Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Scoring Stylus for Cricut (2026): 5 Picks Compared

Scoring styluses compared by machine fit, tip, install, projects and warranty.

Best Scoring Stylus for Cricut (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Welebar Scoring StylusBest OverallWelebar Scoring Stylus9.7/10View on Amazon
  2. 2Cricut Scoring StylusBest Official PickCricut Scoring Stylus9.6/10View on Amazon
  3. 3AOUWEY Scoring StylusBest GripAOUWEY Scoring Stylus9.6/10View on Amazon
  4. 4Corey-z Scoring StylusBest for Aluminum TagsCorey-z Scoring Stylus9.6/10View on Amazon

A card that will not fold straight ruins the whole project. The crease wanders, the paper cracks along the wrong line, and a box that should snap together ends up lopsided. A best scoring stylus for cricut presses a clean fold line into the paper before the machine cuts, so cards, envelopes and boxes fold exactly where they should. This guide compares scoring styluses by machine fit, tip, install, projects and warranty.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Welebar Scoring Stylus: Widest machine fit here, a metal tip, and clamp A install without removing the blade, with a 1-year warranty. Check price on Amazon
  • Best Official Pick Cricut Scoring Stylus: The original Cricut stylus for Explore and Maker machines, with a 1-year limited warranty. Check price on Amazon
  • Best Grip AOUWEY Scoring Stylus: A 6.2 inch length and 1.5 inch width grip for comfortable holding, for Maker and Explore Air machines. Check price on Amazon
  • Best for Aluminum Tags Corey-z Scoring Stylus: A non-slip wrap grip, strong enough to score and groove aluminum tags, with a 6-month warranty. Check price on Amazon

Machines on the list

Welebar Scoring Stylus Compatible with Cricut

Welebar Scoring Stylus Compatible with Cricut

Welebar9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A metal-tip scoring stylus with the widest machine fit here, installing in clamp A without removing the blade.

Pros

  • Fits Maker 3, Maker 4, Maker, Explore 3, Explore 4, Air 2 and Air
  • Metal tip makes neat, smooth creases, not deep sharp trenches
  • Installs in clamp A without removing the cutting blade on clamp B
  • Scoring depth is set by the machine for different materials

Cons

  • No weight in a round figure, only 0.04 lb in the spec table
  • No length or width in the bullets
  • No leather or aluminum use stated
  • No color choice beyond grey
Cricut Scoring Stylus, Lilac

Cricut Scoring Stylus, Lilac

Cricut9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The original Cricut scoring stylus for Explore and Maker machines, scoring fold lines for cards, envelopes, boxes and 3D projects.

Pros

  • The original Cricut stylus, made for Explore and Maker machines
  • Scores fold lines for cards, envelopes, boxes and 3D projects
  • 10.25 inches long, the longest stylus here
  • 1-year limited warranty from Cricut

Cons

  • Narrowest machine fit here, Explore and Maker only
  • No tip material stated
  • No install detail stated
  • No color choice beyond lilac
Scoring Stylus for Cricut Maker/Cricut Explore Air

Scoring Stylus for Cricut Maker/Cricut Explore Air

AOUWEY9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A scoring stylus with a 6.2 inch length and 1.5 inch width grip, for Maker, Explore Air 2 and Air machines.

Pros

  • 6.2 inch length and 1.5 inch width grip for comfortable holding
  • Scores straight, crisp fold lines for cards and boxes
  • Works with leather and paper crafts, origami and bookbinding
  • 1-year warranty

Cons

  • Narrowest fit of the non-Cricut picks, Maker, Explore Air 2 and Air only
  • No tip material stated
  • No weight stated
Corey-z Scoring Stylus for Cricut Maker 3/Air

Corey-z Scoring Stylus for Cricut Maker 3/Air

corey-z9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A scoring stylus with a soft non-slip wrap, sized 6.2 inch by 0.6 inch, for Maker 3, Maker, Explore 3 and Explore Air machines.

Pros

  • Soft adhesive wrap on the body, non-slip in the hand
  • Strong enough to score and groove aluminum tags
  • Fits Maker 3, Maker, Explore 3, Explore Air 2 and Explore Air
  • Fold lines are straight and crisp for cards, envelopes and boxes

Cons

  • 6-month warranty, shorter than the 1-year terms here
  • No weight stated
  • No install detail stated
Scoring Stylus for Maker/Explore/Air

Scoring Stylus for Maker/Explore/Air

LIKART9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A scoring stylus with the widest machine fit here, snapping into the pen holder so you can score and cut at the same time.

Pros

  • Fits Maker 4, Maker 3, Maker, Explore 4, Explore 3, Air 2 and Air
  • Snaps into the pen holder, no need to remove the cutting blade
  • Fold line depth is set by the material on the machine
  • Fits the tool storage tray with the rest of your tools

Cons

  • No warranty term in the listing
  • No tip material stated
  • No length or width stated
  • No weight in a round figure, only 0.045 pounds

Specs compared

Model HQ Score Fits Tip Install Projects Weight Warranty
Welebar Scoring Stylus 9.7/10 Maker 3, Maker 4, Maker, Explore 3, Explore 4, Air 2, Air Metal Clamp A, blade stays in Envelopes, cards, boxes 0.04 lb 1 year
Cricut Scoring Stylus 9.6/10 Explore, Maker Not stated Not stated Cards, envelopes, boxes, 3D projects 0.05 lb 1 year limited
AOUWEY Scoring Stylus 9.6/10 Maker, Explore Air 2, Air Not stated Not stated Cards, envelopes, boxes, 3D creations Not stated 1 year
Corey-z Scoring Stylus 9.6/10 Maker 3, Maker, Explore 3, Air 2, Air Not stated Not stated Cards, envelopes, boxes, bags, 3D creations Not stated 6 months
LIKART Scoring Stylus 9.6/10 Maker 4/3, Maker, Explore 4/3, Air 2, Air Not stated Pen holder, blade stays in Cards, envelopes, boxes, bags, 3D creations 0.045 lb Not stated

We give each product’s specs as its manufacturer rates them; listings read 12 November 2026. Fit is the list of Cricut machines each listing names.

What the listings tell you

This guide covers 5 scoring styluses. The official Cricut stylus names the fewest machines, Explore and Maker, while the Welebar and LIKART name the widest fit, including Maker 3, Maker 4, Explore 3 and Explore 4. The AOUWEY names 3 machines and the corey-z names 5.

Two listings contradict themselves on size. The AOUWEY bullets give a 1.5 inch width while the spec table gives 0.4 inches, and the corey-z bullets give a 6.2 inch length and 0.6 inch width while the spec table gives 6.1 x 0.5 x 0.3 inches. The warranty picture is thin too: 3 listings state 1 year, the corey-z states 6 months, and the LIKART states no warranty term.

How to choose the best scoring stylus for cricut

Machine fit first

Fit decides everything: a stylus that does not sit in your machine scores nothing. The Cricut stylus fits Explore and Maker machines. The Welebar and LIKART fit Maker 3, Maker 4, Maker, Explore 3, Explore 4, Air 2 and Air. The corey-z fits Maker 3, Maker, Explore 3, Explore Air 2 and Explore Air, and the AOUWEY fits Maker, Explore Air 2 and Air. Check the listing against your machine model before you buy. See the scoring stylus for cricut hub for more craft machine gear.

Tip and crease

A scoring stylus presses a crease, not a cut. The Welebar has a metal tip and makes neat, smooth creases, not deep sharp trenches, with the depth set by the machine. The corey-z claims its pen is strong enough to score and groove aluminum tags. The other listings state no tip material, so judge them on fit and warranty instead.

Install without removing the blade

The Welebar installs in clamp A and does not need the cutting blade on clamp B removed, so you can score and cut without frequent disassembly. The LIKART snaps into the tool holder normally reserved for a pen, and you do not have to remove the cutting blade either. The Cricut, AOUWEY and corey-z listings state no install detail.

Size and grip

Styluses here run 6.1 to 6.2 inches long, except the Cricut at 10.25 inches. The AOUWEY gives a 1.5 inch width grip for comfortable holding, and the corey-z has a soft adhesive wrap for a non-slip grip. The Welebar is a solid plastic pen container with a metal tip. Pick the grip that suits your hand, and store the stylus in the tool tray: the LIKART fits the tool storage tray with the rest of your tools.

Warranty

The Cricut, Welebar and AOUWEY each state a 1-year term, the corey-z states 6 months, and the LIKART states no warranty term. On a small tool, the warranty is less about the money and more about whether the maker stands behind the fit.

Project Match

Match the project to the pick, using only what each listing states.

  • Cards, envelopes and boxes on any Cricut: Welebar Scoring Stylus, with the widest machine fit and a metal tip.
  • Cards and 3D projects on Explore and Maker: Cricut Scoring Stylus, the original tool for those machines.
  • Leather and paper crafts with a wide grip: AOUWEY Scoring Stylus, with a 6.2 inch length and 1.5 inch width grip.
  • Cards, bags and aluminum tags: Corey-z Scoring Stylus, with a non-slip wrap and a claim to groove aluminum tags.
  • Large amounts of paper crafts: LIKART Scoring Stylus, which snaps into the pen holder so you can score and cut at the same time.

How the scores add up

Each stylus is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing states a safety certification, so all score zero on safety. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Welebar Scoring Stylus 9.7 32 21 21 n/a 2
Cricut Scoring Stylus 9.6 28 21 19 n/a 2
AOUWEY Scoring Stylus 9.6 27 20 20 n/a 2
Corey-z Scoring Stylus 9.6 29 21 19 n/a 2
LIKART Scoring Stylus 9.6 30 21 20 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

What is a scoring stylus?

A pen-like tool that presses fold lines into paper and card, instead of cutting them. The stylus indents the fold line to make a clean, precise crease, so cards, envelopes and boxes fold straight.

What is a scoring stylus for Cricut?

A scoring stylus made to fit a Cricut machine, which presses the fold lines while the machine cuts the shape. The Cricut stylus fits Explore and Maker machines, and the Welebar and LIKART fit Maker 3, Maker 4, Maker, Explore 3, Explore 4, Air 2 and Air.

How do I use a scoring stylus with a Cricut Maker 3?

Install the stylus in the machine, set the material, and let the machine score the fold lines before it cuts. The Welebar installs in clamp A without removing the cutting blade on clamp B, and the LIKART snaps into the tool holder normally reserved for a pen. The depth of scoring is set by the machine and the material you choose.

Why does my Cricut scoring stylus pop out?

The listings here do not answer this. The Welebar and LIKART both say their styluses are easy to install and remove, and the LIKART snaps into the tool holder. Check that the stylus is fully seated in the holder and that it matches your machine model, and check the listing for install notes.

How do I use a scoring stylus with a Cricut Explore?

Install the stylus in the machine and set the material, and the machine scores the fold lines before cutting. The Cricut stylus is made for Explore and Maker machines. The Welebar and LIKART also fit Explore 3, Explore 4 and Air models, and both install without removing the cutting blade.

Related: the craft machines hub, and the cutting machines hub. Also see the best cutting machine blade. Also see the best cutting machine stand. Also see the best weeding tools for vinyl cutting. Also see the best vinyl cutting knife. Also see the best Cricut cutting mat under 20.

More buying guides