Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Class A vs Class B Fire Extinguisher: Which One Should You Buy?

Class A covers wood and paper fires while Class B covers flammable liquids, and an ABC extinguisher covers both plus electrical fires for a laser shop.

Class A vs Class B Fire Extinguisher: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1First Alert Fire ExtinguisherFirst Alert Fire Extinguisher9.8/10View on Amazon
  2. 2First Alert Fire ExtinguisherFirst Alert Fire Extinguisher9.8/10View on Amazon
  3. 3Amerex B500 Fire ExtinguisherAmerex B500 Fire Extinguisher9.8/10View on Amazon

A Class A fire extinguisher is for ordinary combustibles such as wood, paper and cloth, while a Class B extinguisher is for flammable liquids such as solvents and fuel. The class a vs class b fire extinguisher question matters in a laser shop because both kinds of fuel sit near the machine: wood and paper blanks on one side, and finishes, solvents and fuel on the other. For most small laser shops, an ABC dry chemical extinguisher covers Class A, Class B and Class C electrical fires in one unit, so the extinguishers below are all ABC models.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Class A vs Class B fire extinguisher: which one should you buy?

Buy an ABC extinguisher if you run a laser shop. Class A alone leaves flammable liquids uncovered, and Class B alone leaves wood, paper and cloth uncovered. An ABC dry chemical unit covers ordinary combustibles, flammable liquids and energized electrical equipment, which matches the fire types a laser shop can face: a blank catching fire, a solvent spill catching fire, and a fault in the machine wiring.

What Class A covers

Class A covers ordinary combustibles: wood, paper, textiles and trash. In a laser shop that means blanks, offcuts, cardboard packaging and paper patterns. The Kidde listings describe Class A fires as common fires involving wood, paper and textiles, and the Feautte listing adds that its extinguisher is for small, incipient-stage fires only.

What Class B covers

Class B covers flammable liquids and gases. In a laser shop that means solvents, finishes and fuel for any gas tool on the bench. The Kidde Full Home listing names liquids and gases among the fires it stops, and the Kidde Pro 210 is built for flammable liquid fires as well as common and electrical fires. Never use water on a flammable liquid fire: water spreads the burning liquid instead of smothering it.

What Class C adds

Class C covers energized electrical equipment: the machine, its power supply, a charger or a wall outlet that is still live. The Feautte listing states its extinguisher is for Class C energized electrical equipment, and the Kidde listings name electrical equipment among the fires they handle. Once the power is cut, an electrical fire becomes a Class A fire in the wiring and casing, so the ABC unit still applies.

The extinguishers

The models below are all ABC dry chemical extinguishers. They differ in size, discharge time, pressure and warranty, and the table sums up the stated figures before each model gets a closer look.

Model Class Size Discharge time Warranty
Kidde Full Home 3-A:40-B:C 5.5 lb 13-15 seconds 6-year limited
Kidde Pro 210 2-A:10-B:C 4 lb 13-15 seconds Not stated
Feautte FE25 1-A:10-B:C 2.5 lb 10-12 seconds Not stated
OUGIST DJ25 1A:10B:C 2.5 lb Not stated Not stated

Kidde Full Home

The Kidde Full Home is the largest model here at 5.5 lb of dry chemical, with a 3-A:40-B:C class marking, a 6-year limited warranty and a 12-year service free design. It discharges in 13-15 seconds with a range of 12-18 feet, and the listing includes an easy-to-read pressure gauge and a UL-approved plastic wall hanger for mounting. The agent is monoammonium phosphate, the unit measures 4.5 inches by 4.5 inches by 16.8 inches, and the listing notes it is residential, single-use only.

Kidde Pro 210

The Kidde Pro 210 comes as a 2 pack of 4 lb rechargeable extinguishers with a 2-A:10-B:C class marking, built for commercial use. It discharges in 13-15 seconds with a range of 12-18 feet at 100 PSI, with an all-metal valve assembly and an easy pull safety pin. The listing states the unit is rechargeable, which suits a shop that wants the same model mounted in more than one spot.

Feautte FE25

The Feautte is a compact 2.5 lb extinguisher with a 1-A:10-B:C class marking and a 4.5 lb gross weight. It discharges in 10-12 seconds, lists 195 PSI pressure and a -40°F to 120°F range, and prints PASS instructions for aiming from about 6 ft away. The set includes a wall-mount hook, an adhesive location arrow sticker and a monthly inspection record card, and the gauge, safety pin, tamper seal and hose support monthly inspection.

OUGIST DJ25

The OUGIST is a compact 2.5 lb extinguisher with a 1A:10B:C class marking, measuring 4.33 inches by 4.33 inches by 12.5 inches. It has an easy-to-read pressure gauge, a wall hook and a leak-proof build, and the listing describes the PASS method for use. The maker states US patent protection and 24/7 expert support, and the listing gives a production date stamp.

How to pick one for a laser shop

Match the extinguisher to the shop. A larger shop with wood stock and finishing supplies suits the Kidde Full Home, with the highest class marking here at 3-A:40-B:C and a 6-year limited warranty. A shop that wants a spare in another spot suits the Kidde Pro 210 2 pack, since it is rechargeable and built for commercial use. A small bench or a vehicle kit suits the Feautte or the OUGIST at 2.5 lb, with the Feautte adding a stated discharge time of 10-12 seconds and a stated pressure of 195 PSI. Mount the unit where you can reach it without crossing the machine, and read the full label before use.

FAQ: lasers and CNC

Can I use a Class B extinguisher on a wood fire?

A Class B extinguisher is made for flammable liquids, not for wood and paper. Wood, paper and cloth are Class A fires. An ABC extinguisher covers both, which is why the models here all carry an ABC class marking.

What extinguisher should a laser shop keep by the machine?

An ABC dry chemical extinguisher, mounted within reach of the machine and away from the cutting bed. The Kidde Full Home suits a larger shop at 5.5 lb with a 3-A:40-B:C marking, while the Feautte and OUGIST suit a small bench at 2.5 lb.

How far away should I stand when using an extinguisher?

The Feautte listing prints PASS instructions for aiming at the base from about 6 ft away: pull the pin, aim, squeeze the handle and sweep side to side. Read the full label before use.

How long does an extinguisher discharge?

The Kidde models list a discharge time of 13-15 seconds, and the Feautte lists 10-12 seconds. That is a short window, so aim at the base of the fire and sweep side to side.

Do I need a separate extinguisher for electrical fires?

No separate unit is needed if the extinguisher carries a C marking. Class C covers energized electrical equipment, and every ABC model here covers Class A, Class B and Class C in one unit. Cut the power first if you can do so safely.

Related: the laser safety hub, fire extinguisher vs fire suppression system for laser and fume extractor vs exhaust fan for laser engraver. Also see our laser safety glasses vs regular safety glasses.

More buying guides