Best Router Bits for Shapeoko Under $15 (2026): 4 Compared
Four router bit sets, two straight sets, a chamfer bit and a roundover set, with 1/4 and 1/2 inch shanks, compared by diameter, depth, material and warranty.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallNewdeli Straight Set9.5/10View on Amazon - 2
Best ChamferYonico Chamfer Bit9.4/10View on Amazon - 3
Straight SetWolfride Straight Set9.6/10View on Amazon - 4
Roundover SetFeanron Roundover Set9.5/10View on Amazon - 5
YONICO Router Bits Biscuit Cutter Joint Slot #10 1/4-InchView on Amazon - 6
Wolfride 2Pcs Dovetail Router Bits 1/4 Inch Shank DovetailView on Amazon - 7
MNA Top Bearing Flush Trimming Router Bits Set of 4View on Amazon - 8
YONICO Router Bits Straight Bit 3/4-Inch Diameter X 3/4-InchView on Amazon - 9
YONICO Router Bits V Groove 60 Degree X 1/2-Inch DiameterView on Amazon - 10
BAIDETS 1/4" Tongue and Groove Router BitsView on Amazon
A sign blank waiting for its first letters, a small batch of leather patches, and a set of cut parts for a weekend project are the jobs that call for fresh router bits, and the best router bits for shapeoko under 15 cover straight cuts, chamfers and roundovers for the next project. This guide compares four router bit sets, two straight sets, one chamfer bit and one roundover set, by shank, cutting diameter, cutting depth, material and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Newdeli Straight Set: 3-piece straight set, 1/2 inch shank, YG6 carbide, 12-month warranty. Check price on Amazon
- Best Chamfer Yonico Chamfer Bit: 45 degree chamfer, 1/4 inch shank, C3 carbide blades. Check price on Amazon
- Straight Set Wolfride Straight Set: 4-piece straight set, 1/4 inch shank, double flutes. Check price on Amazon
- Roundover Set Feanron Roundover Set: 4-piece roundover set, 1/4 inch shank, four diameters. Check price on Amazon
Machines on the list
Wolfride 4pcs Straight Cut Router Bits 1/4-Inch
Four straight bits on 1/4 in shanks in YG6 carbide, spanning 1/4, 5/16, 3/8 and 1/2 in diameters for CNC, table and handheld routers.
Pros
- Four bits in one set: 1/4, 5/16, 3/8 and 1/2 in diameters
- YG6 carbide blades with 45# carbon steel bodies, per the bullets
- Double flute on every bit in the set
- Lists use on CNC, table mounted and handheld routers
Cons
- Spec table lists Alloy Steel against the bullets' YG6 carbide
- Cutting heights are approximate per bit, 13/16 to 1-3/16 in
- No RPM figure stated on the listing
- No warranty term is stated
Straight Cut Router Bits
A 3-piece straight bit set with a 1/2 inch shank, double flutes and cutting diameters of 1/4, 3/8 and 1/2 inch, for dado and straight cuts.
Pros
- Three diameters in one set: 1/4, 3/8 and 1/2 inch
- YG6 carbide blades with 45# carbon steel body
- Anti-kickback design
- Double flutes for straight cuts and dados
Cons
- Spec table lists Number of Items as 1 against a 3-piece set in the title and bullets
- 1/2 inch shank only, no 1/4 inch option in this set
- Avoid cutting metal and non-wood materials per the listing
- Cutting depth about 1 inch on all three bits
4PCS Router Bit Set Feanron Router Bits 1/4 inch
A 4-piece roundover router bit set with 1/4-inch shank, radii of 1/8, 1/4, 3/16 and 5/16 inch, C2 carbide with guide bearings.
Pros
- 4 roundover radii for edge profiles and molding
- C2 carbide with guide bearings
- 1/4-inch shank fits standard routers
- Good for edging and molding
Cons
- Roundover only, no straight or spiral
- No warranty term stated on the listing
- 4 pieces, smallest set here
- Bearings wear and need replacement
YONICO Chamfer Router Bits Edge Forming 45 Degree
A 45 degree chamfer bit with a 1/4 inch shank, a 1/2 inch cutting depth and a 1.5 inch cutting diameter, for beveled edges and miter joints.
Pros
- 45 degree chamfer for beveled edges and miter joints
- C3 micro-grain tungsten carbide blades
- Silver induction brazing for strength
- 1/4 inch shank for handheld and table mount routers
Cons
- Single bit, no set option stated
- No warranty term stated
- Single flute only
- 1.5 inch cutting diameter only, no smaller option stated
Other machines to compare
YONICO Router Bits Biscuit Cutter Joint Slot #10 1/4-InchCheck price on Amazon
Wolfride 2Pcs Dovetail Router Bits 1/4 Inch Shank DovetailCheck price on Amazon
MNA Top Bearing Flush Trimming Router Bits Set of 4Check price on Amazon
YONICO Router Bits Straight Bit 3/4-Inch Diameter X 3/4-InchCheck price on Amazon
YONICO Router Bits V Groove 60 Degree X 1/2-Inch DiameterCheck price on Amazon
BAIDETS 1/4" Tongue and Groove Router BitsCheck price on Amazon
Specs compared
| Model | HQ Score | Type | Shank | Cutting diameter | Cutting depth | Warranty |
|---|---|---|---|---|---|---|
| Newdeli Straight Set | 9.5/10 | Straight set | 1/2 inch | 1/4, 3/8, 1/2 inch | About 1 inch | 12-month warranty |
| Yonico Chamfer Bit | 9.4/10 | Chamfer | 1/4 inch | 1.5 inches | 1/2 inch | Not stated |
| Wolfride Straight Set | 9.6/10 | Straight set | 1/4 inch | Not stated | Not stated | Not stated |
| Feanron Roundover Set | 9.5/10 | Roundover set | 1/4 inch | 1/8, 1/4, 3/16, 5/16 inch | Not stated | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 23 October 2026.
Buying guide: the best router bits for shapeoko under 15
Shank size
Shank size decides fit. The Newdeli set uses a 1/2 inch shank, while the Yonico, Wolfride and Feanron picks use a 1/4 inch shank. Check the collet size before ordering, since a bit that does not match the collet cannot be used.
Straight, chamfer or roundover
Each profile has its job. The Newdeli and Wolfride sets are straight bits for dado and straight cuts, the Yonico bit cuts a 45 degree chamfer for beveled edges and miter joints, and the Feanron set is a roundover set for edging, forming, molding and profiling. Pick the profile that matches the edge or joint in the project.
Flutes and cutting depth
Flute count changes how a bit clears waste. The Newdeli set and the Wolfride set are double flute bits, while the Yonico bit has a single flute. Cutting depth also differs: the Newdeli bits cut about 1 inch deep, the Yonico bit cuts 1/2 inch deep, and the Wolfride and Feanron titles state no depth. Match depth to the thickness of the cut.
Set size and diameter coverage
Piece count decides how many profiles one purchase covers. The Newdeli set holds 3 pieces, the Wolfride set holds 4 pieces and the Feanron set holds 4 pieces, while the Yonico pick is a single bit. A set suits a shop that needs several diameters at once, while a single bit suits one repeated edge profile.
Diameter coverage also differs across the sets. The Newdeli set covers 1/4, 3/8 and 1/2 inch, and the Feanron set covers 1/8, 1/4, 3/16 and 5/16 inch, so the two sets together span a wider range than either set alone. The Yonico bit covers a single 1.5 inch cutting diameter for its 45 degree chamfer, which fits beveled edges and miter joints rather than a range of widths. Before ordering, match the diameters in the set to the cuts planned, and check that the shank matches the collet, since the Newdeli set uses a 1/2 inch shank and the other three picks use a 1/4 inch shank.
Materials and warranty
The Newdeli set lists YG6 carbide blades with a 45# carbon steel body and an anti-kickback design, and it states a 12-month warranty. The Yonico bit lists C3 micro-grain tungsten carbide blades with silver induction brazing. The Newdeli listing says the straight bits suit solid wood, density boards, MDF, chipboard and splint, and it says to avoid cutting metal and non-wood materials. The Yonico listing states silver induction brazing for strength and durability, and the Newdeli listing states high abrasion resistance and high-precision grinding.
Project Match
- Straight cuts and dados: the Newdeli straight set and the Wolfride straight set.
- Beveled edges and miter joints: the Yonico chamfer bit.
- Edging, forming, molding and profiling: the Feanron roundover set.
- Materials stated: solid wood, density boards, MDF and chipboard for the Newdeli set; not stated for the other picks.
How the scores add up
The HQ Score weighs performance, build, value, safety and warranty. For router bits, safety means stated features such as anti-kickback design, and one pick here states it. One pick states a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Newdeli Straight Set | 9.5 | 29 | 20 | 20 | 3 | 1 |
| Yonico Chamfer Bit | 9.4 | 28 | 20 | 20 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: lasers and CNC
What shank size do I need?
The Newdeli set uses a 1/2 inch shank, while the Yonico, Wolfride and Feanron picks use a 1/4 inch shank. Check the collet size before ordering.
Can these bits cut metal?
No. The Newdeli listing says to avoid cutting metal and non-wood materials, and the other listings state no metal cutting use.
What is the difference between a straight bit and a chamfer bit?
A straight bit cuts dado and straight cuts, while a chamfer bit cuts a beveled edge for miter joints. The Yonico bit cuts a 45 degree chamfer.
What materials can these bits cut?
The Newdeli listing states solid wood, density boards, MDF, chipboard and splint, and it says to avoid cutting metal and non-wood materials. The other listings state no material list.
Do any of these bits carry a warranty?
The Newdeli set states a 12-month warranty. The other listings state no warranty term.
Related: best desktop CNC for beginners, the CNC router hub and the CNC tooling hub. Also see our best wood for cnc machine. Also see our cnc router projects for beginners.
