Best Router Bit for Cutting Mortise (2026): 5 Picks for Clean Joints
Five router bits for mortise and tenon joints, from a 10mm spiral flute mortise cutter to straight bits and a flush trim bit, compared by cutting size and shank.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFeyzor 10mm Carbide Bit9.5/10View on Amazon - 2
Best Straight BitYonico 14954q Straight9.5/10View on Amazon - 3
Best Narrow BitYonico 14022q Straight9.4/10View on Amazon - 4
Best SetExqutoo 3-Piece Bit Set9.4/10View on Amazon
A mortise that fits its tenon begins with the right bit. A spiral flute cutter made for mortise work clears chips as it cuts, while a straight bit cuts clean slots for joinery, and this guide compares the best router bit for cutting mortise from the bits below.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Feyzor 10mm Carbide Bit: 10mm solid tungsten carbide spiral flute cutter made for mortise cutting, with a 28mm cutting length. Check price on Amazon
- Best Straight Bit Yonico 14954q Straight: 5/8-inch straight bit with a 1-inch cutting length for dado grooves and straight cuts. Check price on Amazon
- Best Narrow Bit Yonico 14022q Straight: 1/4-inch straight bit with a 1-inch cutting length for narrow dado grooves and straight cuts. Check price on Amazon
- Best Set Exqutoo 3-Piece Bit Set: Three carbide router bits with a 1/4-inch shank for raised panel doors and tenon joints. Check price on Amazon
Machines on the list

10mm Carbide Bit for DF500 Domino Joiner
A 10mm solid tungsten carbide spiral flute cutter made for mortise cutting in a DF500 Domino joiner, with a 28mm cutting length.
Pros
- Made for mortise cutting, with a spiral flute for faster chip removal
- Solid tungsten carbide with a black PTFE coating
- 2 cutting edges for smoother cutting and cleaner mortise results
- 10mm diameter with a 28mm cutting length for furniture and cabinetry
Cons
- Fits DF500 Domino joiner machines only, per the maker
- No warranty term is stated
- One bit in the pack, with no spare included
- 10mm diameter only, with no other size in this listing

YONICO Router Bits Straight Bit 5/8-Inch Diameter
A 5/8-inch straight bit with a 1-inch cutting length and a 1/4-inch shank for dado grooves and straight cuts.
Pros
- 5/8-inch cutting diameter with a 1-inch cutting length
- C3 micro-grain tungsten carbide blades for a sharper edge
- Works on CNC, table mount and handheld routers
- Silver induction brazing for strength and durability
Cons
- A straight bit, not a dedicated mortise cutter
- No warranty term is stated
- One bit in the pack, with no spare included
- 5/8-inch diameter only, with no other size in this listing

YONICO Straight Router Bits 1/4-Inch Diameter X
A 1/4-inch straight bit with a 1-inch cutting length and a 1/4-inch shank for narrow dado grooves and straight cuts.
Pros
- 1/4-inch cutting diameter for narrow dado grooves and straight cuts
- C3 micro-grain tungsten carbide blades for a sharper edge
- Works on CNC, table mount and handheld routers
- Silver induction brazing for strength and durability
Cons
- A straight bit, not a dedicated mortise cutter
- One bit in the pack, with no spare included
- 1/4-inch diameter suits narrow cuts only
- 1/4-inch shank fits 1/4-inch collets only

3PCS 1/4" Shank Router Bit Set,Raised Panel
A 3-piece set of 1/4-inch shank router bits with cemented carbide for raised panel cabinet doors and tenon joints.
Pros
- Three bits in the pack for raised panel doors and tenon joints
- Cemented carbide blades with a hardened steel body
- Anti-backlash design for safe installation
- Suits wood, MDF, particleboard and plywood
Cons
- Made for raised panel doors, not mortise cutting
- 1-5/8-inch tenon cutter, too wide for small mortises
- Not for ferrous metals or non-wood materials
- All three bits serve raised panel work, so the set does not cover straight mortise cuts

Amana Tool 45460-S Flush Trim Router Bit 1/2 D x
A 1/2-inch flush trim router bit with a 1/4-inch shank and an upper ball bearing for template and pattern routing.
Pros
- 1/2-inch diameter with an upper ball bearing for template routing
- Carbide-tipped for long-lasting cutting edge performance
- Works in handheld and table-mounted routers
- Industrial-quality tool from a maker with over 50 years in cutting tools
Cons
- A flush trim bit, not a mortise cutter
- 1/4-inch cutting height cannot cut deep mortises
- Bearing-guided, so it needs a template edge to follow
- One bit in the pack, with no spare included
Specs compared
| Model | HQ Score | Bit type | Cutting diameter | Cutting length | Shank | In the box | Warranty |
|---|---|---|---|---|---|---|---|
| Feyzor 10mm Carbide Bit | 9.5/10 | Spiral flute mortise cutter | 10mm (3/8 in) | 28mm (1.10 in) | Not stated | 1 pack | Not stated |
| Yonico 14954q Straight | 9.5/10 | Straight bit | 5/8 in | 1 in | 1/4 in | 1 bit | Not stated |
| Yonico 14022q Straight | 9.4/10 | Straight bit | 1/4 in | 1 in | 1/4 in | 1 bit | Not stated |
| Exqutoo 3-Piece Bit Set | 9.4/10 | Raised panel set | 1-5/8 in (tenon cutter) | Not stated | 1/4 in | 3 router bits | Not stated |
| Amana 45460-S Flush Trim | 9.3/10 | Flush trim bit | 1/2 in | 1/4 in (cutting height) | 1/4 in | 1 bit | Not stated |
Specifications are manufacturer rated, as published by each maker and collected 22 November 2026.
How to pick the best router bit for cutting mortise
Start with the joint. A mortise is a rectangular pocket, so the bit must cut a straight-sided slot with a flat bottom. The Feyzor spiral flute cutter is the only bit here made for that job, with a spiral flute that clears chips while it cuts. Straight bits cut the same shape as a slot, and the Yonico bits here are made for dado grooves and straight cuts for joinery. Match the bit diameter to the mortise width, and match the shank to the collet on the router or joiner.
Cutting length sets how deep the bit reaches. The Feyzor cutter lists a 28mm cutting length, and both Yonico straight bits list a 1-inch cutting length. Check the cutting length in the specs before ordering, and check the overall length against the depth of the cut.
Buying guide: router bits for mortise work
Match the bit to the joint
Mortise and tenon joints need a bit that cuts a straight-sided pocket. The Feyzor cutter is made for mortise cutting on solid wood and composite materials, for furniture making, cabinetry and fine woodworking. Straight bits suit dado grooves and straight cuts, and the Amana flush trim bit suits template work, so pick the bit by the joint it cuts.
Check the shank and the collet
A bit only fits a router or joiner when the shank matches the collet. The Yonico straight bits, the Exqutoo set and the Amana flush trim bit list a 1/4-inch shank. The Feyzor cutter is listed as a compatible fit for DF500 Domino joiner machines, so check the fit before ordering.
Mind the cutting length
Cutting length is the depth the bit can reach. The Feyzor cutter lists a 28mm cutting length, and both Yonico straight bits list a 1-inch cutting length. The Amana flush trim bit lists a 1/4-inch cutting height, which suits edge trimming rather than deep cuts. Compare the cutting length with the depth of the mortise before buying.
Router bits spin fast and cut on contact. Clamp the workpiece, keep hands clear of the bit, and wear eye and hearing protection. Unplug the router before changing a bit, and check that the bit is seated in the collet before switching on.
Project Match
Match the project to the pick:
- Furniture making, cabinetry and fine woodworking with mortise and tenon joints: Feyzor 10mm Carbide Bit.
- Dado grooves and straight cuts for joinery: Yonico 14954q Straight and Yonico 14022q Straight.
- Raised panel cabinet doors and tenon joints: Exqutoo 3-Piece Bit Set.
- Template and pattern routing of parts and joints: Amana 45460-S Flush Trim.
How the scores add up
Each bit is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the maker does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Feyzor 10mm Carbide Bit | 9.5 | 32 | 21 | 20 | 0 | 0 |
| Yonico 14954q Straight | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Yonico 14022q Straight | 9.4 | 28 | 20 | 20 | 0 | 0 |
| Exqutoo 3-Piece Bit Set | 9.4 | 23 | 19 | 19 | 3 | 0 |
| Amana 45460-S Flush Trim | 9.3 | 23 | 21 | 19 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
Can a straight bit cut a mortise?
Yes. A straight bit cuts straight slots and dado grooves for joinery, and the Yonico straight bits here are made for that work. The Feyzor spiral flute cutter is the bit here made for mortise cutting.
What size bit do I need for a mortise?
Match the bit diameter to the mortise width. The bits here run from a 1/4-inch diameter to a 5/8-inch diameter, and the Feyzor mortise cutter is 10mm in diameter.
Do these bits fit any router?
No. The Yonico straight bits and the Amana flush trim bit list a 1/4-inch shank, so they fit routers with a 1/4-inch collet. The Feyzor cutter is listed as a compatible fit for DF500 Domino joiner machines. Check the shank and the collet before ordering.
Which bit cuts the cleanest mortise?
The Feyzor cutter is the bit here made for mortise cutting, with 2 cutting edges and a spiral flute for faster chip removal. The straight bits cut clean slots for joinery, and the Exqutoo set is built for raised panel doors and tenon joints.
Related: best router bit for dado in plywood, best router bit for hinge mortise, best flush trim bit 1/4 shank, compression vs spiral router bit, router bit sizes chart and the CNC tooling hub.




