60w vs 80w Diode Laser: Which One Should You Buy?
A guide to the 60w vs 80w diode laser question, built from 2 60W listings: cut depth, speed, safety class, warranty and what an 80W listing must state.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CREALITY FALCON A1 White 10W Laser Engraver9.6/10View on Amazon - 2
Creality Falcon A1 10W Laser Engraver9.6/10View on Amazon - 3
SCULPFUN iCube Ultra Dual 1.2W IR & 12W Diode Dual Laser9.4/10View on Amazon - 4
Creality Falcon2 Pro 60W Laser Engraver-Desktop DiodeView on Amazon - 5
Creality Falcon2 Pro 60W Diode Laser Engraver with 4W IRView on Amazon - 6
xTool F2 Ultra Deluxe BundleView on Amazon - 7
Laser Tree Laser Cutter ModuleView on Amazon - 8
Creality Falcon2 Pro 60W + 4W IR Laser Engraver & CutterView on Amazon - 9
LONGER Laser Engraver Ray5 10WView on Amazon
A maker with a stack of basswood blanks and a tumbler order to fill wants to know whether more power is worth the money. The 60w vs 80w diode laser question has a blunt answer from the machines covered here: both are 60W, and no 80W machine is covered here, so this guide compares the 2 60W machines on what their listings state and sets out what an 80W listing must show to earn the step up.
Other machines to compare
Creality Falcon2 Pro 60W Laser Engraver-Desktop DiodeCheck price on Amazon
Creality Falcon2 Pro 60W Diode Laser Engraver with 4W IRCheck price on Amazon
xTool F2 Ultra Deluxe BundleCheck price on Amazon
Laser Tree Laser Cutter ModuleCheck price on Amazon
Creality Falcon2 Pro 60W + 4W IR Laser Engraver & CutterCheck price on Amazon
LONGER Laser Engraver Ray5 10WCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Both machines covered here are 60W diode machines. No 80W machine is covered here, so the 80W side is a checklist of what to look for in a listing, not a review of a machine.
60w vs 80w diode laser: the short answer
Buy 60W if the work is engraving and cutting the materials the listings state: the Creality Falcon2 Pro 60W cuts 22mm basswood and 30mm black acrylic in a single pass, and the LASER TREE K60 cuts 40mm pinewood, 30mm acrylic and 20mm plywood in a single pass. Both are 60W diode machines with air assist, and the Falcon2 Pro suits batch work with its camera and batch positioning. Step up to 80W only when a listing states a higher optical output in watts and deeper single-pass cuts on the same materials, with laser class and warranty stated. For more machines by stated output, see our best laser engraver for small business guide.
What 60W cuts, from the 2 listings
The Falcon2 Pro 60W listing states a single-pass cut through 0.2mm stainless steel, 22mm basswood and 30mm black acrylic, with engraving speeds exceeding 500mm/s. The listing also states an integrated enclosure, a built-in camera, USB connection, intelligent focus and air assist.
The LASER TREE K60 is a module, not a full machine: a 60000mW output diode module with built-in air assist and dual fan cooling, sized at 2.99 by 2.99 by 7.0 inches. Its listing states a single-pass cut through 40mm pinewood, 30mm acrylic and 20mm plywood. Power switches between 60W+, 40W and 20W with a long press of the power button. The listing states compatibility with a range of DIY machines through an adapter board and a sliding bracket, plus a 12 month warranty.
Optical output vs input power
Laser power needs 2 numbers kept apart: optical output, the power that does the cutting, and electrical input, the power the machine draws. The K60 listing states its output plainly as 60000mW, with switchable 60W+, 40W and 20W modes, so the buyer can see the output and the lower engraving modes in the same line.
The Falcon2 Pro listing is less clean: the title states 60W and 240000mW output in the same line, and the bullets state a power of up to 240000mW. The 2 figures do not agree, so ask the seller which figure is right before ordering and do not take the 240000mW figure as the output. A listing that states only input power leaves the buyer guessing; the K60 listing is the clearer of the 2 here because it states 60000mW as output.
Safety class: Class 1 vs Class 4
The Falcon2 Pro 60W is a Class 1 certified machine with an integrated enclosure and 5 safety features stated in the listing: a flame detector, a dual wire limit switch, a safety lock, an emergency stop button and a laser detection cover. The full metal frame and fully enclosed structure, with a fiber cover, isolate smoke, dust and noise during work. A Class 1 enclosed machine suits a small studio, since the beam stays inside.
The K60 is a Class 4 laser module, which is a different shape of risk: an open module that needs an enclosure, eyewear and a ventilated workspace around it. The listing states no enclosure, no eyewear and no interlock, so the buyer supplies the safety around the module. Eyewear protects only if its listing states an optical density and a wavelength range that matches the machine. Ventilate the workspace, or use a filter designed for laser fumes; see our fume extractor guide. Never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS. For guidance on laser products, see the FDA page on laser products.
The gear: 2 60W machines
The Falcon2 Pro 60W ranks first of the 2 machines here. It is a complete enclosed machine with a camera, air assist, intelligent focus and batch positioning, a stated weight of 41.9 pounds and dimensions of 26.0 by 22.0 by 13.0 inches, shipped 80% assembled. Its listing states a Class 1 certification and the 5 safety features above. The warranty field reads only 1, with no term stated, so ask the seller for the term in writing. The 240000mW figure disagrees with the 60W figure in the same title, which costs it points. For wood work at this power, see our best laser engraver for wood picks.
The LASER TREE K60 ranks second. It is a module for an existing machine, not a complete engraver, with switchable 60W+, 40W and 20W power, built-in air assist, dual fan cooling and a stated 12 month warranty. Its spec table lists the size as LT-K60 and the model as LT-K1 MINI, a contradiction to settle with the seller. As a Class 4 module it needs an enclosure and eyewear the listing does not include, which is why it ranks behind the enclosed machine here.
What to check before stepping up to 80W
An 80W listing earns the step up only when it states the figures below in writing.
- Optical output in watts: the listing should state the output as watts, not only input power. The K60 listing states 60000mW as output; the Falcon2 Pro listing states 60W and 240000mW in the title, which disagree.
- Single-pass cut depth with material: the listing should state the depth and the material, as the 2 listings here do.
- Work area: the listing should state the bed size in mm and inches. Neither listing here states a work area, so check it with the seller.
- Laser class and safety features: the listing should state the class and the features, as the Falcon2 Pro listing does.
- Warranty term: the listing should state the term in months or years. The K60 listing states a 12 month warranty; the Falcon2 Pro warranty field reads only 1.
Common mistakes to avoid
- Buying on watts alone without checking optical output vs input power.
- Ordering a Class 4 module and forgetting the enclosure, eyewear and ventilation it needs.
- Lasering PVC, vinyl, PVC-based faux leather, polycarbonate or ABS.
- Trusting a single-pass cut figure without checking which material it names.
- Skipping the warranty term: the Falcon2 Pro warranty field reads only 1, so ask the seller for the term.
The short version
- Both machines covered here are 60W diode machines; no 80W machine is covered here.
- Compare optical output in watts, single-pass cut depth with material, work area, laser class and warranty term.
- Pick the enclosed Class 1 machine for a small studio, and the switchable module for an existing machine.
- Ventilate the workspace, wear rated eyewear and never laser PVC, vinyl, polycarbonate or ABS.
- Ask the seller to confirm any unclear figure, including the Falcon2 Pro 240000mW line and the K60 model name.
FAQ: lasers and CNC
Can a 60W diode laser cut wood?
Yes, within the depths the listings state. The Falcon2 Pro 60W listing states a single-pass cut through 22mm basswood, and the K60 listing states a single-pass cut through 40mm pinewood and 20mm plywood. Check the listing for the material you cut.
What is the difference between 60W and 80W diode lasers?
Optical output is the headline difference: a higher output generally cuts deeper in a single pass on the same material, all else equal. No 80W machine is covered here, so compare the 80W listing’s stated output, cut depth, work area, laser class and warranty term against the 60W figures in this guide.
Is a Class 1 or Class 4 laser safer?
A Class 1 enclosed machine keeps the beam inside the enclosure, as the Falcon2 Pro 60W listing states with its integrated enclosure and 5 safety features. A Class 4 module such as the K60 needs those supplied by the buyer. Eyewear protects only if its listing states an optical density and a wavelength range that matches the machine.
Can I engrave metal with a 60W diode laser?
The Falcon2 Pro 60W listing states a single-pass cut through 0.2mm stainless steel. For bare metal marking, a fiber laser is the usual fit; see our best laser engraver for metal picks.
Do I need air assist?
Both machines covered here include air assist: the Falcon2 Pro 60W lists air assist with its camera and intelligent focus, and the K60 lists built-in air assist with dual fan cooling. Check that the listing states it.
Related: the laser engraver hub, diode laser engravers, best laser engraver for small business and best laser engraver for wood. Also see our how to choose a laser engraver. Also see our best laser engraver for beginners. Also see our best laser engraver for tumblers. Also see our best laser safety glasses for diode lasers. Also see our diode vs co2 laser for wood.




