13×19 vs 8.5×11 Sublimation Printer: Which One Should You Buy?
Two print sizes for sublimation makers, compared through three paper listings: sheet size, paper weight, transfer rate and the surfaces each one covers.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
HTVRONT Sublimation Paper 13x19 inches9.6/10View on Amazon - 2
A-SUB Sublimation Paper 8.5x11 Inch, 105gsm9.6/10View on Amazon - 3
A-SUB Sublimation Paper 8.5x11 Inch, 125gsm9.6/10View on Amazon
You have a design ready for shirts, mugs or tumblers, and the next choice is how large you want to print it. The 13×19 vs 8.5×11 sublimation printer question comes down to sheet size: the wider sheet fits larger transfers, while the smaller sheet covers the everyday blanks most makers press. Three sublimation paper listings show what each size does well: one 13×19 paper and two 8.5×11 papers.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick the 13×19 side if you print larger designs for shirts, canvas bags and bigger blanks; pick the 8.5×11 side if you press mugs, tumblers and small gifts, where the smaller sheet wastes less paper. Among the listings, the HTVRONT 13×19 paper leads on sheet size with a 150-sheet pack, while the A-SUB 105gsm paper is the strongest 8.5×11 pick on transfer rate and pack size.
Machines on the list

HTVRONT Sublimation Paper 13x19 inches
A 13x19 sublimation paper in a 150-sheet pack at 120gsm, with an over 98% transfer rate, fast drying and ink saving performance.
Pros
- 13x19 sheet size for larger transfers such as shirts and canvas bags
- Over 98% transfer rate with fast drying and ink saving performance
- 120gsm paper that the listing says withstands repeated washes, high temperature and sunshine
- 150 sheets per pack for larger runs
Cons
- Only works with sublimation ink and light-colored polyester or coated items
- Cotton content must be 30% or less, so plain cotton shirts are out
- No warranty term is stated

A-SUB Sublimation Paper 8.5x11 Inch, 105gsm
An 8.5x11 sublimation paper in a 150-sheet pack at 105gsm, with an over 98% transfer rate and instant drying.
Pros
- Over 98% transfer rate with instant drying and less ink consumption
- 150 sheets per pack at 105gsm, the lower-weight paper of the two A-SUB listings
- Imported raw materials from Europe, which the listing says keep quality stable
- Covers light-colored polyester fabrics and coated hard objects such as tumblers and mugs
Cons
- No extra silicone paper is included, unlike the 125gsm A-SUB listing
- Only works with sublimation ink
- No warranty term is stated

A-SUB Sublimation Paper 8.5x11 Inch, 125gsm
An 8.5x11 sublimation paper in a 100-sheet pack at 125gsm, with an extra silicone paper included to protect the heat press panel.
Pros
- 125gsm, the highest gsm of the three listings
- An extra silicone paper is included to keep the heat press machine panel clean
- High transfer rate with excellent printing details
- Covers light-colored polyester fabrics and coated hard objects, from shirts to mugs and key chains
Cons
- 100 sheets per pack, the smallest pack of the three listings
- No transfer rate figure is stated, only a high transfer rate
- No drying claim is stated in the listing
- No warranty term is stated
Other machines to compare
Pinckney Cartridge-Free Super-Tank Printer with SublimationCheck price on Amazon
Brother Sublimation PrinterCheck price on Amazon
Pinckney Sublimation Ink Refill for EcoTank Printer ET-2400Check price on Amazon
Sawgrass VersiFlex SG500 PrinterCheck price on Amazon
Sawgrass VersiFlex SG1000 PrinterCheck price on Amazon
Side by side
| Spec | HTVRONT 13×19 Paper | A-SUB 8.5×11 105gsm Paper | A-SUB 8.5×11 125gsm Paper |
|---|---|---|---|
| HQ Score | 59 | 58 | 57 |
| Sheet size | 13×19 | 8.5×11 | 8.5×11 |
| Sheets per pack | 150 sheets | 150 sheets | 100 sheets |
| Paper weight | 120gsm | 105gsm | 125gsm |
| Transfer rate | Over 98% | Over 98% | High transfer rate |
| Drying | Fast drying | Instant dry | Not stated |
| Ink | Sublimation ink | Sublimation ink | Sublimation ink |
| Extra included | Not stated | Not stated | Extra silicone paper |
These numbers come straight from each maker’s listing and are rated, not measured by us (5 November 2026).
13×19 vs 8.5×11 sublimation printer: what the size changes
The size difference is the whole comparison. A 13×19 sheet fits larger designs for shirts, canvas bags and pillows, while an 8.5×11 sheet covers the everyday blanks the listings name: mugs, tumblers, phone cases, puzzles and key chains. The listings on both sides name shirts and mugs, so the size does not decide what you can make; it decides how large each transfer can be.
Paper weight and transfer rate
Paper weight runs from 105gsm to 125gsm across the three listings. The HTVRONT 13×19 paper is 120gsm with an over 98% transfer rate, fast drying and ink saving performance. The A-SUB 105gsm paper also states an over 98% transfer rate, with instant drying and less ink consumption. The A-SUB 125gsm paper states a high transfer rate without a figure, and makes no drying claim, so its case rests on weight: at 125gsm it states the highest gsm of the three listings.
Weight alone does not settle quality: the 105gsm paper states the same over 98% transfer rate as the 120gsm paper, while the 125gsm paper pairs its weight with an extra silicone paper for the press.
Surfaces and materials
All three listings work with light-colored polyester fabrics and coated hard objects, and all three need sublimation ink in an inkjet printer. The HTVRONT listing adds a cotton limit: material with cotton content of 30% or less. The A-SUB listings name light-colored or white polyester fabrics, and the 125gsm listing adds mouse pads to its fabric list.
None of the listings states a warranty term or a safety certification. The silicone paper in the 125gsm pack is the only extra any listing includes, and it protects the heat press machine panel rather than the design.
Choose the 13×19 side if
- You print larger designs for shirts, canvas bags or pillows.
- You want the 150-sheet pack and the over 98% transfer rate in one listing.
- You press bigger blanks the 8.5×11 sheet cannot cover.
Choose the 8.5×11 side if
- You press mugs, tumblers, phone cases and other small blanks.
- You want the 150-sheet pack at 105gsm with an over 98% transfer rate.
- You want the extra silicone paper that comes with the 125gsm pack.
Sublimation work means a hot press and fumes from heated ink and coatings. Keep the press on a stable surface, keep hands clear of the platen, and ventilate the room while you press. Use sublimation ink only, and press only light-colored polyester or coated blanks.
Project Match
- Large shirt and canvas bag transfers: HTVRONT 13×19 Paper, the only 13×19 sheet here.
- Mugs, tumblers and small gifts: A-SUB 8.5×11 105gsm Paper, 150 sheets with an over 98% transfer rate.
- Everyday practice and small blanks: A-SUB 8.5×11 125gsm Paper, with the extra silicone paper for the press.
- Mixed shirt and mug runs: either A-SUB 8.5×11 paper, since both name shirts, mugs and coated blanks.
FAQ: lasers and CNC
Can I use sublimation paper with any inkjet printer?
Only with sublimation ink. All three listings say they work with inkjet printers that use sublimation ink, and the HTVRONT listing states plainly that only sublimation ink works.
What can I press with sublimation paper?
Light-colored polyester fabrics and coated hard objects. The listings name T-shirts, pillow cases, canvas bags, mouse pads, ceramic mugs, phone cases, puzzles, key chains, tumblers and metal plates, and the HTVRONT listing adds that cotton content must be 30% or less.
Which size should I pick for shirts?
Either size presses shirts, since both sides name T-shirts. Pick 13×19 when the design is larger than an 8.5×11 sheet, and 8.5×11 when the design fits the smaller sheet.
What does gsm mean on sublimation paper?
It is the paper weight the listing states: 120gsm on the HTVRONT paper, 125gsm and 105gsm on the two A-SUB papers. A higher gsm means a heavier sheet of the same size, not a better transfer rate on its own.
Do I need anything extra for sublimation printing?
A heat press and sublimation ink. The A-SUB 125gsm pack includes an extra silicone paper for the press panel.
Related: sublimation paper vs heat transfer paper, best sublimation printer for mugs, DTF printer vs sublimation printer and the heat presses and sublimation category.




