Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

High Temperature Masking Tape: Uses and Tips

Polyimide rolls for heat work, compared by stated heat range, width and length, with the uses each listing names.

High Temperature Masking Tape: Uses and Tips
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ELEGOO High Temp Tape, 4 Pack Polyimide HighELEGOO High Temp Tape, 4 Pack Polyimide High9.7/10View on Amazon
  2. 2MEBMIK 4 Rolls 20mm x16m(52FT)MEBMIK 4 Rolls 20mm x16m(52FT)9.6/10View on Amazon

The press is hot, the vinyl is placed, and the tape has to hold the transfer still until the heat does its work. High temperature masking tape is the tape that stays put under heat and comes off clean after, and this guide covers what the two packs below state, so the tape matches the job.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

This guide gives only the heat limits the listings state.

ELEGOO High Temp Tape, 4 Pack Polyimide High

ELEGOO High Temp Tape, 4 Pack Polyimide High

ELEGOO9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

4 rolls of polyimide high temperature tape in 1/8, 1/4, 1/2 and 1 in widths, each 108 ft long, rated from -73°C to 260°C.

Pros

  • 4 widths: 1/8, 1/4, 1/2 and 1 in
  • Rated from -73°C to 260°C
  • 432 ft in total across 4 rolls
  • Silicone adhesive releases cleanly after the work cools

Cons

  • No warranty term is stated
  • Delicate or painted finishes need a small-area check first
  • Single-sided only, not a load-bearing fastener
  • Not double-sided thermal tape or a structural adhesive
MEBMIK 4 Rolls 20mm x16m(52FT)

MEBMIK 4 Rolls 20mm x16m(52FT)

MEBMIK9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

4 rolls of polyimide heat transfer tape, 20mm by 16m, rated to 250°C, for heat sublimation press work.

Pros

  • Heat resistance stated at 250°C
  • 4 rolls of 20mm by 16m tape
  • Comes off clean with no residue stated
  • Made for heat sublimation press work

Cons

  • No warranty term is stated
  • Only 20mm width stated, no other widths
  • No thickness is stated
  • Listed for heat sublimation press work, not laser masking

Step 1: Match the tape to the heat

MEBMIK states heat resistance of 250°C. ELEGOO states a range from -73°C to 260°C. Pick the roll whose stated limit covers the heat the job uses, and do not use a tape past its stated limit.

Step 2: Apply it to a clean surface

ELEGOO states to apply the tape to a clean, dry, smooth surface and press firmly for full contact before the heat goes on. MEBMIK states the tape comes off clean with no residue.

Step 3: Peel it after the work cools

ELEGOO states the tape releases cleanly after the work cools. MEBMIK states the tape comes off clean, with easy peel and no residue. Let the work cool before peeling the ELEGOO tape (on Amazon), and check a small area first on delicate or painted finishes, as the ELEGOO listing advises.

High temperature masking tape for the job

The two packs below handle the heat work: MEBMIK for sublimation press vinyl and ELEGOO for masking and insulation around soldering and rework.

Common mistakes to avoid

  • Using a tape past its stated heat limit.
  • Applying tape to a dirty or damp surface: ELEGOO states a clean, dry, smooth surface.
  • Peeling while the work is still hot: ELEGOO states the tape releases cleanly after the work cools.
  • Using single-sided tape as a fastener: ELEGOO states not to use it as a permanent load-bearing fastener.
  • Expecting one width to fit every job: ELEGOO lists 1/8, 1/4, 1/2 and 1 in widths, while MEBMIK lists 20mm only.

High temperature masking tape: the short version

  1. Match the stated heat limit to the job.
  2. Apply the tape to a clean, dry, smooth surface and press firmly, as the ELEGOO listing states.
  3. Let the work cool, then peel, as the ELEGOO listing states.
  4. Check a small area first on delicate or painted finishes.

FAQ: lasers and CNC

What is high temperature masking tape?

Polyimide film tape with a heat resistant adhesive, made to hold under heat and come off clean. MEBMIK states polyimide film tape with a high temperature resistant adhesive, and ELEGOO states HN polyimide film with a silicone adhesive.

How hot can high temperature masking tape get?

MEBMIK states heat resistance of 250°C, and ELEGOO states a range from -73°C to 260°C. Use the stated limit for the roll you buy.

Does high temperature tape leave residue?

MEBMIK states its tape comes off clean with no residue, and ELEGOO states its silicone adhesive releases cleanly after the work cools.

What widths does high temperature tape come in?

ELEGOO lists 1/8, 1/4, 1/2 and 1 in widths, and MEBMIK lists 20mm, 0.78 inch. Pick the width that fits the area to mask.

Can I use high temperature tape on a 3D printer?

ELEGOO states its tape masks selected areas during 3D-printer maintenance. MEBMIK lists heat press sublimation work, not printer work.

Related: the best masking tape for laser engraving, masking tape vs masking paper for laser and best heat transfer vinyl for Cricut. See the engraving materials hub.

More buying guides

Engraving Materials ·

How to Cut Clear Polycarbonate Sheet

Score thin clear polycarbonate sheet with a carbide cutter and snap it along the line, or slice short pieces with a heavy-duty hand cutter.

Engraving Materials ·

How to Clean Leather After Laser Engraving

Clean engraved leather by wiping away loose soot, washing in small sections with a leather cleaner, and finishing with conditioner to restore softness.