Ortur Laser Master 3 vs Xtool M1: Which One Should You Buy?
A laser module and exhaust filter pads stand in for both sides here, separating upgrade power from exhaust upkeep on the machines compared.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Ortur Laser Master 2 Pro S2 10000mW Laser Engraver9.7/10View on Amazon - 2
xTool S1 40W Laser Cutter and Laser Engraver for Tumblers9.7/10View on Amazon - 3
ORTUR Laser Master 2 S2 LU2-10A Laser Engraver Laser9.6/10View on Amazon - 4
xTool M1 Ultra Riser Base with Honeycomb PanelView on Amazon - 5
xTool RA3 World's First Smart MagSwap Rotary for xTool P3View on Amazon - 6
ORTUR Laser Master 3 with Foldable FeetView on Amazon - 7
xTool M2 40W Color Craft Laser Engraver and CutterView on Amazon - 8
xTool P2 Honeycomb Working Panel 2.0View on Amazon - 9
xTool SafetyPro AP2 Smoke Purifier for Laser EngraverView on Amazon
A maker choosing between shop setups wants to know which side fits the projects on the bench, from signs and tumblers to leather patches and cut parts, and ortur laser master 3 vs xtool m1 is the comparison that frames that choice. The listings behind this comparison are not complete machines, so this article compares what each listing actually offers: laser power on the Ortur side and exhaust upkeep on the xTool side, and says plainly where the listings leave a machine comparison unclear.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: Pick the Ortur side for laser power on a compatible Ortur machine, since the Ortur example is a laser module with a stated cutting claim. Pick the xTool side for exhaust upkeep on an M1 Ultra fan, since the xTool example is replacement filter pads. Neither listing is a complete machine, so a buyer comparing complete machines should check the machine listings before deciding.
Machines on the list
ORTUR LU2-10A Laser Module for Laser Master 2 Pro
A laser module for Ortur engravers with a stated cutting claim, for a maker who wants more power on an existing Ortur machine.
Pros
- 10000mW laser head with an assist nozzle, per the listing
- Stated cutting of 20mm wooden boards and 30mm acrylic sheets
- Compatible with Laser Master 3, per the listing, plus other Laser Master 2 models
- Dual fan cooling and a built-in air-assist interface, per the listing
Cons
- A module only, not a complete machine
- Laser Class 4, so eye and fire precautions apply
- Needs LightBurn or LaserGRBL for speed setting, per the listing
- No work area is stated on the listing
12pcs Filter Pads Compatible with Xtool M1 Ultra
Replacement filter pads for an xTool M1 Ultra exhaust fan, for an owner of an M1 Ultra exhaust fan replacing clogged pads.
Pros
- 12-pack, so replacements are on hand
- 420-gram heavy-duty, densely woven non-woven fabric, per the listing
- Dual-layer filtration: outer catches large debris, inner blocks fine particles
- Direct replacement for clogged filter pads, per the listing
Cons
- Filter pads only, not a machine or a laser
- No laser power, work area or laser class is stated
- The listing says to confirm the model before purchase
- No warranty term is stated on the listing
Other machines to compare
xTool M1 Ultra Riser Base with Honeycomb PanelCheck price on Amazon
xTool RA3 World's First Smart MagSwap Rotary for xTool P3Check price on Amazon
ORTUR Laser Master 3 with Foldable FeetCheck price on Amazon
xTool M2 40W Color Craft Laser Engraver and CutterCheck price on Amazon
xTool P2 Honeycomb Working Panel 2.0Check price on Amazon
xTool SafetyPro AP2 Smoke Purifier for Laser EngraverCheck price on Amazon
Ortur laser master 3 vs xtool m1 side by side
| Spec | Ortur example | xTool example | Notes |
|---|---|---|---|
| HQ Score | 71 | 53 | Ortur example higher |
| Laser | 10000mW diode module | Not stated | Only the Ortur example states a laser |
| Cutting | 20mm wood, 30mm acrylic (stated) | Not stated | Only the Ortur example states cutting |
| Spot | 0.05*0.1mm compressed spot | Not stated | Only the Ortur example states a spot size |
| Weight | 235g body | Not stated | Only the Ortur example states a weight |
| Pack | Not stated | 12-pack | Only the xTool example states a pack count |
| Software | LightBurn, LaserGRBL | Not stated | Only the Ortur example names software |
| Warranty | 1 year | Not stated | Only the Ortur example states a warranty |
| Laser class | Class 4 | Not stated | Only the Ortur example states a class |
| Air and filtration | Built-in air-assist interface | Dual-layer filtration, 420-gram fabric | Each listing serves a different job |
Specifications are manufacturer rated, as published on each listing and collected 2 November 2026.
Laser power and cutting
The Ortur example is a 10000mW diode module with dual-compression diode technology, per the listing, and the listing states cutting of 20mm wooden boards and 30mm acrylic sheets. The listing gives the spot as a 0.05*0.1mm compressed square spot and says the engraving process is more refined, especially for portraits. The xTool example states no laser power, no spot size and no cutting claim, since it is filter pads rather than a laser, so power cannot be compared across both listings from the data given.
Materials
The Ortur example lists acrylic, metal, wood, stainless steel, glass, ceramics, cylinders, leather, food, paper and fabric as materials for creativity, per the listing. The xTool example lists no engraving materials, since its job is trapping engraving dust in an exhaust fan, not marking a workpiece. Neither listing suggests lasering PVC or vinyl, and that material should never be lasered.
Software and workflow
The Ortur example sets speed through LightBurn or LaserGRBL, per the listing, and pairs a dual fan cooling design with a 24V electric system, and the listing says its cables and wire-protecting chains ensure 24 hours of uninterrupted operation. The module body is 235g, per the listing. The xTool example has no software step: the listing describes a direct replacement for clogged filter pads and says to confirm the model before purchase.
Ventilation and upkeep
The xTool example is built for ventilation upkeep: a dual-layer design with an outer layer catching large debris and an inner layer blocking fine particles, made from 420-gram heavy-duty, densely woven non-woven fabric, per the listing. The listing says the 12-pack saves money on replacements and repairs, and that the high-capacity filter media helps prolong exhaust fan lifespan. The Ortur example contributes a built-in air-assist interface designed for cutting, per the listing, rather than a filter. For more on clearing smoke, see the fume extractor guide.
Safety
The Ortur example is Laser Class 4, per the listing, which means the beam itself carries the higher hazard class and the module is not enclosed protection on its own. The xTool example states no laser class and offers no eye protection, since it is a fan filter, not safety gear. Rated eyewear must match the machine wavelength, and the Ortur listing states no wavelength, so that match cannot be checked from the listing.
Warranty and support
The Ortur example lists a 1 year warranty in its spec table. The xTool example states no warranty term. Support details beyond those points are not stated on either listing.
Choose the Ortur side if
- A compatible Ortur machine needs a stronger cutting module.
- Cutting 20mm wooden boards and 30mm acrylic sheets, as stated, covers the planned work.
- LightBurn or LaserGRBL is already part of the workflow.
Choose the xTool side if
- An M1 Ultra exhaust fan needs fresh filter pads.
- A 12-pack for repeated replacements fits the shop routine.
- Only exhaust upkeep is needed, with no new laser purchase planned.
Stay with the machine while it runs, keep a fire extinguisher nearby, ventilate, and never laser PVC or vinyl. A Class 4 module needs rated eyewear and a controlled workspace; the listing states no wavelength, so check the maker documentation before use.
Project Match
- Cutting wooden boards and acrylic sheets: Ortur example, with stated 20mm wood and 30mm acrylic cutting.
- Engraving glass, ceramics, leather, metal, fabric, paper and food: Ortur example, per its materials list.
- Portrait engraving with a fine spot: Ortur example, with a stated 0.05*0.1mm compressed spot.
- Keeping an M1 Ultra exhaust fan running: xTool example, as direct replacement filter pads.
FAQ: lasers and CNC
Can the Ortur example cut wood and acrylic?
The listing states cutting of 20mm wooden boards and 30mm acrylic sheets.
Does the xTool example fit the base M1?
The listing names the M1 Ultra exhaust fan and says to confirm the model before purchase, so fit for the base M1 is not stated.
Is either listing a complete machine?
Neither listing is a complete machine: the Ortur listing is a laser module and the xTool listing is filter pads.
What software does the Ortur example use for speed?
The listing says to set speed through LightBurn or LaserGRBL.
Related: Longer Ray5 vs Ortur Laser Master 3, xTool M1 vs M2, honeycomb bed for xTool M1 and how to choose a laser engraver.
