Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Teflon Sheet 1 Mm (2026): 5 Picks Compared

Five PTFE teflon sheets compared by size, thickness, temperature range and pack size, from a 1 mm sheet for gaskets and seals to heat press sheets for transfers.

Best Teflon Sheet 1 Mm (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1NBLJF PTFE Sheet 1 mmBest OverallNBLJF PTFE Sheet 1 mm9.6/10View on Amazon
  2. 2Cricut Teflon SheetsBest for Heat PressCricut Teflon Sheets9.6/10View on Amazon
  3. 3TransOurDream SheetsBest Large PackTransOurDream Sheets9.5/10View on Amazon
  4. 4ELFULLY PTFE SheetBest for Gaskets and SealsELFULLY PTFE Sheet9.5/10View on Amazon

A heat press transfer that sticks where it should and lifts clean where it should not starts with the sheet between the press and the project. A teflon sheet keeps dye and adhesive off the platen, protects the fabric or blank underneath, and wipes clean for the next run. This guide compares five PTFE sheets for makers who press shirts, mugs and sublimation blanks, and it names the best teflon sheet 1 mm for gaskets, seals and liners as well as the heat press sheets that suit transfer work.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall NBLJF PTFE Sheet 1 mm: The only sheet in this guide the listing states as 1 mm thick, with a stated temperature range of -192°C to 260°C and resistance to most acids and alkalis. Check price on Amazon
  • Best for Heat Press Cricut Teflon Sheets: Three 12 x 16 in sheets rated up to 500°F for continuous use, reusable and wipe clean with a dry cloth. Check price on Amazon
  • Best Large Pack TransOurDream Sheets: Twelve 16 x 20 in sheets for heat press and sublimation work, reusable and designed to be used hundreds of times. Check price on Amazon
  • Best for Gaskets and Seals ELFULLY PTFE Sheet: A 3 pack of 12 x 6 in sheets the listing states for track seals, insulation, linings and bearing sliders. Check price on Amazon

Machines on the list

PTFE Plastic Sheet, Virgin PTFE Sheet Teflon

PTFE Plastic Sheet, Virgin PTFE Sheet Teflon

NBLJF9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single 200mm x 200mm PTFE sheet, 1 mm thick, with a stated temperature range of -192°C to 260°C and resistance to most acids and alkalis.

Pros

  • The only pick here the listing states as 1 mm thick, at 200mm x 200mm
  • Stated temperature range of -192°C to 260°C
  • Resists most acids and alkalis, including sodium hydroxide and hydrochloric acid
  • Easy to cut and shape, for gaskets, seals, liners, sliders and insulation parts

Cons

  • Only 1 sheet in the pack
  • No warranty term is stated
  • The listing warns the soft, formable plastic may show slight deformation during shipping
  • No heat press use is stated in the listing
Cricut Teflon Pressing Sheets

Cricut Teflon Pressing Sheets

Cricut9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Three 12 x 16 in PTFE pressing sheets, rated up to 500°F for continuous use and 608°F for short exposures, for heat press transfers.

Pros

  • Rated up to 500°F for continuous use and 608°F for short exposures
  • Three 12 x 16 in sheets, sized for heat press work
  • Reusable, waterproof and oil-resistant, and wipes clean with a dry cloth
  • Thin, flexible design contours to the project, and tear-resistant but can be cut to size

Cons

  • No thickness is stated in the listing
  • No warranty term is stated; the listing gives a warranty description of No
  • Heat press use only; no gasket, seal or liner use is stated
ELFULLY 3 Pack White PTFE Virgin Sheet

ELFULLY 3 Pack White PTFE Virgin Sheet

ELFULLY9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 pack of white PTFE sheets, 12 x 6 in and 1/16 in thick, with a stated temperature range of -320.8°F to 500°F for craft and industrial uses.

Pros

  • Three 12 x 6 in sheets, 1/16 in thick, that can be freely trimmed
  • Stated temperature range of -320.8°F to 500°F
  • Resistant to corrosive chemicals, acids and alkalis, without degradation
  • Non-stick surface that rinses clean with water and air dries

Cons

  • 1/16 in thick, not the 1 mm this guide focuses on
  • No warranty term is stated
  • Sheets may arrive with slight curl or edge warping and may not lie perfectly flat
  • The listing states the sheets need 24 to 48 hours under heavy objects before use
Erthskda 3 Pack White PTFE Virgin Sheet

Erthskda 3 Pack White PTFE Virgin Sheet

Erthskda9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 pack of white PTFE sheets, 12 x 6 in, with a stated temperature range of -112°F to 212°F for sealing, gasket and craft work.

Pros

  • Three 12 x 6 in sheets, 30.5 x 15.3 cm, for sealing and gasket work
  • Low friction and non-stick surface, easy to process and cut to size
  • Electrical insulation across different frequencies, per the listing
  • Stated uses include industrial sealing, gasket manufacturing and DIY crafts

Cons

  • No warranty term is stated
  • The stated temperature range of -112°F to 212°F is the narrowest in this guide
  • The listing gives no heat press temperature range for transfer work
TransOurDream PTFE Teflon Sheets, Size L 16 x 20

TransOurDream PTFE Teflon Sheets, Size L 16 x 20

TransOurDream9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 pack of PTFE teflon sheets, 16 x 20 in each, for heat press, sublimation and heat transfer work.

Pros

  • Twelve 16 x 20 in sheets, the largest sheets in this guide
  • Reusable and designed to be used hundreds of times, per the listing
  • Non-stick surface that wipes clean after each use
  • Stated for auto heat press machines, heat transfer paper and sublimation paper

Cons

  • No thickness is stated in the listing
  • No temperature range is stated in the listing
  • No warranty term is stated
  • No gasket, seal or liner use is stated

Other machines to compare

Specs compared

Sheet HQ Score Size Thickness Pack Temperature range Uses Warranty
NBLJF PTFE Sheet 1 mm 9.6/10 200mm x 200mm 1 mm 1 sheet -192°C to 260°C Gaskets, seals, liners, sliders, insulation parts Not stated
Cricut Teflon Sheets 9.6/10 12 x 16 in Not stated 3 sheets Up to 500°F continuous, 608°F short exposure Heat press transfers Not stated
ELFULLY PTFE Sheet 9.5/10 12 x 6 in 1/16 in 3 sheets -320.8°F to 500°F Track seals, insulation, linings, bearing sliders Not stated
Erthskda PTFE Sheet 9.5/10 12 x 6 in 1/16 in in title, 0.05 in in bullets 3 sheets -112°F to 212°F Sealing, gaskets, lining, insulation, crafts Not stated
TransOurDream Sheets 9.5/10 16 x 20 in Not stated 12 sheets Not stated Heat press, sublimation, heat transfer Not stated

Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Thickness is the thickness each listing states; where a listing does not state a thickness, the table says Not stated. Temperature ranges are the ranges each listing states, in the units each listing uses.

What the listings tell you, and what they leave out

Five PTFE sheet listings were read for this guide. Only 1 states a thickness of 1 mm, and that sheet is the NBLJF listing at 200mm x 200mm x 1mm. Two of the 5 state a thickness of 1/16 inch in the title, and 1 of those 2 gives a different thickness in its bullets. Three of the 5 state a temperature range in Fahrenheit, 1 states a range in Celsius, and 1 states no temperature at all. None of the 5 states a warranty term, and 1 states a warranty description of No.

Thickness is the gap to watch. Only the NBLJF listing states 1 mm. The ELFULLY and Erthskda listings state 1/16 inch in the title, while the Erthskda bullets state 0.05 inch, or 1.2 mm. The Cricut and TransOurDream listings state no thickness at all, which matters for a buyer who needs a sheet of a set thickness for a gasket or a liner.

Buying guide: choosing the best teflon sheet 1 mm

Thickness and the 1 mm question

The NBLJF sheet is the only pick here the listing states as 1 mm thick, at 200mm x 200mm. The ELFULLY and Erthskda sheets are 1/16 inch in the title, and the Erthskda bullets give 0.05 inch, or 1.2 mm, instead. The Cricut and TransOurDream listings state no thickness to compare.

Size and pack count

Sheet size runs from 12 x 6 in for the ELFULLY and Erthskda packs to 16 x 20 in for the TransOurDream pack, with the Cricut sheets at 12 x 16 in and the NBLJF sheet at 200mm x 200mm. Pack counts run from 1 sheet for NBLJF to 12 sheets for TransOurDream, with 3 sheets in the ELFULLY, Cricut and Erthskda packs.

Temperature range

Temperature range is where the listings differ most. ELFULLY states -320.8°F to 500°F, Cricut states up to 500°F for continuous use and 608°F for short exposures, Erthskda states -112°F to 212°F, and NBLJF states -192°C to 260°C. TransOurDream states heat resistance with no stated temperature range.

Non-stick surface and chemical resistance

Every listing in this guide states a non-stick surface. ELFULLY, NBLJF and Erthskda state chemical resistance to acids and alkalis, with NBLJF naming sodium hydroxide and hydrochloric acid. Cricut states a waterproof and oil-resistant surface that wipes clean with a dry cloth, and TransOurDream states a surface that wipes clean after each use.

If a sheet arrives curled

ELFULLY states that PTFE is a soft, formable plastic and that sheets may arrive with slight curl or edge warping, and the listing states the fix: place the sheets under heavy objects for 24 to 48 hours before use. NBLJF states the same warning in shorter form, that the soft, formable plastic may show slight deformation during shipping.

Project Match

Pair the project with the pick the listing fits:

  • Heat press transfers and sublimation: Cricut Teflon Sheets, 12 x 16 in sheets the listing rates up to 500°F for continuous use.
  • Gaskets, seals and liners at 1 mm: NBLJF PTFE Sheet 1 mm, the only pick the listing states as 1 mm thick.
  • Track seals, insulation and bearing sliders: ELFULLY PTFE Sheet, 12 x 6 in sheets the listing states for those uses.
  • Large heat press work: TransOurDream Sheets, 16 x 20 in sheets in a pack of 12.
  • Sealing, gasket work and crafts: Erthskda PTFE Sheet, 12 x 6 in sheets the listing states for industrial sealing and gasket manufacturing.

How the scores add up

Each sheet is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the scoring method page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
NBLJF PTFE Sheet 1 mm 9.6 32 21 20 7 0
Cricut Teflon Sheets 9.6 30 20 20 7 0
ELFULLY PTFE Sheet 9.5 28 20 21 6 0
Erthskda PTFE Sheet 9.5 27 19 20 5 0
TransOurDream Sheets 9.5 26 19 21 4 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

FAQ: lasers and CNC

Which teflon sheet in this guide is 1 mm thick?

The NBLJF PTFE Sheet 1 mm. Its listing states 1 sheet of 200mm x 200mm x 1mm, with a temperature range of -192°C to 260°C and resistance to most acids and alkalis. No other listing in this guide states a thickness of 1 mm.

Can a teflon sheet be cut to size?

Yes, where the listing states it. ELFULLY states the sheets can be freely trimmed for craft projects, Cricut states the sheets are tear-resistant but can be cut to size, and NBLJF and Erthskda state the sheets are easy to cut and shape.

What temperature can a teflon sheet handle?

It depends on the listing. ELFULLY states -320.8°F to 500°F, Cricut states up to 500°F for continuous use and 608°F for short exposures, Erthskda states -112°F to 212°F, and NBLJF states -192°C to 260°C. TransOurDream states heat resistance with no temperature range.

Are teflon sheets reusable?

The listings that state it say yes. Cricut states the sheets are reusable and wipe clean with a dry cloth, TransOurDream states the sheets are reusable and designed to be used hundreds of times, and ELFULLY states the sheets are reusable formable sheets.

Can a teflon sheet be used for gaskets?

Yes, where the listing states gasket use. NBLJF lists gaskets, seals, liners, sliders and insulation parts, ELFULLY lists track seals and bearing sliders among its uses, and Erthskda lists industrial sealing and gasket manufacturing. The Cricut and TransOurDream listings state heat press use only.

Related: the best teflon sheet for heat press, the best teflon sheet for dtf, and the best teflon sheet with tape. Also see the teflon sheet vs silicone heat press pad.

More buying guides