Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How Do You Load Packing Tape Dispenser

Learn how to load a packing tape dispenser: fit the roll on the core, thread the tape to the blade, set the brake and cut a clean strip.

How Do You Load Packing Tape Dispenser
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1GGR Supplies ET-12270 Blue/Grey Premium Steel DeskGGR Supplies ET-12270 Blue/Grey Premium Steel Desk9.7/10View on Amazon
  2. 22 Pack Heavy Duty Packing Tape Dispenser Gun2 Pack Heavy Duty Packing Tape Dispenser Gun9.5/10View on Amazon
  3. 3Duck HD Clear Packing Tape Dispenser Heavy DutyDuck HD Clear Packing Tape Dispenser Heavy Duty9.5/10View on Amazon
  4. 4Uline H-150 2-Inch Hand-Held Industrial SideUline H-150 2-Inch Hand-Held Industrial Side9.3/10View on Amazon

How do you load packing tape dispenser? Start with the roll, the core and the blade: the roll sits on the core holder, the loose end feeds forward to the blade, and the blade trims the tape after the strip is pressed onto the box.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

GGR Supplies ET-12270 Blue/Grey Premium Steel Desk

GGR Supplies ET-12270 Blue/Grey Premium Steel Desk

GGR Supplies9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A steel desktop dispenser for tape up to 3 inches wide on a 3-inch core, with a weighted base and a blade cover.

Pros

  • Holds two 1-inch rolls or one 2-inch roll, up to 3 inches wide on a 3-inch core
  • Supports an outer roll diameter of up to 5 inches
  • Serrated blade cuts tape up to 3 mils thick, with a protective blade cover
  • Weighted rubber-lined base removes for mounting to a surface

Cons

  • Desktop shape: not a handheld gun for sealing cartons on the move
  • At 3.1 lb it stays put on a desk rather than travelling with you
  • No tape roll is stated as included
  • No warranty term is stated
2 Pack Heavy Duty Packing Tape Dispenser Gun

2 Pack Heavy Duty Packing Tape Dispenser Gun

Bonison9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of blue handheld tape guns for tape up to 2 inches wide on a 3-inch core, with a metal frame and a pressure roller.

Pros

  • Two guns in the pack for packing, shipping, moving and storage
  • Fits carton sealing tape up to 2 inches wide on a standard 3-inch core
  • Rigid metal frame with a textured blue handle for a steady grip
  • Pressure roller guides tape across cardboard, and the metal cutting blade gives a controlled cut

Cons

  • Packing tape is not included
  • Fits tape up to 2 inches wide only, so wider tape needs another dispenser
  • Exposed blade needs care: the maker warns to keep fingers away from the blade during use
  • Warranty runs 2 months
Duck HD Clear Packing Tape Dispenser Heavy Duty

Duck HD Clear Packing Tape Dispenser Heavy Duty

Duck9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heavy duty packing tape dispenser with a foam handle and 1 refill roll of HD Clear 1.88 inch tape, 50 yards long, for packing boxes, shipping and moving.

Pros

  • Includes 1 refill roll of HD Clear 1.88 inch tape, 50 yards long
  • Foam handle for grip during packing
  • Tape sticks well in hot or cold temperatures, per the maker
  • Crystal clear tape for a professional look on boxes and address labels

Cons

  • No warranty term stated
  • No cutting blade stated; the listing says the tape cuts with scissors
  • No tension control stated
  • 1.88 inch tape is narrower than the 2 inch tape the other picks take
Uline H-150 2-Inch Hand-Held Industrial Side

Uline H-150 2-Inch Hand-Held Industrial Side

ULINE9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-inch hand-held side-loading tape dispenser with an adjustable brake to control tension.

Pros

  • Side loading for tape changes
  • Adjustable brake to control tension
  • 2-inch hand-held size for carton sealing
  • Sold as a two-pack

Cons

  • Tape is not included
  • Core size is not stated, so check tape fit before ordering
  • Hand-held only, so it does not sit on a desk like a weighted dispenser
  • No warranty term is stated

How do you load packing tape dispenser: the handheld gun

On the Bonison guns, hold the gun by the handle with the open side facing up. Set the roll on the core holder so it turns freely, then pull the loose end forward and feed it under the pressure roller and past the blade. Press the tape onto the box, move the gun across the seam, then tilt the gun to cut.

The Uline H-150 takes tape from the side, and the adjustable brake on the Bonison pair and the Uline H-150 sets the tension so the roll turns with steady resistance.

How to load a desktop tape dispenser

Set the roll on the core holder, then pull the loose end across the serrated blade. The GGR Supplies desktop dispenser takes tape up to 3 inches wide on a 3-inch core, with an outer roll diameter of up to 5 inches. The weighted rubber-lined base holds the dispenser still while you pull, and the base comes off for mounting to a surface. Keep the blade cover over the blade between cuts.

Set the tension and cut cleanly

Tension decides whether the tape feeds smoothly or drags. Start with the brake loose, then tighten it until the tape pulls with steady resistance and stays flat on the box. On the Bonison guns, a pressure roller guides the tape across cardboard as you seal. Cut with a firm tilt of the gun or a steady pull across the desktop blade, then press the cut end down. Keep fingers away from the blade during use.

Dispensers for loading packing tape

The dispensers below handle the loading steps above: the guns carry the roll while you seal cartons, and the desktop dispenser holds the roll at a desk.

FAQ: lasers and CNC

Which way does the tape face when you load a dispenser?

The sticky side faces the box as the tape leaves the roll. On a gun, the loose end feeds forward past the blade, and on the desktop dispenser it pulls across the serrated blade. If the tape curls back, turn the roll around on the core holder and feed it again.

What size tape fits a packing tape dispenser?

The Bonison guns fit tape up to 2 inches wide on a standard 3-inch core, and the Uline H-150 fits 2-inch tape. The GGR Supplies dispenser fits tape up to 3 inches wide on a 3-inch core, and the Duck gun includes a roll of HD Clear 1.88 In. x 50 Yards tape.

Why does the tape keep slipping off the roll?

A loose brake lets the roll spin free, so tighten the adjustable brake until the roll turns with steady resistance. Check that the roll sits flat on the core holder and that the tape feeds forward to the blade.

Can you load a packing tape dispenser without the instructions?

Yes. Fit the roll on the core holder, feed the loose end forward to the blade, pull a short strip onto the box and cut with the blade. If the dispenser has a brake, set it so the roll turns with steady resistance instead of spinning free.

Related: selling and packaging, best packing tape dispenser, best shipping tape dispenser and shipping box sizes.

More buying guides