 and SAE J1131 requirements
- Vacuum to 800 PSI, -40 to +248 degrees Fahrenheit
- Tube cutter and Teflon tape included in the box
Cons
- No warranty term is stated
- Schrader valves come in 1/4 inch only
- Fittings only, with no air line tubing in the box
- 1 tube cutter and 1 tape roll for 136 pieces

Ailbiuko 200 PCS Pneumatic Quick Connect Air Hose
A 200-piece push-to-connect fitting kit in 1/8, 1/4, 3/8 and 1/2 inch sizes with ball valves, tubing caps and plugs for air lines.
Pros
- 200 pieces in four sizes and seven types, sorted in a transparent portable box
- Nickel-plated brass and PBT with stainless steel lock claws
- 2 ball valves, 55 tubing caps and 33 fitting plugs
- Push-to-connect design suits PU, PA, PE and PVC tubes
Cons
- 145 PSI maximum, below the 800 PSI rating of the CheeMuii 136-piece kit
- 0 to 60 degrees Fahrenheit, narrower than the CheeMuii kits
- Only 6 straight union reducers
- Some parts are PBT plastic rather than solid brass

Ailbiuko 45Pcs 1/4" Air Hose Fittings Coupler
A 45-piece 1/4 inch NPT quick-connect coupler and plug kit in iron with copper plating for compressor hoses and air tools.
Pros
- 45 pieces cover couplers, plugs, hex couplers and hex nipples in 1/4 inch
- Iron fittings with copper plating for corrosion resistance
- 4 large locking balls lock the plug in place
- 300 PSI maximum for compressor hoses and air tools
Cons
- 1/4 inch only, with no other sizes in the box
- Iron bodies, not brass, except the hex coupler and nipple
- No tube cutter or air line in the box
- No push-to-connect fittings for tube
Air fitting size chart
Find the thread size on the port and the tube size on the line, then read across to the kits that include them.
| Size | Fitting type | Kits in this guide |
|---|---|---|
| 5/32 inch | DOT push and NPT | CheeMuii 136-Pc Kit |
| 1/8 inch | DOT push and NPT | CheeMuii 136-Pc Kit, CheeMuii 260-Pc Kit, Ailbiuko 200-Pc Kit |
| 1/4 inch | NPT, DOT push and quick-connect coupler | All 4 kits |
| 3/8 inch | DOT push and NPT | CheeMuii 136-Pc Kit, CheeMuii 260-Pc Kit, Ailbiuko 200-Pc Kit |
| 1/2 inch | DOT push and NPT | CheeMuii 136-Pc Kit, CheeMuii 260-Pc Kit, Ailbiuko 200-Pc Kit |
Read NPT threads first
NPT threads screw into threaded ports on compressors and regulators. The CheeMuii 136-piece kit (on Amazon) uses NPT male threads with pre-applied sealant, and each kit in this guide includes Teflon tape: 1 roll in the 136-piece kit, 2 rolls in the 260-piece kit, 1 roll of 4M tape in the 200-piece kit and 1 roll in the 45-piece kit. The 45-piece Ailbiuko kit is 1/4 inch NPT throughout, so it suits a compressor hose that already ends in a 1/4 inch coupler.
Match push-to-connect fittings to tube size
Push-to-connect fittings grip the outside of the tube, so the fitting size must match the tube size: a 1/4 inch fitting takes a 1/4 inch tube. The CheeMuii kits cover 5/32, 1/8, 1/4, 3/8 and 1/2 inch tubes, and the Ailbiuko 200-piece kit covers 1/8, 1/4, 3/8 and 1/2 inch tubes. Push the tube firmly into the fitting to seal it; the release ring at the top is the part that frees the tube. The 200-piece kit suits PU, PA, PE and PVC tubes. Schrader valves in the CheeMuii kits are 1/4 inch with a 3/4 inch thread length for air spring suspension bags.
Pressure and temperature limits
Check the pressure and temperature ratings before the line goes into service. The CheeMuii 136-piece kit runs from vacuum to 800 PSI and from -40 degrees Fahrenheit to +248 degrees Fahrenheit. The CheeMuii 260-piece (on Amazon) kit rates its air lines from vacuum to 500/800 PSI. The Ailbiuko 45-piece kit lists a maximum pressure of 300 PSI, and the Ailbiuko 200-piece kit runs from vacuum to 145 PSI with proof pressure at 1.32 MPa. The CheeMuii kits and the Ailbiuko 200-piece kit note to see the tubing maker’s recommendations for pressure and temperature limits.
Fitting kits for air assist and compressors
The kits below cover the sizes in the chart above, so pick the kit that holds the thread and tube sizes the air assist line needs.
FAQ: lasers and CNC
What size air fitting do I need for air assist?
Match the NPT thread to the port and the push-to-connect bore to the tube size. The kits cover 1/8, 1/4, 3/8 and 1/2 inch sizes, with 5/32 inch in the CheeMuii 136-piece kit. The Ailbiuko 45-piece kit covers 1/4 inch only.
What is the difference between NPT and push-to-connect fittings?
An NPT fitting screws into a threaded port, with sealant or Teflon tape on the male thread. A push-to-connect fitting grips the tube when the tube is pushed in, and the release ring frees the tube for removal.
Can I use DOT air fittings for a laser air assist line?
The CheeMuii kits meet DOT FMVSS 571.106 and SAE J1131 requirements. The 136-piece kit is rated from vacuum to 800 PSI, and the 260-piece kit rates its air lines from vacuum to 500/800 PSI, which covers air assist and compressor lines. Check the tubing maker’s pressure and temperature recommendations before use.
What pressure can these fitting kits handle?
The CheeMuii 136-piece kit is rated from vacuum to 800 PSI, and the 260-piece kit rates its air lines at 500/800 PSI. The 45-piece kit lists a maximum of 300 PSI, and the 200-piece kit runs from vacuum to 145 PSI with proof pressure at 1.32 MPa.
Do the kits include a tube cutter?
The CheeMuii 136-piece kit includes 1 tube cutter, the 260-piece kit includes 2 tube cutters, and the Ailbiuko 200-piece kit includes 1 tubing cutter. The Ailbiuko 45-piece kit has no cutter in the box; it includes 1 Teflon tape roll.
Related: the laser accessories hub, best air assist hose and best laser air assist. Also see our aquarium pump vs air compressor for laser.




