Best Aluminum T Track for Onefinity (2026)
Aluminum T tracks for Onefinity workholding, compared by length, profile, bolt fit, hole spacing and pack contents.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallTaytools 48 Inch T Track9.7/10View on Amazon - 2
Best 36 Inch PackSeekLiny 36 Inch Silver 4 Pack9.6/10View on Amazon - 3
Largest PackZonon 36 Inch T Track 6 Pack9.6/10View on Amazon - 4
Compact PickHOTTARGET 24 Inch T Track 2 Pack9.5/10View on Amazon - 5
QWORK Aluminum T TrackView on Amazon - 6
Aluminum 48 Inch T-Track with Wood ScrewsView on Amazon - 7
Aluminum 36 Inch T-Track with Wood ScrewsView on Amazon - 8
Aluminum 48" T-Track for WoodworkingView on Amazon - 9Aluminum 36" T-Track for WoodworkingView on Amazon
Setting up a CNC table comes down to holding stock flat and steady while the cutter moves, and a slotted aluminum rail gives clamps and stops a place to anchor. This guide compares the best aluminum t track for onefinity workholding, with each listing judged on the length, profile, bolt fit, hole spacing and pack contents it actually states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Taytools 48 Inch T Track: 48 inch precision extruded track with holes every 6 inches and a 3/4 inch by 3/8 inch profile. Check price on Amazon
- Best 36 Inch Pack SeekLiny 36 Inch Silver 4 Pack: 4 silver tracks in 6063 aluminum alloy with 36 screws and stated metric equivalents. Check price on Amazon
- Largest Pack Zonon 36 Inch T Track 6 Pack: 6 blue tracks and 54 screws, with 9 holes per track spaced 4 inches apart. Check price on Amazon
- Compact Pick HOTTARGET 24 Inch T Track 2 Pack: 24 inch blue tracks in a 2 pack with 12 screws for shorter tables and small jigs. Check price on Amazon
Machines on the list
48" Aluminum T Track 3/4" by 3/8"
A 48 inch aluminum track with a 3/4 inch by 3/8 inch profile, thick sidewalls, and countersunk holes for #6 screws.
Pros
- 48 inch length covers a long run without a joint
- 3/4 inch by 3/8 inch profile accepts 1/4 inch hex bolts and 1/4 inch or 5/16 inch T bolts
- Countersunk holes drilled 3 inches from each end and then every 6 inches
- Thick sidewalls that minimize bowing and twisting, per the listing
Cons
- Screws are not included, so mounting hardware must be bought separately
- Unfinished surface, with no anodized coating stated
- A single track per listing, with no pack quantity beyond that
- Manufacturer grade is stated as Grade 2, without further detail
T Tracks Woodworking Aluminum 36 inch Silver 4
A 4 pack of 36 inch silver tracks in 6063 aluminum alloy, with an anodized surface and 36 screws.
Pros
- 36 inch (915 mm) length, 3/4 inch (20 mm) width, 3/8 inch (9.5 mm) height, with metric equivalents stated
- 6063 aluminum alloy with a fine sandblast and anodized surface, stated as corrosion resistant
- Fits 5/16 inch and 1/4 inch T bolts and 1/4 inch hex bolts
- 4 tracks and 36 screws in the set
Cons
- No hole spacing figure is stated
- No weight figure is stated
- No screw length is stated
- No warranty term is stated
Zonon 6 Pcs T Track for Woodworking with Wood
A 6 pack of 36 inch blue tracks with 54 screws and 9 pre-drilled holes per track, for jigs and fixtures.
Pros
- 6 tracks and 54 screws in the box
- 9 pre-drilled holes per track, 4 inches apart
- 36 inch length, 3/4 inch width, 3/8 inch depth, per the title and bullets
- Aluminum alloy stated as durable and corrosion resistant
Cons
- Spec table lists 0.71 inch width and 0.39 inch depth, against 3/4 inch and 3/8 inch in the title and bullets
- No bolt size fit is stated
- No warranty term is stated
- 3.77 pounds for the set
4Pack 36" T-Track for Woodworking Silver
A 4 pack of 36 inch silver double-cut tracks in 6063 aluminum alloy, pre-drilled and anodized.
Pros
- 4 tracks in 6063 aluminum alloy, double cut and pre-drilled
- Fits 5/16 inch and 1/4 inch T bolts and 1/4 inch hex bolts
- Anodized surface, stated as well anodized
- Stated weight of 1.87 pounds
Cons
- Track width and depth are not stated; the listing refers to a picture for size details
- No screw count is stated
- No hole spacing figure is stated
- No warranty term is stated
Aluminum 24 Inch T-Track with Wood Screws
A 2 pack of 24 inch blue tracks in 6063 aluminum alloy, anodized, with 12 screws.
Pros
- 24 inch length suits shorter tables and small jigs
- 6063 aluminum alloy, anodized for rigidity and corrosion resistance
- Pre-drilled mounting holes, 6 screws per track, 12 screws per set
- Frosted anodized surface that does not show dirt easily, per the listing
Cons
- Spec table lists Number of Items as 1, against a 2 pack title and bullets
- No bolt size fit is stated
- Shorter 24 inch length covers less run than the 36 inch and 48 inch options here
- No warranty term is stated
Other machines to compare
QWORK Aluminum T TrackCheck price on Amazon
Aluminum 48 Inch T-Track with Wood ScrewsCheck price on Amazon
Aluminum 36 Inch T-Track with Wood ScrewsCheck price on Amazon
Aluminum 48" T-Track for WoodworkingCheck price on Amazon- Aluminum 36" T-Track for WoodworkingCheck price on Amazon
Specs compared
| Track | HQ Score | Length | Profile | Bolt fit | Pack | Hole spacing |
|---|---|---|---|---|---|---|
| Taytools 48 Inch T Track | 9.7/10 | 48 inch | 3/4 inch by 3/8 inch | 1/4 inch hex, 1/4 inch or 5/16 inch T bolts | 1 track, screws not included | 3 inches from each end, then every 6 inches |
| SeekLiny 36 Inch Silver 4 Pack | 9.6/10 | 36 inch | 3/4 inch by 3/8 inch | 5/16 inch and 1/4 inch T bolts, 1/4 inch hex bolts | 4 tracks, 36 screws | Not stated |
| Zonon 36 Inch T Track 6 Pack | 9.6/10 | 36 inch | 3/4 inch by 3/8 inch | Not stated | 6 tracks, 54 screws | 4 inches apart |
| SeekLiny 36 Inch Double Cut 4 Pack | 9.6/10 | 36 inch | Not stated | 5/16 inch and 1/4 inch T bolts, 1/4 inch hex bolts | 4 tracks | Pre-drilled |
| HOTTARGET 24 Inch T Track 2 Pack | 9.5/10 | 24 inch | 3/4 inch by 3/8 inch | Not stated | 2 tracks, 12 screws | Pre-drilled |
Specifications are manufacturer rated, as published on each listing and collected 24 October 2026.
Choosing the best aluminum t track for onefinity
Length and layout
The picks run in 24 inch, 36 inch and 48 inch lengths. A 48 inch track covers a long run in a single piece, while 36 inch tracks suit parallel slots across a table, and a 24 inch track suits a shorter section or a small jig. None of the listings names a Onefinity mount, so fit here means a universal T slot profile and standard bolt sizes, not a machine-specific bracket. Measure the table and the slot layout before ordering, and plan how many parallel runs the job needs.
Profile and bolt fit
Most picks here share a 3/4 inch by 3/8 inch profile, the size that takes common T bolts and hex bolts. The Taytools and SeekLiny listings state fit for 1/4 inch hex bolts and 1/4 inch or 5/16 inch T bolts, which covers the usual hold-down hardware for a slotted table. The Zonon, HOTTARGET and the second SeekLiny listing do not state a bolt size, so check the hardware on hand against the profile before buying. One SeekLiny listing does not state width or depth at all, and refers the reader to a picture for size details, so do not assume it matches the shared profile.
Holes and mounting
Every pick here arrives with holes already drilled, but the spacing and the screws differ. Taytools drills countersunk holes 3 inches from each end and then every 6 inches, and screws are not included, so mounting hardware must be bought separately. Zonon drills 9 holes per track, 4 inches apart, and includes 54 screws for its 6 tracks. The SeekLiny sets and the HOTTARGET set include screws as well, with 36 screws in the 4 pack, 12 screws in the 2 pack, and 6 screws per HOTTARGET track. Count the holes against the table frame before ordering, since a hole that lands on open space holds nothing.
Pack size and spares
Pack size decides how many slots get fitted in a single order. The Zonon box holds 6 tracks, the SeekLiny boxes hold 4 tracks each, the HOTTARGET box holds 2 tracks, and the Taytools listing holds a single track. A larger pack also leaves spares for a second jig or a replacement section, while a single long track avoids a joint in the middle of a run. Compare the screw counts too, since a pack with tracks but no screws still needs a hardware order.
Project Match
- Jigs and fixtures: the HOTTARGET and Zonon tracks, both described for jigs and fixtures in their listings.
- Router table and drill press table: the Zonon tracks, named for drill press tables and router tables.
- Table saw and miter saw work: the Zonon tracks, described as simple to match with table saws and miter saws.
- Long runs along a table: the Taytools track, at 48 inches, covers more length in a single piece.
- Fitting several slots at once: the SeekLiny 4 packs and the Zonon 6 pack, which cover multiple slots in a single order.
How the scores add up
Each track is scored on performance, build, value, safety and warranty. How we pick explains the weights. A spec the listing does not publish scores nothing, and no listing here states a warranty term or a safety certification, so those parts score nothing across the picks.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Taytools 48 Inch T Track | 9.7 | 32 | 22 | 20 | n/a | 0 |
| SeekLiny 36 Inch Silver 4 Pack | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Zonon 36 Inch T Track 6 Pack | 9.6 | 29 | 20 | 22 | n/a | 0 |
| SeekLiny 36 Inch Double Cut 4 Pack | 9.6 | 29 | 21 | 20 | n/a | 0 |
| HOTTARGET 24 Inch T Track 2 Pack | 9.5 | 28 | 20 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
FAQ: lasers and CNC
What T track profile do these picks share?
Most share a 3/4 inch by 3/8 inch profile. The second SeekLiny listing does not state width or depth, and refers the reader to a picture for size details.
Which bolt sizes fit these tracks?
The Taytools and SeekLiny listings state fit for 1/4 inch hex bolts and 1/4 inch or 5/16 inch T bolts. The other listings do not state a bolt size.
Do the tracks come with screws?
Most do: 36 screws with the SeekLiny 4 pack, 54 screws with the Zonon 6 pack, and 12 screws with the HOTTARGET 2 pack. The Taytools track does not include screws.
Is a Onefinity-specific mount stated?
No. The listings describe universal T track profiles for woodworking, not a mount made for a named machine. Check the slot layout and the bolt sizes against the table before ordering.
Related: best long toggle clamps for cnc, cnc tooling, mdf vs hdpe for cnc and desktop cnc router vs industrial cnc router.
