Best Acetal Sheet (2026)
Five black acetal sheets for CNC, lathe and mill work, compared by thickness, size and what each listing states about the material.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPJTQPUETAZ 1/4 12×129.7/10View on Amazon - 2
Best Thin SheetBaynactic 1/8 in 12×129.6/10View on Amazon - 3
Best Thick BlockDIYDIYSHOP 1 in 8×129.6/10View on Amazon - 4
Best Small SheetDIYDIYSHOP 1/8 in 8×129.6/10View on Amazon
A gear that needs replacing, a bushing that has worn loose, or a small bracket that has to slide without sticking: the job calls for a plastic that machines like metal and keeps its shape. Best acetal sheet is that plastic, sold as Delrin sheet and acetal copolymer sheet, in black, for lathes, mills and CNC routers. This guide compares five sheets on thickness, size and what each listing states about the material.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall PJTQPUETAZ 1/4 12×12: A 1/4 inch sheet, 12 by 12 inches, in high-purity POM resin with stated chemical resistance for industrial machinery parts. Check price on Amazon
- Best Thin Sheet Baynactic 1/8 in 12×12: A 1/8 inch sheet, 12 by 12 inches, in black acetal copolymer for CNC, lathes and precision parts. Check price on Amazon
- Best Thick Block DIYDIYSHOP 1 in 8×12: A 1 inch thick block, 8 by 12 inches, with stated millimeter dimensions for precision parts. Check price on Amazon
- Best Small Sheet DIYDIYSHOP 1/8 in 8×12: A 1/8 inch sheet, 8 by 12 inches, in black POM for machining precision parts and DIY projects. Check price on Amazon
Machines on the list

1/4" Thick Black Acetal Copolymer Plastic Sheet
A 1/4 inch black acetal sheet, 12 by 12 inches, in high-purity POM resin with stated chemical resistance, for industrial machinery parts.
Pros
- High-purity polyoxymethylene resin with stated chemical resistance
- Resistant to acids, alkalis, organic solvents and oil, per the listing
- 1/4 inch thick, 12 by 12 inches, for gears, bearings and sliders
- Wear resistance stated as far superior to ordinary plastics
Cons
- No warranty term is stated
- No laser settings are stated
- No weight is stated
- A single sheet, not a multi-pack

Baynactic Delrin Sheet 1/8"x 12"x 12" Black Acetal
A 1/8 inch black acetal sheet, 12 by 12 inches, in POM copolymer with low friction, for CNC, lathes and precision parts.
Pros
- 1/8 inch thick, 12 by 12 inches, for flat parts and precision work
- Low friction, high strength and hardness, per the listing
- Machinable on lathes, mills, CNC routers and saws
- Good electrical insulation and dimensional stability
Cons
- No warranty term is stated
- No laser settings are stated
- A single sheet, not a multi-pack

Acetal Copolymer Plastic Sheet 1" Thick
A 1 inch thick black POM block, 8 by 12 inches, with stated millimeter dimensions, for machining precision parts, gears and bearings.
Pros
- 1 inch thick, 8 by 12 inches, for parts machined from solid
- Stated millimeter size: 8 inches is 203mm, 12 inches is 305mm, 1 inch is 25mm
- Listed for precision parts, gears, bearings, bushings and electrical insulators
- High rigidity in high temperature water, per the listing
Cons
- No warranty term is stated
- No laser settings are stated
- The listing calls it the hardest among thermoplastics, a marketing claim with no figure
- A single sheet, not a multi-pack

Acetal Copolymer Plastic Sheet 1/8" Thick
A 1/8 inch thick black POM sheet, 8 by 12 inches, with a stated 3mm thickness, for machining precision parts and DIY projects.
Pros
- 1/8 inch thick, 8 by 12 inches, with a stated 3mm thickness
- Listed for machining precision parts, home decor and DIY projects
- High rigidity and hardness, per the listing
- The smallest thin sheet here, for small flat parts
Cons
- No warranty term is stated
- No laser settings are stated
- The bullet text is shared with the 1 inch DIYDIYSHOP listing, so only the size differs
- A single sheet, not a multi-pack

Baynactic Delrin Sheet 1"x 6"x 6" Black Acetal
A 1 inch thick black acetal sheet, 6 by 6 inches, in POM copolymer with low friction, for CNC, lathes and precision parts.
Pros
- 1 inch thick for parts machined from solid
- Low friction, high strength and hardness, per the listing
- Machinable on lathes, mills, CNC routers and saws
- Good electrical insulation and dimensional stability
Cons
- No warranty term is stated
- The smallest sheet here at 6 by 6 inches
- No laser settings are stated
- It shares the part number 150x305x6 with the 1/8 inch Baynactic sheet
Other machines to compare
Baynactic Delrin Sheet 1/8"x 12"x 24" Black AcetalCheck price on Amazon
Baynactic Delrin Sheet 3/8"x 6"x 12" Black AcetalCheck price on Amazon
Baynactic Delrin Sheet 2mm x 6"x12" Black AcetalCheck price on Amazon
Black Delrin/Acetal Copolymer Plastic SheetCheck price on Amazon
Acetal Copolymer Plastic SheetCheck price on Amazon
Specs compared
| Pick | HQ Score | Size | Thickness | Material | Machining | Laser use | Warranty |
|---|---|---|---|---|---|---|---|
| PJTQPUETAZ 1/4 12×12 | 9.7/10 | 12 x 12 in | 1/4 in | POM, high-purity resin | Lathe, mill, CNC router | Not stated | Not stated |
| Baynactic 1/8 in 12×12 | 9.6/10 | 12 x 12 in | 1/8 in | Acetal copolymer, POM | Lathe, mill, CNC router, saws | Not stated | Not stated |
| DIYDIYSHOP 1 in 8×12 | 9.6/10 | 8 x 12 in | 1 in | POM copolymer | Lathe, precision parts | Not stated | Not stated |
| DIYDIYSHOP 1/8 in 8×12 | 9.6/10 | 8 x 12 in | 1/8 in | POM copolymer | Lathe, precision parts | Not stated | Not stated |
| Baynactic 1 in 6×6 | 9.6/10 | 6 x 6 in | 1 in | Acetal copolymer, POM | Lathe, mill, CNC router, saws | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Thickness is the stated sheet thickness; size is the stated sheet size.
What the listings tell you, and what they leave out
All five sheets are black acetal copolymer, also called POM, and all five describe machining on lathes, mills and CNC routers. The thicknesses here are 1/8 inch, 1/4 inch and 1 inch, and the sizes are 12 by 12 inches, 8 by 12 inches and 6 by 6 inches. None of the listings states a warranty term, and none states laser settings: they describe machining, not laser cutting. Two details need a careful read. The Baynactic 1/8 inch listing titles the sheet 1/8 inch thick while its spec table lists 0.12 inches, and both Baynactic listings share the part number 150x305x6, though one is a 1/8 inch 12 by 12 inch sheet and the other is a 1 inch 6 by 6 inch sheet. The two DIYDIYSHOP listings share the same bullet text, so only the size lines separate them.
Best acetal sheet: buying guide
Thickness first
Pick the thickness by the part. A 1/8 inch sheet suits flat parts and thin stock; a 1/4 inch sheet suits sturdier flat parts; a 1 inch block suits parts machined from solid. The listings here give 1/8 inch, 1/4 inch and 1 inch thicknesses, and the DIYDIYSHOP 1/8 inch listing also states 3mm, while the 1 inch listing also states 25mm.
Size against the job
Match the sheet to the part and to the machine bed. The listings here give 12 by 12 inches, 8 by 12 inches and 6 by 6 inches. The DIYDIYSHOP listings also state millimeter sizes: 8 inches is 203mm, 12 inches is 305mm and 1 inch is 25mm.
Copolymer and Delrin names
Delrin is a brand name for acetal: the Baynactic listings call their sheets Delrin sheet and acetal copolymer plate in the same listing, and the other listings call the material POM or polyoxymethylene. The listings describe the same family of plastic under different names, so compare thickness and size, not the name on the label.
Machining, not laser settings
The listings describe machining: lathes, milling machines, CNC router systems, drill presses, miter saws, band saws and hand saws. None states laser settings, so do not expect cutting figures from these listings. If you cut acetal on a laser, vent the fumes outdoors and never leave the machine running unattended. See our Delrin vs acrylic for laser cutting for the comparison.
Acetal machines well, but cutting it makes dust and fumes. Vent fumes outdoors, wear eye protection when machining, and never leave a running laser unattended. Never laser PVC or vinyl.
Project Match
Pair the project with the pick whose listing names that work:
- Precision parts on a lathe: Baynactic 1/8 in 12×12 and Baynactic 1 in 6×6, both listed for lathes and precision parts.
- Gears, bearings and bushings: DIYDIYSHOP 1 in 8×12 and DIYDIYSHOP 1/8 in 8×12, listed for gears, bearings and bushings.
- Industrial machinery parts: PJTQPUETAZ 1/4 12×12, listed for industrial machinery parts and chemical resistance.
- Thin flat parts: Baynactic 1/8 in 12×12 and DIYDIYSHOP 1/8 in 8×12, both 1/8 inch thick.
- Thick parts machined from solid: DIYDIYSHOP 1 in 8×12 and Baynactic 1 in 6×6, both 1 inch thick.
How the scores add up
Each sheet is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A stated thickness, size and use earn performance points; a listing that states neither scores lower. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| PJTQPUETAZ 1/4 12×12 | 9.7 | 32 | 21 | 21 | n/a | 0 |
| Baynactic 1/8 in 12×12 | 9.6 | 30 | 21 | 21 | n/a | 0 |
| DIYDIYSHOP 1 in 8×12 | 9.6 | 30 | 21 | 20 | n/a | 0 |
| DIYDIYSHOP 1/8 in 8×12 | 9.6 | 29 | 20 | 21 | n/a | 0 |
| Baynactic 1 in 6×6 | 9.6 | 29 | 20 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What is acetal sheet?
Acetal sheet is a sheet of POM, or polyoxymethylene, plastic, sold here as Delrin sheet and acetal copolymer sheet, in black, for machining precision parts on lathes, mills and CNC routers.
Is acetal the same as Delrin?
Delrin is a brand name for acetal. The Baynactic listings call their sheets Delrin sheet in the title and acetal copolymer plate in the bullets, and the other listings call the same material POM or polyoxymethylene.
What thickness of acetal sheet should I pick?
The listings here give 1/8 inch, 1/4 inch and 1 inch thicknesses. A 1/8 inch sheet is the thinnest here; a 1 inch block is the thickest. Pick by the part: thin stock for flat parts, a thick block for parts machined from solid.
Can you laser cut acetal?
The listings here do not say. They describe machining on lathes, mills and CNC routers, and none states laser settings. If you cut acetal on a laser, vent the fumes outdoors and never leave the machine running unattended.
Can acetal replace metal parts?
The Baynactic listings say it is an ideal material to replace copper, cast zinc, steel, aluminum and other metallic materials, for sliding parts, bearings, gears and precision parts. The DIYDIYSHOP listings say its mechanical properties are closest to metal among the plastics they describe.
Related: our Delrin vs HDPE for CNC and Delrin vs acrylic for laser cutting, the engraving materials hub, and our acrylic sheets 1/4 inch picks.




