Hot vs Cold Laminating Machine: Which One Should You Buy?
A hot vs cold laminating machine guide: how heat and cold modes differ, and which of 4 laminators fits documents, photos and heat-sensitive pieces.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Gorilla Mini Hot Glue Gun Kit9.7/10View on Amazon - 2
13 Inch Laminator Machine with 30 Laminating Sheets9.7/10View on Amazon - 3
Crenova Laminator Machine with 10 Laminating Sheets9.4/10View on Amazon - 4
Crenova Laminator Machine with 10 Laminating SheetsView on Amazon - 5
13 Inch Laminator MachineView on Amazon - 6
Chilino 13inch Heavy-Duty 4-Roller 11x17 Laminator MachineView on Amazon - 7
13Inch Laminator Machine with Sheets 50pcsView on Amazon - 8
11 in 1 Laminator Machine 9 Inch with 36 Laminating SheetsView on Amazon - 9
VidaTeco 9-inch Laminator Machine with 20 Laminating SheetsView on Amazon
Choosing between a hot vs cold laminating machine comes down to what goes through it. A hot laminator seals a standard thermal pouch with heat and pressure, which suits everyday documents, photos, menus and certificates. A cold laminator presses a self-adhesive pouch with pressure alone and no heat, which suits receipts, stamps and other pieces that heat could spoil. Heat is the workhorse mode for ordinary paper items, while cold mode earns its place the moment heat-sensitive pieces enter the pile. The sections below explain how each mode works and compare the laminators in this guide.
Other machines to compare
Crenova Laminator Machine with 10 Laminating SheetsCheck price on Amazon
13 Inch Laminator MachineCheck price on Amazon
Chilino 13inch Heavy-Duty 4-Roller 11x17 Laminator MachineCheck price on Amazon
13Inch Laminator Machine with Sheets 50pcsCheck price on Amazon
11 in 1 Laminator Machine 9 Inch with 36 Laminating SheetsCheck price on Amazon
VidaTeco 9-inch Laminator Machine with 20 Laminating SheetsCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Hot vs cold laminating machine: how the two modes work
Hot lamination feeds a document inside a thermal pouch between heated rollers. The heat melts the adhesive inside the pouch and the rollers press it flat, which seals the document in a clear, stiff sleeve. Listings for the models below describe hot mode for diplomas, menus, photos, cards and certificates. Pouch thickness matters: the MAXDONE listing states pouches of 80 to 100 microns, while the Scotch listing states 3 mil and 5 mil pouches.
Cold lamination skips the heat and relies on pressure alone. The pouch is self-adhesive, so the rollers press the sticky layers together around the document with no warm-up wait. The listings describe cold mode for thermal receipts, stamps and invoices, pieces where heat could darken print. Cold mode needs self-adhesive pouches, and the MAXDONE and Crenova listings note that those pouches are not included, so they are a separate purchase.
A machine that offers both modes covers the widest range of jobs. The MAXDONE, Crenova and Qfun models in this guide all state hot and cold modes, while the Scotch TL906 states thermal lamination only. That split is the first filter: standard documents and photos suit a thermal-only machine, while heat-sensitive pieces call for a model with a stated cold mode.
The 4 laminators compared
Each model below is ranked by its stated specs: entry width, warm-up time, laminating speed, included sheets and warranty term.
| Laminator | Entry width | Warm-up | Laminating speed | Sheets included | Warranty |
|---|---|---|---|---|---|
| Qfun 13-Inch Thermal and Cold Laminator | 13 inch | 60 seconds | Not stated | 12 | 2 year |
| Crenova Laminator Machine | 13 inch | 70 seconds | 355 mm/min | 12 | 12-month warranty |
| MAXDONE 9 Inch Laminator Machine | 9 inch | 90 seconds | 320 mm/min | 20 | 2 Year |
| Scotch PRO TL906 Thermal Laminator | 9 inch | 5 to 6 minutes | 15 in. per minute | 2 | Not stated |
Speeds are listed as each maker states them, in millimeter-per-minute or inches-per-minute figures. Warm-up times run from 60 seconds to 5 to 6 minutes across the 4 models.
Qfun 13-Inch Thermal and Cold Laminator
Ranked 1, the Qfun takes the widest entry in this set at 13 inch and accepts sheets up to 11 x 17 inches, with a stated warm-up of 60 seconds. The kit is a 9-in-1 set: the machine with storage, a paper cutter, a corner rounder, a hole puncher, 3 binder rings, a user manual and 12 sheets of 3 mil film in 3 A3, 3 A4, 3 A5 and 3 A6 sizes. The listing states a 2 roller system with NTC control, an anti-jam design, an automatic shut-off function and a 2 year warranty. Hot and cold modes are both stated, and the machine takes 3 and 5 mil sheets. One wrinkle: the kit is sold as 9-in-1 while the spec table lists 10 items. For a home office or classroom that laminates mixed sizes, this is the most complete kit.
Crenova Laminator Machine
Ranked 2, the Crenova also offers a 13 inch entry and combines it with a stated speed of 355 mm/min, and a warm-up of 70 seconds. The kit includes 12 thermal sheets in 3 A3, 3 A4, 3 A5 and 3 A6 sizes, a built-in paper cutter and a corner rounder, and the listing states an upgraded dual-roller system, an ABS lever for clearing jams and noise of no more than 55 dB. Hot mode covers photos, menus, cards and certificates; cold mode covers stamps and invoices with self-adhesive pouches that are not included. The warranty term is 12 months. One wrinkle: the bullets call the machine an Assark laminator while the title and brand name say Crenova. For wide-format work, this is the strongest alternative to the Qfun.
MAXDONE 9 Inch Laminator Machine
Ranked 3, the MAXDONE is a 9 inch machine that trades entry width for quiet running and a generous starter pack. Warm-up takes 90 seconds, laminating runs at 320 mm/min, and the listing states noise of 30 dB. The kit holds 20 sheets in 2 A4, 3 A5 and 15 A6 sizes plus a paper cutter, and the machine takes pouches of 80 to 100 microns. A dual roller system with NTC temperature control guards against overheating, and an ABS button releases jams. Hot mode seals standard pouches for diplomas, menus and photos, while cold mode takes self-adhesive pouches that are not included. The warranty term is 2 years. For everyday A4 and smaller work in a quiet space, this is the quietest stated pick of the 4.
Scotch PRO TL906 Thermal Laminator
Ranked 4, the Scotch PRO TL906 is the thermal-only model in this set, with no cold mode stated. It takes pouches up to 9 in. wide, runs 2 heated rollers with 2 temperature settings, and accepts 3 mil and 5 mil pouches. Warm-up takes 5 to 6 minutes, the slowest stated time here, and laminating runs at 15 in. per minute. The box holds the machine and 2 thermal pouches sized 8.5 x 11 inches, so a pouch supply is the first extra purchase. The listing states a weight of 3.23 pounds and dimensions of 15.8 x 4.0 x 3.9 inches, and a limited warranty with no term stated. For a teacher or home office that laminates standard documents and photos and never needs cold mode, the simple 2-setting design still makes sense.
How to choose between hot and cold
Start from the pile, not the machine. If the pile is standard paper, photos, menus and certificates, hot mode does the job. If the pile holds thermal receipts, stamps or invoices, cold mode is required and the Scotch drops out, since its listing states thermal lamination only. Next, check the widest sheet: A4 and smaller fit the 9 inch models, while A3 or 11 x 17 sheets need the 13 inch entry of the Crenova or the Qfun. Then weigh the extras: sheet counts run from 2 to 20 across the 4 models, and cutters, corner rounders and hole punchers vary by kit. Warm-up time matters for quick jobs, with stated times from 60 seconds to 5 to 6 minutes.
Project Match
Typical projects match the picks this way:
- Classroom and office documents: the MAXDONE or the Scotch, both built around A4 and smaller sheets and standard thermal pouches.
- Wide-format sheets: the Qfun or the Crenova, with a 13 inch entry for A3 and 11 x 17 sheets.
- Heat-sensitive pieces: the Qfun, Crenova or MAXDONE in cold mode with self-adhesive pouches; the Scotch states no cold mode.
- Photos, menus and certificates: any of the 4 models in hot mode, with the Qfun and Crenova adding a corner rounder for a finished edge.
- Recipe cards, signs, flyers and artwork: the Scotch in hot mode, or the MAXDONE, which states noise of 30 dB.
FAQ: lasers and CNC
Can a hot laminator also laminate in cold mode?
Only if the listing states a cold mode. The Qfun, Crenova and MAXDONE models here state hot and cold modes, while the Scotch TL906 states thermal lamination only.
What pouches does cold lamination need?
Cold lamination needs self-adhesive pouches, which are pressed together by the rollers with no heat. The MAXDONE and Crenova listings note that self-adhesive pouches are not included, so they are a separate purchase.
What size laminator is needed for A3 paper?
A3 sheets need a 13 inch entry, which the Qfun and Crenova models state. The 9 inch MAXDONE and Scotch models take sheets up to A4 size, with the MAXDONE kit holding A4, A5 and A6 sheets.
How long does a laminator take to warm up?
Stated warm-up times here run from 60 seconds for the Qfun to 5 to 6 minutes for the Scotch, with the Crenova at 70 seconds and the MAXDONE at 90 seconds. Cold mode needs no warm-up, since the rollers press self-adhesive pouches with no heat.
Do these laminators include laminating sheets?
Yes, in different counts: the MAXDONE kit holds 20 sheets, the Crenova and Qfun kits hold 12 sheets each, and the Scotch box holds 2 pouches. Self-adhesive pouches for cold mode are not included with the MAXDONE or the Crenova.
Can thermal receipts be laminated?
Yes, in cold mode, since heat can darken the print on a thermal receipt. The MAXDONE listing names thermal receipts for cold mode, and the Crenova listing names invoices and stamps.
Related: the best craft machine covers, the paper trimmer vs rotary paper cutter guide and the best 5 in 1 heat press picks.




