Best Thread Pitch Gauge for Us and Metric Threads (2026)
Thread pitch gauge sets for US and metric threads, compared by range, blades, steel, locking and stated use.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGlarks 5-Piece Set9.7/10View on Amazon - 2
Best Compactzikyunw 3-in-1 Gauge9.6/10View on Amazon - 3
Best for Lathe ToolsChgImposs Gauge Set9.6/10View on Amazon - 4
Best US MadePEC 28-Leaf Metric9.5/10View on Amazon
A bolt from a project will not match any nut in the bin, and the threads on a lathe part need a name before the next cut. The best thread pitch gauge for us and metric threads settles that question in seconds: a leaf that matches the thread tells the pitch, and a set that covers metric, Whitworth and US threads handles the fasteners a maker meets most. This guide compares gauge sets from the listings on range, blades, steel, locking and stated use.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Glarks 5-Piece Set: 51 SAE blades, a 52-piece metric, SAE and Whitworth set and 3 center gauges in a plastic box. Check price on Amazon
- Best Compact zikyunw 3-in-1 Gauge: Metric, Whitworth and US threads in one stainless gauge with a rotary locking device. Check price on Amazon
- Best for Lathe Tools ChgImposs Gauge Set: Metric, imperial and US blades with a V-groove for checking the lathe cutting tool angle. Check price on Amazon
- Best US Made PEC 28-Leaf Metric: 28 metric leaves in hardened and tempered steel with stamped markings, made in the USA. Check price on Amazon
Machines on the list

Glarks 5Pcs Stainless Steel Screw Thread Pitch
A 5-piece stainless steel set with 51 SAE blades, a 52-piece metric, SAE and Whitworth set and 3 center gauges, packed in a plastic box.
Pros
- 51 SAE blades plus a 52-piece metric, SAE and Whitworth set and 3 center gauges
- Stainless steel with a chrome finish and anti-rust oil
- Measures internal and external screw threads
- Plastic box for carry and storage
Cons
- No warranty term is stated
- No safety feature is stated
- Five pieces take more storage space than a single compact gauge

Professional Thread Gauge
A 3-in-1 stainless steel gauge covering metric 60 degree, Whitworth 55 degree and US SAE 60 degree threads, with a rotary locking device.
Pros
- Metric, Whitworth and US threads in a single compact gauge
- Stainless steel blades with an anti-rust finish
- Rotary locking mechanism holds the blade during use
- V-groove checks the lathe cutting tool angle
Cons
- No warranty term is stated
- No safety feature is stated
- No blade count is stated for the set
- The US range is stated as 8 to 28 with no blade list

ChgImposs Metric & Imperial & US Screw Gauge SAE
A stainless steel gauge set covering metric, imperial and US threads at 55 and 60 degrees, with a lock-up device and a V-groove.
Pros
- Metric, imperial and US threads in one set
- Stainless steel blades with a wire drawing surface
- Lock-up device holds the blades
- V-groove checks the lathe cutting tool angle
Cons
- No warranty term is stated
- No safety feature is stated
- No blade count is stated for the set

Thread Gauge Standard And Metric
A 52-piece stainless steel metric and imperial gauge set at 60 and 55 degrees, with a chrome finish and a rotary switch.
Pros
- 52 pieces covering metric and imperial threads
- Stainless steel with a chrome finish that resists rust
- Rotary switch adjusts the blades freely
- States a 100% product guarantee
Cons
- No separate US blade list is stated
- The 100% product guarantee states no term, so it scores nothing for warranty
- No safety feature is stated

PEC Tools Screw Pitch Gauge, 0.25–2.50mm Pitch
A 28-leaf metric gauge from 0.25 to 2.50 mm in hardened and tempered steel, with stamped markings and a locking device, made in the USA.
Pros
- 28 leaves from 0.25 to 2.50 mm with stamped markings
- Hardened and tempered steel for long-term stability
- Narrow blades check internal and external threads
- Made in the USA
Cons
- Metric only, so US and Whitworth threads need another gauge
- Range stops at 2.50 mm, so larger metric pitches are not covered
- No warranty term is stated
- No safety feature is stated
Specs compared
| Model | HQ Score | Thread systems | Blades | Steel | Locking | Warranty |
|---|---|---|---|---|---|---|
| Glarks 5-Piece Set | 9.7/10 | SAE, metric, Whitworth | 51 SAE, 52 metric, 3 center gauges | Stainless, chrome finish | Screw adjust | Not stated |
| zikyunw 3-in-1 Gauge | 9.6/10 | Metric, Whitworth, US SAE | 3-in-1 gauge | Stainless, anti-rust finish | Rotary lock | Not stated |
| ChgImposs Gauge Set | 9.6/10 | Metric, imperial, US | 3-system gauge | Stainless, wire drawing | Lock-up device | Not stated |
| Keenso 52-Piece Set | 9.6/10 | Metric, imperial | 52 pieces | Stainless, chrome finish | Rotary switch | 100% product guarantee, no term stated |
| PEC 28-Leaf Metric | 9.5/10 | Metric only | 28 leaves | Hardened and tempered steel | Locking device | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Blade counts are the counts each listing states for its own set.
What the listings tell you, and what they leave out
We read 5 thread pitch gauge listings for this guide. 3 of the 5 cover metric, Whitworth and US threads in one set, one covers metric and imperial, and one covers metric only. 4 state stainless steel blades, and 3 state a locking device. Only one states a made in USA origin, and only one states a plastic storage box.
The listings leave out the blade count for the compact gauges, and 2 list dimension fields that do not add up: the Keenso size fields read 0.0, and the ChgImposs weight field reads a tiny fraction of a pound, far too light for a steel gauge set. Treat those fields as listing errors and judge the gauges on their stated ranges instead.
Buying guide: choosing the best thread pitch gauge for us and metric threads
Metric, Whitworth and US in one set
US threads use a 60 degree profile, metric threads use 60 degrees, and Whitworth threads use 55 degrees. A set that states all 3 systems covers the fasteners on US machines, metric hardware and older British threads without a second gauge. The Glarks, zikyunw and ChgImposs sets state all 3; the Keenso set states metric and imperial; the PEC set states metric only.
Blade range and leaf count
Range matters more than leaf count: a metric range of 0.25 to 6.0 mm and an imperial range of 4G to 62G cover the pitches on common fasteners, and a US range of 8 to 28 covers the coarse and fine US pitches the listings name. The PEC set stops at 2.50 mm, so it suits small metric threads and leaves larger metric pitches to the other sets.
Steel, finish and locking
4 of the 5 sets state stainless steel blades, and the PEC set states hardened and tempered steel. Stainless with a chrome or anti-rust finish resists rust in a shop drawer, and a locking device holds the blade still while the pitch is checked. The zikyunw and PEC sets state a locking device by name, and the ChgImposs set states a lock-up device.
Lathe work and tool angle
2 of the sets state a V-groove for checking the angle on a lathe cutting tool, and the Glarks set adds 3 center gauges for grinding and positioning the tool. If the gauge will check lathe tools as well as threads, those are the sets to look at first.
What a gauge will not do
A pitch gauge matches the pitch; the listings state no diameter range, so a caliper still handles the diameter. Check the pitch range in the listing before ordering, and match the blade to the thread form as well as the pitch.
Project Match
Typical shop jobs and the picks that fit them, from the listings:
- Sorting mixed US and metric fasteners: the Glarks, zikyunw and ChgImposs sets, which state metric, Whitworth and US blades.
- Checking lathe tool angle: the ChgImposs and zikyunw sets, which state a V-groove, and the Glarks set, which adds 3 center gauges.
- Small metric threads only: the PEC set, with 28 leaves from 0.25 to 2.50 mm and narrow blades for internal and external threads.
- A compact gauge for the toolbox: the zikyunw set, at 2.9 by 0.78 by 0.5 in with a rotary lock.
How the scores add up
Each gauge set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. None of the 5 listings states a safety feature, and none states a warranty term with a length, so safety and warranty score zero across the group.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Glarks 5-Piece Set | 9.7 | 32 | 21 | 21 | n/a | 0 |
| zikyunw 3-in-1 Gauge | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ChgImposs Gauge Set | 9.6 | 29 | 20 | 21 | n/a | 0 |
| Keenso 52-Piece Set | 9.6 | 28 | 20 | 20 | n/a | 0 |
| PEC 28-Leaf Metric | 9.5 | 26 | 22 | 19 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What is a thread pitch gauge used for?
It checks the pitch of a screw thread so the thread size can be named, and the listings here also use it to check the angle on a lathe cutting tool. Match a blade to the thread and read the size stamped on the blade.
How do I read the pitch from the gauge?
Press the blades against the thread until one seats cleanly in the grooves, then read the pitch stamped on that blade. The PEC listing states every blade is stamped with its thread size, and the Glarks listing states the numbers are stamped clear for reading.
Do I need separate gauges for US and metric threads?
Not with the 3-system sets here. The Glarks, zikyunw and ChgImposs sets state metric, Whitworth and US blades in one set, so one gauge covers the fasteners on US machines, metric hardware and Whitworth threads.
What is the difference between 55 degree and 60 degree blades?
The angle matches the thread form: Whitworth threads use 55 degrees and metric and US threads use 60 degrees. A set with both angles, like the 3-system sets here, covers both forms.
Can a thread pitch gauge check internal threads?
Yes, with narrow blades. The PEC listing states its narrow blade design permits checking internal and external screw threads, and the Glarks listing states its blades measure internal and external screw threads.
Related: CNC tooling, tap vs thread mill, best CNC router bits, best end mill for aluminum and best CNC hold-down clamps.




