Longer Ray5 vs Ortur Laser Master 3: Which One Should You Buy?

Side by side

Specifications are manufacturer rated, as published on each listing and collected 1 November 2026.

Longer Ray5 vs Ortur Laser Master 3: Laser Power and Cutting

The Ortur listing states a 10W module, written as 10000mW in its title, while the Longer listing states a 5W output. The Ortur listing also states cut depths of 30mm acrylic and 20mm wood, with a built-in air-assist interface designed for cutting. The Longer listing gives no cut depth for acrylic or wood, so its cutting limits stay unstated.

Rated speed runs the other way: the Longer listing states up to 24,000mm/min, against 15,000mm/min on the Ortur listing. Speed alone does not decide a cut, and neither listing states a pass count.

Workspace and Precision

The Longer listing states a working area of 15.75″x15.75″, while the Ortur listing states an engraving area of 390*410mm. The listings state the area in different units, so a direct size claim is not stated in the listing data. Plan the largest piece from the figure in the unit its own listing uses.

Precision figures also differ in form. The Longer listing states a spot size of 0.08*0.08mm and an accuracy of 0.01mm. The Ortur listing states a compressed point of 0.05mm x 0.1mm. The listings do not support a single finer-beam claim.

Materials

The Longer listing names wood, acrylic and leather for DIY engraving. The Ortur listing title names wood and metal, acrylic, glass and leather, but its bullets give cut depths only for acrylic and wood, with no metal cutting depth stated. Never laser PVC or vinyl with either machine. For a wider look at what diode lasers cut and engrave, see the diode vs CO2 guide.

Software and Connections

Both listings name LaserGRBL and LightBurn as compatible software. The Longer listing adds 4 connection modes, USB, TF Card, WiFi and APP, with offline operation, plus a 3.5-inch color touch screen. The Ortur listing names its own app with simple or professional mode selection, and compatibility with Win 7, Win 8, XP, Win 10 and Win 11, plus MAC system support through LightBurn.

Safety and Enclosure

Both machines are open-frame designs. The Longer listing includes a protective cover and protective glasses, with move protection that shuts the machine down on abnormal shaking and thermal protection that stops the machine if it detects a flame or overheating in the engraving area. The Ortur listing states Class 4, with 4 safety features, an emergency stop switch, a flame alarm, active position protection, a stop when the USB cable is disconnected, and exposure time detection and limitation. Its cover is stated to filter out 98% UV light.

Neither listing states an OD rating or a wavelength range for its glasses or cover.

Ventilation and Workshop Setup

Engraving and cutting make smoke, so ventilation belongs in the setup plan for either machine. The Ortur listing includes a built-in air-assist interface for cutting, but air assist is not a substitute for ventilation. The Longer listing states no air-assist feature. For filter options, see the fume extractor guide.

Assembly also differs in what the listings state. The Ortur listing states assembly in about 10-15 minutes, with a full metal structure and modular design for repair and part replacement. The Longer listing describes easy assembly, but states no assembly time. The Longer listing states lifetime technical support and 24-hour customer service, while the Ortur listing states a 1 Year Manufacturer warranty term.

Choose the Ortur listing if

• You want the higher optical output, at 10W against 5W on the Longer listing.
• You want stated cut depths of 30mm acrylic and 20mm wood.
• You want a stated warranty term of 1 Year Manufacturer.

Choose the Longer listing if

• You want the higher rated speed, at 24,000mm/min against 15,000mm/min on the Ortur listing.
• You want USB, TF Card, WiFi and APP connections with offline operation.
• You want on-machine control through a 3.5-inch color touch screen.

Project Match

Match the project list to the listing that states it.

• Signs and leather patches in wood, acrylic or leather: either listing names those materials.
• Cut parts in acrylic or wood where depth matters: the Ortur listing, with stated cuts of 30mm acrylic and 20mm wood.
• Engraving runs without a permanent computer link: the Longer listing, with offline operation and 4 connection modes.
• Work that needs a stated warranty term: the Ortur listing, with 1 Year Manufacturer stated.
• Metal marking: Not stated as a cut depth on either listing; check the Ortur title list before planning metal work.

FAQ: lasers and CNC

Which listing has more laser power?

The Ortur listing states a 10W module, written as 10000mW in its title, while the Longer listing states a 5W output.

Which listing is faster on rated speed?

The Longer listing states up to 24,000mm/min, against 15,000mm/min on the Ortur listing. Neither listing states a pass count.

Is the Ortur listing really the Laser Master 3?

The Ortur listing title names the Laser Master 2 Pro S2, with model Ortur-LaserMaster2-ProS2 in its spec table. The article focus names the Laser Master 3, so confirm the exact model name on the listing before ordering.

Can either laser cut metal?

Neither listing states a metal cutting depth. The Ortur title names metal among its materials, but its bullets give cut depths only for acrylic and wood.

Which listing suits a beginner workbench?

See the best laser engraver for beginners guide alongside this comparison. The Longer listing adds a touch screen and offline operation, while the Ortur listing adds a stated assembly time of about 10-15 minutes and a modular full metal structure.

Related: how to choose a laser engraver, best laser engraver for beginners and best enclosed laser engraver.