Best Aluminum T Track (2026): 5 Picks for Jigs and Fixtures
5 anodized 6063 aluminum T tracks in 48-inch, 12-inch and 3-inch lengths, compared by pack size, profile, mounting holes and screws.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHot Favorable 48in9.6/10View on Amazon - 2
Best Long Track With ScrewsSTRONGROWTH 48in9.6/10View on Amazon - 3
Best Short TrackSeekLiny 12in 4-Pack9.6/10View on Amazon - 4
Best Intersection KitHOTTARGET 3in Kit9.4/10View on Amazon
A router table fence that slides and locks where you set it starts with the track under it. The same goes for a drill press table, a jig, or a bench full of hold-downs: the slot has to hold the bolt, and the bar has to sit flat and stay put. This guide compares the best aluminum t track picks for woodworking jigs and fixtures, on the details each listing actually states: length, pack size, profile, mounting holes and screws.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Hot Favorable 48in: 6 bars at 48 inches each, a double-cut profile, pre-drilled holes, and room for 5/16-inch and 1/4-inch T-bolts. Check price on Amazon
- Best Long Track With Screws STRONGROWTH 48in: 4 bars at 48 inches each with 48 screws in the box, pre-drilled holes and a red anodized finish. Check price on Amazon
- Best Short Track SeekLiny 12in 4-Pack: 4 bars at 12 inches each with 12 screws in the box, in 6063 aluminum with a black anodized finish. Check price on Amazon
- Best Intersection Kit HOTTARGET 3in Kit: 16 short 3-inch bars for crossing tracks, with 32 screws in the box and a blue anodized finish. Check price on Amazon
Machines on the list

Hot Favorable Aluminum 48" T-Track
6 bars of 48-inch black anodized 6063 aluminum T track with a double-cut profile, pre-drilled mounting holes and room for 5/16-inch and 1/4-inch T-bolts.
Pros
- 6 bars at 48 inches each, the longest tracks in this guide
- Double-cut profile fits 5/16-inch and 1/4-inch T-bolts and 1/4-inch hex bolts
- Pre-drilled mounting holes, 12 screws per track, with 6 x 5/8-inch flat head Phillips screws recommended
- Black anodized 6063 aluminum alloy, made for jigs and fixtures on woodworking and metalworking machines
Cons
- Screws are not included; the listing says to supply 72 screws for the set
- No weight in the listing
- No warranty term in the listing
- No color choice; black is the only finish stated

48" Aluminum T Track for Woodworking Jigs
4 bars of 48-inch red anodized aluminum T track with pre-drilled mounting holes and 48 screws in the box.
Pros
- 4 bars at 48 inches each with 48 screws included in the box
- Pre-drilled mounting holes with screws included
- Red anodized finish, precision extruded aluminum that the listing says will not warp or alter in shape
- Double-cut profile, made for jigs and fixtures on a router table or drill press table
Cons
- No warranty term in the listing
- No bolt sizes stated; the listing says it works with clamps, T bolts and knobs without giving sizes
- Red is the only color stated
- No length choice; 48 inches is the only length stated

SeekLiny T Tracks Woodworking Aluminum 12 inch
4 bars of 12-inch black anodized 6063 aluminum T track with pre-drilled mounting holes and 12 screws in the box.
Pros
- 4 bars at 12 inches each, with 12 screws in the box
- Dimensions stated in inches and millimeters: 12 inches by 3/4 inch by 3/8 inch, or 305 mm by 19 mm by 9.5 mm
- Double-cut profile fits 5/16-inch and 1/4-inch T-bolts and 1/4-inch hex bolts
- Black anodized 6063 aluminum, sandblast finish, corrosion resistant and non-fading per the listing
Cons
- No warranty term in the listing
- No clamp sizes stated
- The listing does not state how many mounting holes each bar has
- Black is the only color stated

Vibit 2 Pcs 12 Inch Aluminum T Track Woodworking
2 bars of 12-inch blue anodized 6063 aluminum T track with a double-cut profile, 2 screws and 2 pre-drilled holes per track.
Pros
- Dual parallel slots accept 5/16-inch T-bolts, 1/4-inch T-bolts and 1/4-inch hex bolts
- Slim 12-inch by 3/4-inch by 3/8-inch size, also stated as 30 cm by 1.9 cm by 0.94 cm
- 2 mounting screws and 2 pre-drilled holes per track, in the box
- Stated for router tables, drill presses, CNC machines, assembly benches and workbenches
Cons
- No warranty term in the listing
- 2 bars is the smallest pack in this guide
- Blue is the only color stated, and only in the spec table
- No clamp sizes stated

HOTTARGET Aluminum T-Track Intersection Kit
A 4-pack intersection kit of short 3-inch blue anodized 6063 aluminum T track bars with screws in the box.
Pros
- 16 bars at 3 inches each for crossing tracks and building intersections
- 32 screws in the box, 2 screws per track
- CNC-cut angles, smooth and rounded per the listing
- Blue anodized 6063 aluminum, with pre-drilled mounting holes
Cons
- No warranty term in the listing
- 3-inch bars suit intersections only, not full-length fences
- No bolt sizes stated
Other machines to compare
Hot Favorable Aluminum 48" T-Track for WoodworkingCheck price on Amazon
HOTTARGET Aluminum 48 Inch T-Track with Wood ScrewsCheck price on Amazon
QWORK Aluminum T TrackCheck price on Amazon
Aluminum 24 Inch T-Track with Wood ScrewsCheck price on Amazon
Aluminum 36 Inch T-Track with Wood ScrewsCheck price on Amazon
Specs compared
| Model | HQ Score | Length | Pack | Profile | Screws | Finish |
|---|---|---|---|---|---|---|
| Hot Favorable 48in | 9.6/10 | 48 in | 6 bars | Double cut | Not included | Black anodized |
| STRONGROWTH 48in | 9.6/10 | 48 in | 4 bars | Double cut | 48 included | Red anodized |
| SeekLiny 12in 4-Pack | 9.6/10 | 12 in | 4 bars | Double cut | 12 included | Black anodized |
| Vibit 12in 2-Pack | 9.5/10 | 12 in | 2 bars | Double cut | 2 per track | Blue anodized |
| HOTTARGET 3in Kit | 9.4/10 | 3 in | 16 bars | Double cut | 32 included | Blue anodized |
Size and performance figures are the brand’s ratings quoted from listings on 3 November 2026. Length is the bar length stated in each listing.
What the listings tell you, and what they leave out
This guide compares 5 aluminum T track listings. All 5 state a double-cut profile in 6063 aluminum, and all 5 state pre-drilled mounting holes. None of the 5 states a warranty term, and none states bolt sizes for every pick: 3 of the 5 give T-bolt and hex bolt sizes, while the HOTTARGET kit and the STRONGROWTH set leave bolt sizes out. Screw counts vary too: 2 of the 5 include screws in the box per track, 1 leaves screws out entirely, and the rest state a box count without a per-track figure.
Treat the spec table with care: where it disagrees with the title and bullets, the title and bullets win, as with the STRONGROWTH length and the HOTTARGET pack count.
Buying guide: choosing the best aluminum t track
Length
48-inch bars cover a full router table fence or a long bench run in a full length; 12-inch bars suit short fences, stops and small jigs; 3-inch bars join tracks at crossings. Match the bar to the run, and check the length the listing states before ordering.
Pack size and screws
Packs here hold 2, 4, 6 or 16 bars. Count the bars the job needs, then check the screws: some sets include screws in the box, and 1 set leaves screws out entirely. The Hot Favorable set recommends 6 x 5/8-inch flat head Phillips deep thread wood screws, 12 per track and 72 per set.
Profile and fit
Every pick here states a double-cut profile. The fit to check is the bolt: 5/16-inch and 1/4-inch T-bolts and 1/4-inch hex bolts appear across 3 of the listings, so measure the bolts and clamps already on the bench before ordering a set that states no sizes.
Finish
All 5 picks state an anodized finish in black, blue or red. The listings describe the anodized surface as corrosion resistant and smooth, and as easy to wipe clean of shop dirt. Color is a shop choice, not a performance claim.
Project Match
- Router table fence: Vibit 12-inch bars, with 2 screws and 2 holes per track, or Hot Favorable 48-inch bars for a full-length fence.
- Drill press table: STRONGROWTH 48-inch bars with screws in the box, or Vibit 12-inch bars for a short table.
- Bench jigs and fixtures: SeekLiny 12-inch bars, with dimensions in inches and millimeters.
- Track crossings: HOTTARGET 3-inch bars, made for intersections.
- Long bench runs: Hot Favorable 48-inch bars, 6 to a set.
How the scores add up
Each pick is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Hot Favorable 48in | 9.6 | 30 | 21 | 21 | n/a | 0 |
| STRONGROWTH 48in | 9.6 | 30 | 21 | 20 | n/a | 0 |
| SeekLiny 12in 4-Pack | 9.6 | 29 | 20 | 20 | n/a | 0 |
| Vibit 12in 2-Pack | 9.5 | 28 | 20 | 19 | n/a | 0 |
| HOTTARGET 3in Kit | 9.4 | 26 | 19 | 18 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What size aluminum T track fits a router table fence?
It depends on the fence length. The picks here run 48 inches, 12 inches and 3 inches long, all 3/4 inch wide and 3/8 inch high, so measure the fence and the table before ordering. The listings state the width and height for every pick.
What bolts fit an aluminum T track?
3 of the listings state 5/16-inch and 1/4-inch T-bolts and 1/4-inch hex bolts. The other listings do not state bolt sizes, so check the listing for the set you buy and measure the bolts already on the bench.
Do aluminum T tracks come with screws?
Most of these do: the SeekLiny, Vibit, STRONGROWTH and HOTTARGET sets include screws in the box. The Hot Favorable set does not, and its listing recommends 6 x 5/8-inch flat head Phillips deep thread wood screws, 12 per track and 72 per set.
Can I join aluminum T tracks at an angle?
The HOTTARGET kit is made for that: 16 short 3-inch bars with CNC-cut angles, for crossings and intersections. Full-length bars suit straight runs instead.
What is a double-cut T track profile?
Every pick here states a double-cut profile, which the listings describe as dual parallel slots that accept several fastener sizes. The Vibit listing states 5/16-inch T-bolts, 1/4-inch T-bolts and 1/4-inch hex bolts in the same slot.
Related: the CNC tooling hub, our best aluminum T track 4 pack 48 inch guide, carbide insert surfacing bits for CNC, and types of CNC machines. Also see our best dado bit for plywood.




