Best Heat Press Cooling Block (2026)
Five heat press cooling blocks compared by cooling area, handle, weight, stated cooling time and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBSTSLL Cooling Block9.7/10View on Amazon - 2
Best for DTFLuxiys Ocean Star9.7/10View on Amazon - 3
Best LightweightLuxiys RQK01 Block9.6/10View on Amazon - 4
Best for Small ProjectsHAWERSI Cooling Block9.6/10View on Amazon - 5
Best for Flat StorageDorhui Cooling Block9.6/10View on Amazon
A fresh press run ends with a stack of shirts, a tumbler, and a pile of transfers waiting for a cold peel. The vinyl is still warm, the design needs to set, and the next press is already queued. This guide compares the best heat press cooling block picks by cooling area, handle, weight, stated cooling time and warranty, so the block you grab matches the projects on your table.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall BSTSLL Cooling Block: Largest cooling area at 4.5 x 4.5 in, with 5-10 second cooling stated Check price on Amazon
- Best for DTF Luxiys Ocean Star: Drops from 200°C to around 80°C, per the listing, with an aluminum handle Check price on Amazon
- Best Lightweight Luxiys RQK01 Block: 0.6 lb with an aluminum handle and a butterfly pattern inside Check price on Amazon
- Best for Small Projects HAWERSI Cooling Block: 4 in x 4 in cooling area with a metal handle Check price on Amazon
- Best for Flat Storage Dorhui Cooling Block: 0.5 in thick, so it stores flat Check price on Amazon
Machines on the list

BSTSLL HTV Cooling Block for Heat Press
A 4.5 x 4.5 in block with a metal handle that states cooling within 5-10 seconds, the largest cooling area here.
Pros
- Largest cooling area stated, 4.5 x 4.5 in
- Cools the heat press surface within 5-10 seconds, per the listing
- Metal handle for a comfortable grip
- 1 year manufacturer warranty stated
Cons
- No weight is stated
- No temperature drop figure is stated
- Maker recommends multiple blocks for multiple transfers

HTV Cooling Block with Handle
A 4 in x 4 in block with an aluminum alloy handle that states a drop from 200°C to around 80°C.
Pros
- States a drop from 200°C to around 80°C
- Aluminum alloy handle shaped for a comfortable grip
- 0.6 lb, the lowest weight stated here
- 1 year manufacturer warranty stated
Cons
- No cooling time in seconds is stated
- The 80°C figure is stated as approximate
- Maker recommends multiple blocks for multiple transfers
- Store in the refrigerator before use, per the listing, so it needs fridge space

HTV Cooling Block for T Shirt
A 4 in x 4 in block with an aluminum alloy handle, a butterfly pattern inside and a weight of 0.6 lb.
Pros
- Aluminum alloy handle with a comfortable grip
- Butterfly pattern inside for rapid cooling, per the listing
- 0.6 lb, the lowest weight stated here
- 1 year manufacturer warranty stated
Cons
- No cooling time in seconds is stated
- No temperature drop figure is stated
- No cooling figure is stated for the butterfly pattern
- Store in the refrigerator after use, per the listing, so it needs fridge space

HAWERSI HTV Cooling Block with Handle,Craft Tool
A 4 in x 4 in block with a metal handle in blue and purple, 3.9 x 3.9 x 2.9 in, with a 1 year warranty.
Pros
- 4 in x 4 in cooling area with a metal handle
- Two-color transparent material, blue and purple
- 2.9 in tall, the deepest block here
- 1 year manufacturer warranty stated
Cons
- No cooling time in seconds is stated
- No temperature drop figure is stated
- Maker recommends multiple blocks for multiple transfers

HTV Cooling Block – Fast Cooling Vinyl Craft Tool
A 4 in x 4 in block with no handle stated, 0.5 in thick, that states rapid cooling in a few seconds.
Pros
- 0.5 in thick, the slimmest block here
- Rapid cooling in a few seconds, per the listing
- 4 in x 4 in cooling area covers standard small projects
- 1 year warranty stated
Cons
- No handle is stated
- No weight is stated
- No temperature drop figure is stated
- The listing names no material beyond natural material
Other machines to compare
HTV Cooling Block for Vinyl with HandleCheck price on Amazon
Aluminum HTV Cooling Block for Heat Press with Handle andCheck price on Amazon
Specs compared
| Model | HQ Score | Cooling area | Handle | Weight | Cooling time stated | Warranty |
|---|---|---|---|---|---|---|
| BSTSLL Cooling Block | 9.7/10 | 4.5 x 4.5 in | Metal | Not stated | 5-10 seconds | 1 year |
| Luxiys Ocean Star | 9.7/10 | 4 in x 4 in | Aluminum alloy | 0.6 lb | Not stated | 1 year |
| Luxiys RQK01 Block | 9.6/10 | 4 in x 4 in | Aluminum alloy | 0.6 lb | Not stated | 1 year |
| HAWERSI Cooling Block | 9.6/10 | 4 in x 4 in | Metal | Not stated | Not stated | 1 year |
| Dorhui Cooling Block | 9.6/10 | 4 in x 4 in | Not stated | Not stated | A few seconds | 1 year |
Size and performance figures are the brand’s ratings quoted from listings on 4 November 2026. Cooling area is the area the listing states the block covers.
What the listings tell you, and what they leave out
We read 5 cooling block listings for this guide. All 5 state a 1 year warranty, and 4 state a handle. Only 1 states a cooling time in seconds, and only 1 states a temperature drop in degrees. A pair of listings state a weight of 0.6 lb.
Treat the 4 in x 4 in figure as the cooling area, not the block size: the spec tables list 3.9 x 3.9 in for most blocks, and 4.5 x 4.5 in for the BSTSLL. No listing states a safety certification, so safety scores zero for all.
Buying guide: choosing the best heat press cooling block
Cooling area: 4 in x 4 in and 4.5 x 4.5 in
Four blocks state a cooling area of 4 in x 4 in, and the BSTSLL states 4.5 x 4.5 in in its spec table. The listings state that a 4 in x 4 in area covers conventional small projects without moving the handle. A larger area covers a small project in one place, while a smaller area needs more passes over a wide transfer.
Handle or no handle
Four blocks state a handle: metal on the HAWERSI and BSTSLL, aluminum alloy on the 2 Luxiys blocks. The handle lets you move the block back and forth over the vinyl after the press. The Dorhui lists no handle, so it is pressed and lifted by hand.
Cold peel and color
The Dorhui listing states that cold peel gives more vibrant colors and smoother designs than hot peel. The other listings describe covering the vinyl with the block right after the press and moving the handle back and forth. Those are maker claims about the finish, so check the peel on a spare transfer first.
Fridge time
Every listing recommends the refrigerator or freezer for a better cooling effect, before use or after use. The HAWERSI, BSTSLL and Dorhui listings say to put the block in the refrigerator or freezer, and the 2 Luxiys listings say the same. Keep a shelf spot free, since a warm block cools slower than a cold one.
One block or several
Four listings recommend multiple blocks for multiple transfers: HAWERSI, Dorhui, BSTSLL and the Luxiys Ocean Star. With several blocks, a cold surface is always ready while the others warm up. For a single shirt, 1 block is enough; for a run of shirts, plan on more than 1.
Project Match
| Project | Pick | Stated fit |
|---|---|---|
| T-shirts, bags, shoes, pillows, mouse pads | HAWERSI Cooling Block | Listing names those projects |
| DTF transfers | BSTSLL Cooling Block | Designed for rapid cooling of DTF transfers, 5-10 seconds stated |
| Sublimation paper and heat transfer paper | Luxiys RQK01 Block | Listing names both, with a butterfly pattern inside |
| Tumblers and shoes | Dorhui Cooling Block | Listing names T-shirts, bags, tumblers, shoes, pillowcases |
| Flat storage between presses | Dorhui Cooling Block | 0.5 in thick |
How the scores add up
Each block is scored on performance, build, value, safety and warranty. How we pick explains the weights. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BSTSLL Cooling Block | 9.7 | 32 | 21 | 21 | n/a | 2 |
| Luxiys Ocean Star | 9.7 | 30 | 21 | 21 | n/a | 2 |
| Luxiys RQK01 Block | 9.6 | 29 | 21 | 20 | n/a | 2 |
| HAWERSI Cooling Block | 9.6 | 29 | 20 | 20 | n/a | 2 |
| Dorhui Cooling Block | 9.6 | 28 | 19 | 20 | n/a | 2 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
Do I need to put a cooling block in the fridge?
Every listing here recommends it. The HAWERSI, BSTSLL and Dorhui listings say to put the block in the refrigerator or freezer, and the 2 Luxiys listings say the same, for a better cooling effect.
What size cooling block do I need?
Four blocks state a cooling area of 4 in x 4 in, and the BSTSLL states 4.5 x 4.5 in. The listings state that 4 in x 4 in covers conventional small projects without moving the handle, so match the area to the size of the transfer.
How fast does a cooling block cool a transfer?
Only 1 listing states a time in seconds: the BSTSLL states it cools the heat press surface within 5-10 seconds. The Dorhui states rapid cooling in a few seconds. The other listings state no time, only fast heat absorption.
Can I use one cooling block for many presses?
Four listings recommend multiple blocks for multiple transfers: HAWERSI, Dorhui, BSTSLL and the Luxiys Ocean Star. With several blocks, a cold surface is always ready while the others warm up.
Do cooling blocks come with a warranty?
All 5 blocks here state a 1 year warranty. Four state 1 Year Manufacturer, and the Dorhui states 1 YEAR. No listing states a longer term.
Related: the heat press and sublimation hub, laser engraver vs heat press, and the craft machines hub. Also see our dtf printer vs heat press. Also see our best heat press for dtf transfers. Also see our heat transfer vinyl vs screen printing. Also see our sublimation vs heat transfer vinyl. Also see our dtf vs heat transfer vinyl. Also see our teflon sheet vs silicone heat press pad.




