Sublimation Tumblers for Beginners: Where to Start
A beginner guide to sublimation tumblers: how the transfer works, which blanks to buy, and the press and oven settings makers state for a first batch.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Kocdam 50 Pack 20oz Sublimation Tumbler Blanks9.6/10View on Amazon - 2
50 Pack Sublimation Tumblers Bulk9.6/10View on Amazon - 3
oaptuza 20 Oz Sublimation Tumblers Bulk Skinny9.6/10View on Amazon - 4
PYD Life 24 Pack Sublimation Tumblers Straight9.5/10View on Amazon
Sublimation tumblers for beginners start with a coated stainless blank, a printed design and heat. The coating on the blank accepts sublimation ink, and heat from a tumbler press or a convection oven bonds the design to the cup, so a plain blank becomes a personalized gift. This guide walks through the blanks, the settings makers state and the pack sizes that suit a new maker.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Kocdam 50 Pack 20oz Sublimation Tumbler Blanks
A 50-pack of 20 oz skinny straight blanks in 304 stainless steel.
Pros
- Stated press and oven settings: 60 seconds at 334 F, 6 minutes at 300 F
- Lids, steel straws, straw brushes, silicone bottoms, shrink wrap sleeves
- Absolutely straight body for an easy full wrap
- 304 stainless steel, rust resistant and easy to clean
Cons
- No hot or cold retention hours are stated
- No sublimation paper in the stated contents
- A 50-pack is a large first order for a small gift run
- No flip straw opening on the push-on lid

50 Pack Sublimation Tumblers Bulk
A 50-pack of 20 oz skinny straight blanks in 304 18/8 stainless steel, with sublimation paper.
Pros
- Stated settings: 330 F for 50 seconds per side, 360 F for 5 to 6 minutes
- Sublimation paper included with the 50-pack
- Completely straight body for a full wrap around the tumbler
- Hot for 5 hours and cold for 12 hours, stated
Cons
- Hot retention of 5 hours, below the oaptuza pack
- Straw material is not stated
- A 50-pack is a large first order for a small gift run
- Individually boxed cups take more shelf space

oaptuza 20 Oz Sublimation Tumblers Bulk Skinny
A 25-pack of 20 oz skinny straight blanks in food-grade 304 stainless steel, with a flip straw lid.
Pros
- Flip straw lid with a portable handle for carrying
- Hot up to 12 hours and cold for 24 hours, the longest retention stated here
- Each cup arrives in an individual box, gift-ready
- Food-grade 304 stainless steel, BPA-free, with a sweat-proof design
Cons
- No sublimation time or temperature is stated
- No sublimation paper in the stated contents
- Flip straw lid and handle add parts to wash
- No warranty term is stated

PYD Life 24 Pack Sublimation Tumblers Straight
A 24-pack of 20 oz skinny straight blanks in 18/8 304 food-grade stainless steel.
Pros
- Completely straight body for a full wrap
- Slide lid and metal straw included with each cup
- Each cup arrives in an individual gift box
- 18/8 304 food grade stainless steel, double walled
Cons
- No sublimation time or temperature is stated for a heat press or an oven
- No retention hours are stated
- The 24-pack is the smallest pack here
- No warranty term is stated
Sublimation tumblers for beginners: what you need first
A sublimation tumbler starts as a blank: a stainless cup with a polymer coating that holds sublimation ink. You print a design on sublimation paper, wrap the paper around the blank, hold it tight, and apply heat. In an oven, shrink wrap holds the paper tight; in a heat press, the press holds the paper. The heat bonds the ink with the coating, so the design becomes part of the cup.
Before you order blanks, check what you already own. A tumbler heat press holds the wrap tight while it heats. A convection oven works too, with oven settings to follow. Our how to make a sublimation tumbler guide walks through the full process.
How to sublimate a tumbler in a heat press or an oven
The blanks that state settings give you a starting point, and the settings differ, so follow the blank you bought. The Kocdam blank (on Amazon) states 60 seconds at 334 F in a heat press, or 6 minutes at 300 F in an oven. The Maucircol blank (on Amazon) states 330 F for 50 seconds per side in a heat press, with a rotate to the other side, or 360 F for 5 to 6 minutes in an oven.
Wrap the printed design around the blank and tape it in place. For the oven, slide on the shrink wrap sleeve; in a heat press, the press holds the wrap. Then press or bake it for the stated time.
The gear: sublimation tumbler blanks for your first batch
The press or oven settings above only work when the blank has a sublimation coating, so the packs below are the coated blanks for the job.
How to pick a pack size
A 50-pack suits a maker pressing gifts for a crowd, while a 24-pack or a 25-pack suits a short run. The Kocdam and Maucircol packs hold 50 blanks each, the oaptuza pack holds 25, and the PYD Life pack holds 24.
Common mistakes to avoid
- Buying a plain tumbler with no sublimation coating.
- Pressing with no time or temperature to follow.
- Skipping the shrink wrap when you bake in an oven.
- Ordering too few blanks for a practice run.
- Handling the hot cup with bare hands.
FAQ: lasers and CNC
What is a sublimation tumbler?
A sublimation tumbler is a stainless cup with a polymer coating that accepts sublimation ink under heat. A plain steel cup without the coating will not hold the print.
Do I need a heat press or an oven for sublimation tumblers?
Either works when you have settings to follow. The Kocdam blank states 60 seconds at 334 F in a press or 6 minutes at 300 F in an oven. The Maucircol blank states 330 F for 50 seconds per side in a press, or 360 F for 5 to 6 minutes in an oven.
What size sublimation tumbler should a beginner buy?
Every blank here is 20 oz, the size every pack shares, and a skinny straight body wraps easily. Our sublimation tumbler size chart shows how the common sizes compare.
How long does a sublimation tumbler keep drinks hot or cold?
The oaptuza pack states hot for up to 12 hours and cold for 24 hours, while the Maucircol pack states hot for 5 hours and cold for 12 hours. The Kocdam and PYD Life packs state no hours.
Related: the craft machines hub, how to make a sublimation tumbler and best laser engraver for tumblers. Also see our can cooler sublimation guide.




