Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Vinyl Printer and Cutter (2026): 4 Compared

Four vinyl cutters compared by cut width, force, speed, software and warranty, from a 4.5-inch desktop cutter to a 53-inch sign plotter.

Best Vinyl Printer and Cutter (2026): 4 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR 53 in SignmasterBest OverallVEVOR 53 in Signmaster9.6/10View on Amazon
  2. 2USCutter MH100 BundleBest Starter BundleUSCutter MH100 Bundle9.5/10View on Amazon
  3. 3USCutter MH 871 KitBest Value KitUSCutter MH 871 Kit9.4/10View on Amazon
  4. 4LIKCUT S501Compact 4.5 in CutterLIKCUT S5019.4/10View on Amazon

A stack of cut decals, a shop sign and a batch of stickers all start the same way, so the best vinyl printer and cutter is the machine that cuts cleanly at the width your work needs. We compared vinyl cutters by cut width, cutting force, cutting speed, software and warranty, using only what each listing publishes. An honest note up front: every pick here is a cutter, and none of the listings describes a printer, so this guide compares cutters.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall VEVOR 53 in Signmaster: 49.6 in cut width, 10 to 800 mm/s, pressure to 500 g Check price on Amazon
  • Best Starter Bundle USCutter MH100 Bundle: 34 in cutter with stand, software, 7 vinyl rolls, weeding kit Check price on Amazon
  • Best Value Kit USCutter MH 871 Kit: 34 in cutter with stand, software and lifetime phone support Check price on Amazon
  • Compact 4.5 in Cutter LIKCUT S501: 4.5 in sticker and cardstock cutting, compact and portable Check price on Amazon

Machines on the list

VEVOR Vinyl Cutter Plotter Machine

VEVOR Vinyl Cutter Plotter Machine

VEVOR9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 53 in sign plotter with a 49.6 in cut width, Signmaster software, a stepper motor and an LCD control panel.

Pros

  • 49.6 in max cut width, the widest here
  • Cutting force from 10 to 500 g and speed from 10 to 800 mm/s
  • Cutting precision of plus or minus 0.01 mm, per the listing
  • Emergency stop and start, plus a Roland compatible blade holder

Cons

  • No warranty term is stated
  • NOT compatible with the Mac system, per the listing
  • Software delivery method is random: CD or download
USCutter MH100 34" Vinyl Cutter Bundle with Stand

USCutter MH100 34" Vinyl Cutter Bundle with Stand

USCutter9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 34 in vinyl cutter bundle with a stand, software, 7 vinyl rolls and a weeding kit.

Pros

  • Complete starter bundle: stand, software and tools
  • Speed up to 48 in/sec and force up to 350 g
  • 7 GreenStar vinyl rolls in the box
  • VinylMaster Cut included, with Mac via SCAL Pro as an option

Cons

  • No safety feature is stated
  • No cutting precision figure is stated
  • No weight is stated
  • Mac use needs SCAL Pro, listed as optional
USCutter 34 inch MH 871 Vinyl Cutter Kit

USCutter 34 inch MH 871 Vinyl Cutter Kit

USCutter9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 34 in vinyl cutter kit with a stand, Design and Cut software and lifetime phone support.

Pros

  • Two adjustable pinch rollers for a flexible range of materials
  • Ball-bearing dual roller media roller system
  • Roland compatible blade holder
  • Lifetime phone support is stated

Cons

  • No warranty term is stated
  • No cutting force or speed figure is stated
  • No safety feature is stated
  • No system requirements are stated for the software
Likcut S501 Vinyl Cutter Machine

Likcut S501 Vinyl Cutter Machine

LIKCUT9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact and portable vinyl cutter in pink and white with a 4.5 inch cutting width, voice and text design input, over 46 materials and a storage slot for small weeding tools.

Pros

  • Voice and text prompts turn into ready-to-cut designs
  • Cuts over 46 materials, from vinyl to cardstock, iron-on and matless smart material
  • Compact and portable A5 size for small workspaces
  • Includes a pen for drawing and handwritten text, plus metal dies for shapes

Cons

  • Does not offer a print and cut feature
  • Listed for adult use only
  • No warranty term is stated in the listing
  • No cutting accuracy figure is stated in the listing

Other machines to compare

Specs compared

Cutter HQ Score Max Cut Width Cutting Force Cutting Speed Software Warranty
VEVOR 53 in Signmaster 9.6/10 49.6 in 10-500 g 10-800 mm/s Signmaster Not stated
USCutter MH100 Bundle 9.5/10 34 in Up to 350 g Up to 48 in/sec VinylMaster Cut 1 year
USCutter MH 871 Kit 9.4/10 34 in Not stated Not stated Design and Cut Not stated
LIKCUT S501 9.4/10 4.5 in Not stated Not stated Not stated Not stated

Specs are what each manufacturer publishes as its rating on the listing, collected 4 November 2026. Cut width is the widest cut the listing states.

What the listings tell you, and what they leave out

We read four vinyl cutter listings for this guide. Only one states a warranty term, the USCutter MH100 bundle at 1 yr, and only the VEVOR states an emergency stop. None of the four describes a printer: each pick cuts vinyl with a blade, and none prints, so a buyer who needs print-and-cut in one machine will not find it here. Two of the four give a cutting force figure, and two give a cutting speed figure.

Vinyl is a blade-cutter material, not a laser material. Never put vinyl in a laser cutter. The VEVOR listing warns to keep fingers clear of the blade while the machine runs, and the same care applies to every cutter here.

Buying guide: choosing the best vinyl printer and cutter

Cut width

Cut width decides the largest decal or sign you can cut in one pass. The VEVOR cuts up to 49.6 in wide, the two USCutter picks cut 34 in, and the LIKCUT cuts 4.5 in, per the title. Match the width to the largest piece you plan to cut: a shop sign needs the wide plotter, while stickers fit the small cutter.

Force and speed

Cutting force decides how thick a material the blade can cut, and speed decides how fast a long job finishes. The VEVOR lists force from 10 to 500 g and speed from 10 to 800 mm/s, and the MH100 bundle lists force up to 350 g and speed up to 48 in/sec. The MH 871 kit and the LIKCUT state neither figure, so their force and speed cannot be compared from the listings.

Software and connection

The VEVOR runs Signmaster on Windows XP, Vista, 7, 8 and 10, and states it is NOT compatible with the Mac system. The MH100 bundle includes VinylMaster Cut for Windows, with Mac use via SCAL Pro as an option. The MH 871 kit includes Design and Cut software with no system requirements stated. The VEVOR connects by COMPIM and USB and supports DMPL and HPGL, with a 2MB cache for offline cutting.

What a cutter will not do

None of these machines prints, and none of them is a laser: they cut vinyl, paper and card with a blade. Do not put vinyl in a laser cutter. If you need printed decals, see our best vinyl sticker printer and cutter guide. For sign work on a router, see our best cnc router for sign making guide.

Cutter Max cut width Force Speed
VEVOR 53 in 49.6 in 10-500 g 10-800 mm/s
USCutter MH100 34 in Up to 350 g Up to 48 in/sec
USCutter MH 871 34 in Not stated Not stated
LIKCUT S501 4.5 in Not stated Not stated
Safety

Keep fingers clear of the blade while a cutter runs: the VEVOR listing warns not to approach the blade while the machine runs. Vinyl is cut with a blade here, never with a laser, so do not put vinyl in a laser cutter.

Project Match

  • Shop signs and large decals: the VEVOR 53 in cutter, with a 49.6 in cut width and Signmaster software.
  • Starter sign kits: the USCutter MH100 bundle, with a stand, software, 7 vinyl rolls and weeding tools.
  • General signmaking on a stand: the USCutter MH 871 kit, with Design and Cut software and lifetime phone support.
  • Small stickers and cardstock: the LIKCUT S501, at 4.5 in, per the title.
  • Print-and-cut in one machine: Not stated for any pick; none of the listings describes a printer.

How the scores add up

Each machine is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. Only the USCutter MH100 bundle states a warranty term, and only the VEVOR states an emergency stop.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VEVOR 53 in Signmaster 9.6 32 21 20 5 0
USCutter MH100 Bundle 9.5 29 20 21 0 2
USCutter MH 871 Kit 9.4 28 20 19 0 0

HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.

FAQ: lasers and CNC

Do any of these vinyl cutters print?

No. All four are blade cutters, and none of the listings describes a printer. A buyer who needs print-and-cut in one machine will not find it here.

What is the widest cut in this guide?

49.6 in on the VEVOR, against 34 in on the two USCutter picks and 4.5 in on the LIKCUT, per the title.

Can I use a vinyl cutter with a Mac?

The VEVOR states it is NOT compatible with the Mac system. The MH100 bundle includes VinylMaster Cut for Windows, with Mac use via SCAL Pro as an option. The other two listings state no Mac support.

What materials do these cutters cut?

The VEVOR lists sticker and decal vinyl, scrapbook papers, card stock, vinyl lettering, pinstriping and general signage. The MH 871 lists vinyl rolls, transfer tapes and magnetic blanks, and the LIKCUT title states sticker and cardstock cutting. The MH100 bundle states no material list.

Which vinyl cutter states a warranty?

Only the USCutter MH100 bundle, at 1 yr. The other picks state no warranty term.

More laser and CNC guides

Related: the cutting machines hub, craft machines, and the best vinyl cutter with bluetooth guide. Also see our heat transfer vinyl vs adhesive vinyl. Also see our cricut explore 3 vs cricut maker 3. Also see our leather vs vinyl for laser engraving. Also see our best sticker cutting machine for digital printing.

More buying guides

Cutting Machines ·

Best Vinyl Cutter Bundle (2026)

Four vinyl cutter bundles, compared by cutting width, bundle extras, connectivity, software and warranty, for decals, shirts and signs.