Best V Bits for CNC Sign Making (2026)
Five V-groove bits and sets for CNC sign making, compared by angle, shank, tip, coating and material.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGenmitsu 10-Piece Set9.7/10View on Amazon - 2
Best Mixed SetHQMaster 8-Piece Set9.6/10View on Amazon - 3
Best Single BitWhiteside 15409.6/10View on Amazon - 4
FoxAlien Triangular CNC Router Bits V-BitView on Amazon - 5
HQMaster 5pcs CNC Router Bits SetView on Amazon - 6
10pcs CNC Router Bits SetView on Amazon - 7
FoxAlien 10pcs Triangular CNC Router BitsView on Amazon - 8
6Pcs CNC Router Bits SetView on Amazon
A sign maker staring at a blank board wants lettering with crisp edges and clean V-grooves, not fuzzy lines that need sanding. This guide covers the best v bits for cnc sign making for that kind of work, comparing V-groove bits and sets by angle, shank, tip, coating and material, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Genmitsu 10-Piece Set: 10 angles from 10 to 90 degrees with 0.1mm tips and a nano blue coating. Check price on Amazon
- Best Mixed Set HQMaster 8-Piece Set: 8 bits including 30-degree and 60-degree V-groove bits, plus tapered, ball nose and spiral bits. Check price on Amazon
- Best Single Bit Whiteside 1540: Solid carbide 60-degree V-groove bit with a 1/4-inch cutting diameter for crisp lettering. Check price on Amazon
Machines on the list
Genmitsu 10 Pcs 1/8" Shank V-Groove CNC Router
A 10-piece V-groove set with a 1/8-inch shank, angles from 10 to 90 degrees, 0.1mm tips and a nano blue coat.
Pros
- 10 angles from 10 to 90 degrees in one set
- 0.1mm tips for fine lettering, except one 90-degree bit at 0.3mm
- Nano blue coating for hardness and wear resistance
- Works on hardwood, plywood, acrylic, resin, PCB and aluminum
Cons
- No warranty term is stated
- Alloy steel, not solid carbide
- 1/8-inch shank only; needs a 1/8-inch collet
- One 90-degree bit has a wider 0.3mm tip
HQMaster 8 Pcs CNC Router Bits Set 1/4” Shank
An 8-piece tungsten carbide set with a 1/4-inch shank, including 30-degree and 60-degree V-groove bits plus tapered, ball nose and spiral bits.
Pros
- 8 bits including tapered, ball nose, spiral and 30-degree and 60-degree V-groove bits
- Tungsten carbide with nano blue coating
- 1/4-inch shank fits any brand plunge router with a 1/4-inch collet, per the listing
- Covers wood, plywood, chipboard, MDF, plastics and acrylic
Cons
- No warranty term is stated
- Only two V-groove angles: 30 and 60 degrees
- Set mixes bit types, so not every bit is a V-bit
- No tip size is stated for the V-groove bits
Whiteside Router Bits 1540 V-Groove 60-Degree
A solid carbide 60-degree V-groove bit with a 1/4-inch cutting diameter, a 7/32-inch point length and a 1/4-inch shank.
Pros
- Solid carbide for strength and durability
- 60-degree angle for V-shaped grooves, engraved lettering and sign making
- 1/4-inch cutting diameter with a 7/32-inch point length
- Works on natural woods, composite woods and hard plastics
Cons
- No warranty term is stated
- Single bit, not a set
- Single angle: 60 degrees only
- 1.1 pounds
FoxAlien 20/30/45/60/90deg 0.1mm Triangular CNC
A 10-piece set of triangular pyramid V-bits on 1/8 inch shanks covering five carving angles from 20 to 90 degrees with 0.1 mm tips.
Pros
- 10-piece set includes 2 pieces each across five angles from 20 to 90 degrees
- Fine 0.1 mm tip width enables sharp lettering, sign making and 2D or 3D relief carving
- Nano Blue coating strengthens hardness and increases wear resistance in hardwood
- Triangular pyramid profile facilitates chip removal and prevents dust buildup
Cons
- Spec table lists material as Metal while bullets claim ultrafine carbide
- Spec table lists cutting length as 0.1 mm, confusing tip width with cutting depth
- No warranty term stated in the listing
- Delicate 0.1 mm tip can break if run at aggressive plunge rates in dense hardwood
SpeTool V-Groove Carbide Router Bit 90 Deg Chamfer
A 90 degree 2-flute woodworking V-bit with a 1/2 in cutting diameter, welded carbide tips and a 1/4 in shank.
Pros
- Wide 1/2 in cutting diameter with 0.5 in cutting length for fast grooving
- Two-flute design for balanced rotation
- Standard 1/4 in shank fits CNC router collets
- Cost-effective tool for wooden signs and spoilboard chamfering
Cons
- Listing does not state compatibility with any metals (wood only)
- Welded carbide tips rather than solid carbide construction
- Uncoated cutting edges wear rapidly on metal workpieces
- No warranty term is stated in the listing
Other machines to compare
FoxAlien Triangular CNC Router Bits V-BitCheck price on Amazon
HQMaster 5pcs CNC Router Bits SetCheck price on Amazon
10pcs CNC Router Bits SetCheck price on Amazon
FoxAlien 10pcs Triangular CNC Router BitsCheck price on Amazon
6Pcs CNC Router Bits SetCheck price on Amazon
Specs compared
| Bit | HQ Score | Angles | Shank | Tip | Material | Pieces |
|---|---|---|---|---|---|---|
| Genmitsu 10-Piece Set | 9.7/10 | 10, 15, 20, 25, 30, 40, 45, 60, 90 degrees | 1/8 inch | 0.1mm (0.3mm on one 90-degree bit) | Alloy steel, nano blue coat | 10 |
| HQMaster 8-Piece Set | 9.6/10 | 30 and 60 degrees (V-groove) | 1/4 inch | Not stated | Tungsten carbide, nano blue coat | 8 |
| Whiteside 1540 | 9.6/10 | 60 degrees | 1/4 inch | 7/32-inch point length | Solid carbide | 1 |
| FoxAlien V-Bit Set | 9.5/10 | 20, 30, 45, 60, 90 degrees | 1/8 inch | 0.1mm | Nano blue coat | Not stated |
| SpeTool 90-Degree Bit | 9.2/10 | 90 degrees | 1/4 inch | Not stated | Carbide | 1 |
Specifications are manufacturer rated, as published on each listing and collected 9 October 2026.
Best V Bits for CNC Sign Making: What to Check
Angles for sign work
Angle sets the line width: a 60-degree bit suits general lettering, while a set spanning 10 to 90 degrees covers fine detail and bold grooves in one box. The Genmitsu set lists 10, 15, 20, 25, 30, 40, 45, 60 and 90 degree angles, and the FoxAlien set lists 20, 30, 45, 60 and 90 degree angles. For the basics, see CNC bits explained for beginners.
Shank and collet fit
Match the shank to your collet before ordering. The Whiteside, HQMaster and SpeTool bits use a 1/4-inch shank, while the Genmitsu and FoxAlien sets use a 1/8-inch shank. A bit with the wrong shank for your collet cannot run, so check the collet size on your machine first.
Tips, coatings and materials
Tip size decides how fine a line you can carve: the Genmitsu and FoxAlien sets state 0.1mm tips, except one Genmitsu 90-degree bit at 0.3mm. Coating matters for tool life: the Genmitsu, HQMaster and FoxAlien listings name a nano blue coating, while the Whiteside bit is solid carbide with no coating stated. Solid carbide suits heavy use, while alloy steel sets trade some toughness for more angles per box.
Sets versus single bits
Sets cover more angles for varied sign work, while a single bit does one angle well. The HQMaster set mixes V-groove bits with tapered, ball nose and spiral bits, so it suits a maker who also trims and grooves. The Whiteside bit is a single 60-degree bit for makers who want one premium groove. The SpeTool and FoxAlien picks are title-only, so verify their details with the seller before ordering.
Project Match
- Shop signs with bold lettering and fine detail: Genmitsu set, with angles from 10 to 90 degrees and 0.1mm tips.
- Mixed sign and trim work: HQMaster set, with tapered, ball nose and spiral bits alongside V-groove bits.
- One crisp 60-degree groove: Whiteside 1540, solid carbide with a 7/32-inch point length.
- Multi-angle fine engraving: FoxAlien set, with 20, 30, 45, 60 and 90 degree angles and 0.1mm tips.
- Chamfer edges: SpeTool 90-degree bit, with a 1/2-inch cutting diameter.
How the scores add up
Each bit is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. How we pick explains the weights. A spec the listing does not publish scores nothing, and no pick here states a safety feature or a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Genmitsu 10-Piece Set | 9.7 | 32 | 20 | 22 | n/a | 0 |
| HQMaster 8-Piece Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Whiteside 1540 | 9.6 | 29 | 22 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
FAQ: lasers and CNC
What V-bit angle is best for sign lettering?
A 60-degree bit is the common choice for general lettering, and it appears in the Whiteside, Genmitsu, HQMaster and FoxAlien listings. For varied line widths, a set spanning several angles covers more sign styles.
Do I need a 1/4-inch or 1/8-inch shank?
Match your collet: the Whiteside, HQMaster and SpeTool bits use a 1/4-inch shank, while the Genmitsu and FoxAlien sets use a 1/8-inch shank.
What does a 0.1mm tip do?
A 0.1mm tip carves fine detail lines for small lettering and detailed designs. The Genmitsu and FoxAlien sets state 0.1mm tips, except one Genmitsu 90-degree bit at 0.3mm.
Are these bits only for wood?
No. Listings here name hardwood, plywood, MDF, acrylic, plastic fiber, resin, PCB and aluminum across the picks, though each listing names its own set of materials.
Which picks state a warranty?
None of these picks states a warranty term. Check the seller listing for warranty and return terms before ordering.
Related: best spiral router bits for softwood, best engraving bits for wood, best router bit for beginners and the cnc tooling hub.
