Best 4 Inch Blast Gate (2026)
Blast gates for dust collection, compared by size, material, gate design, seal and weight, with the stated specs and who should skip each.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPOWERTEC 70326 Gate9.7/10View on Amazon - 2
Best Self-CleaningDust Right Ready-Mount9.6/10View on Amazon - 3
Best Sealed EdgeJxnaxvp Aluminum Gate9.6/10View on Amazon - 4
Best Cast AluminumWoodstock W11429.6/10View on Amazon
Sawdust on the floor and a collector that pulls from every machine together means the suction never lands where the cut happens, and a blast gate fixes that by shutting the lines that are not in use.
This guide covers the best 4 inch blast gate, with 5 gates compared by size, material, gate design, seal and weight, and the stated specs for each.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall POWERTEC 70326 Gate: Highest HQ Score here: aluminum body, steel sliding gate, clog-proof grooves, air-leak seal and a locking stop Check price on Amazon
- Best Self-Cleaning Dust Right Ready-Mount: Self-cleaning track clears debris with every close, with an integral wall bracket and reinforced polymer body Check price on Amazon
- Best Sealed Edge Jxnaxvp Aluminum Gate: Aluminum body with a sealed edge design and a grooved sliding gate, for 4 in hoses or pipes Check price on Amazon
- Best Cast Aluminum Woodstock W1142: Cast aluminum body with a steel gate and a locking knob Check price on Amazon
Machines on the list

POWERTEC 70326 Blast Gate 4 Inch
Aluminum blast gate, 4 in, with a steel sliding gate, clog-proof grooves, an air-leak seal and a locking stop.
Pros
- Aluminum body with a premium steel sliding gate
- Clog-proof grooves with easy clearing
- Closed edges to prevent air leaks
- Locking stop for perfect alignment
Cons
- No warranty term is stated
- Hose clamps are required with flexible hose
- Embossed OUT mark must face the dust collector side
- No wall-mount bracket is stated

Rockler 4" Ready-Mount Self-Cleaning Blast Gate
Self-cleaning blast gate, 4 in to 4 in, in reinforced polymer, with an integral wall bracket and a track that clears debris with every close.
Pros
- Self-cleaning track clears debris with every close
- Integral bracket for steady wall mounting
- Reinforced polymer for strength and longevity
- Closes tightly to control airflow
Cons
- No weight is stated
- No dimensions are stated
- No warranty term is stated
- No seal figure is stated

4 Inch Aluminum Blast Gate for Dust Collector
Aluminum blast gate, 4 in, with a sealed edge design and a grooved sliding gate, for 4 in hoses or pipes.
Pros
- Aluminum body for repeated opening and closing
- Sealed edge design to limit air leakage
- Grooved sliding gate for smooth manual operation
- Suits table saws, routers, planers and shop vac setups
Cons
- No warranty term is stated
- No locking stop or knob is stated
- No wall-mount bracket is stated
- No anti-clog groove is stated

Woodstock W1142 4-Inch Aluminum Blastgate
Cast aluminum blastgate, 4 in, with a steel gate and a locking knob.
Pros
- Cast aluminum body with a steel gate
- Locking knob stated on the listing
- 4 in size for dust collection lines
- Package dimensions stated: 6.75 x 5.0 x 2.25 in
Cons
- No weight is stated
- No seal is stated
- No warranty term is stated

POWERTEC 70108 4 Inch Blast Gate for Dust
ABS plastic blast gate, 4 in, with a sliding gate, for 4 in ID dust hoses and ports.
Pros
- Lowest weight stated here at 0.35 lb
- ABS plastic is abrasion resistant for daily wear
- Accepts 4 in ID hose, port or vacuum fitting
- Directs and regulates airflow between machines
Cons
- Requires regular cleaning to prevent clogging and sticking
- Will not connect directly to 4 in OD ports
- No seal is stated
- No warranty term is stated
Other machines to compare
POWERTEC 70295-P2 4-Inch Integrated Blast Gate Clog ResistantCheck price on Amazon
POWERTEC 70108-P6 4 Inch Blast Gate for Dust CollectorCheck price on Amazon
POWERTEC 70135V 4" Blast Gate for Dust CollectorCheck price on Amazon
POWERTEC 70135-P4 4-Inch Aluminum Blast Gate for DustCheck price on Amazon
POWERTEC 70326-P4 Blast Gate 4 InchCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Material | Gate | Seal | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| POWERTEC 70326 Gate | 9.7/10 | 4 in | Aluminum, steel gate | Sliding, locking stop | Closed edges, air-proof | 1.19 lb | Not stated |
| Dust Right Ready-Mount | 9.6/10 | 4 in | Reinforced polymer | Self-cleaning track | Closes tightly | Not stated | Not stated |
| Jxnaxvp Aluminum Gate | 9.6/10 | 4 in | Aluminum | Grooved sliding | Sealed edge | 1.19 lb | Not stated |
| Woodstock W1142 | 9.6/10 | 4 in | Cast aluminum, steel gate | Locking knob | Not stated | Not stated | Not stated |
| POWERTEC 70108 Gate | 9.5/10 | 4 in | ABS plastic | Sliding | Not stated | 0.35 lb | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
What the listings tell you, and what they leave out
All 5 picks are 4 in gates. The 70326 and Jxnaxvp listings state aluminum bodies, the 70108 is ABS plastic, the Dust Right is reinforced polymer and the Woodstock is cast aluminum. Only the 70326 and Jxnaxvp listings state a weight, and the Woodstock spec table lists 2 items while the title names a blastgate. None of the listings states a warranty term.
Buying guide: the best 4 inch blast gate
Size and fit
All 5 gates are 4 in, but the fit differs. The 70108 accepts a 4 in ID hose, with a nominal end at 3-61/64 in OD and 3-3/4 in ID, and will not connect directly to other 4 in OD ports. The 70326 has a tapered OD from 3-3/4 in to 4 in and fits a 4 in ID hose or duct. The Dust Right is a 4 in to 4 in gate, and the Jxnaxvp fits 4 in hoses or pipes. Match the hose before ordering; see the best 4 inch dust collection hose for cnc.
Material and gate design
Aluminum gates dominate here: the 70326, Jxnaxvp and Woodstock are aluminum, with steel sliding gates on the 70326 and Woodstock. The 70108 is ABS plastic and the Dust Right is reinforced polymer. The 70326 has a locking stop for alignment, the Woodstock has a locking knob, and the Dust Right has a self-cleaning track that clears debris with every close.
Seals and air leaks
A gate that leaks air wastes suction. The 70326 has closed edges and an air-proof design, and the Jxnaxvp has a sealed edge design. The Dust Right closes tightly. The 70108 and Woodstock listings state no seal. The 70326 also has an embossed OUT mark that faces the dust collector side for proper hookup.
Clogging and cleaning
Dust builds up in the groove where the gate slides, and the 70108 listing warns that regular cleaning is needed to prevent clogging and sticking. The 70326 has clog-proof grooves and easy clearing, and the Dust Right clears debris from the track with every close. In a busy shop, a self-cleaning or clog-proof track is the practical pick.
Mounting and hookup
The Dust Right has an integral bracket for wall mounting. The 70326 needs hose clamps with flexible hose, and the 70108 needs a Flex Cuff or similar device to connect to a 4 in OD port. For the hose itself, see the best dust collector hose.
Project Match
- Dust collection on a table saw, router or planer: the Jxnaxvp, listed for table saws, routers, planers and shop vac setups.
- A shop that runs 4 in hose: the 70326, with a tapered OD from 3-3/4 in to 4 in and a locking stop for alignment.
- Wall-mounted runs: the Dust Right, with an integral bracket and a self-cleaning track.
- An ABS gate where weight matters: the 70108 at 0.35 lb, the lowest weight stated here.
- Cast aluminum with a locking knob: the Woodstock W1142, with a steel gate.
How the scores add up
The HQ Score weighs performance (size, fit, gate design and seal), build quality (material, gate and construction), value (what the gate includes for the size) and warranty (years and coverage). No listing states a safety feature or a certification, so safety earns no points on any pick. A factor the listing does not state scores no points.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| POWERTEC 70326 Gate | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Dust Right Ready-Mount | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Jxnaxvp Aluminum Gate | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Woodstock W1142 | 9.6 | 28 | 21 | 20 | n/a | 0 |
| POWERTEC 70108 Gate | 9.5 | 28 | 19 | 20 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
What does a blast gate do?
A blast gate opens and closes a dust collection line, directing suction to the machine in use and shutting the lines that are not in use. The 70326 listing states it directs and regulates airflow to exactly where it is needed.
Will a 4 inch blast gate fit my dust hose?
It depends on the hose. The 70108 accepts a 4 in ID hose, with a nominal end at 3-61/64 in OD and 3-3/4 in ID, and will not connect directly to other 4 in OD ports. The 70326 fits a 4 in ID hose or duct, with a tapered OD from 3-3/4 in to 4 in. Check the hose or pipe diameter before ordering.
Do blast gates clog?
Dust builds up in the groove where the gate slides. The 70108 listing warns that regular cleaning is needed to prevent clogging and sticking. The 70326 has clog-proof grooves and the Dust Right clears debris from the track with every close.
Aluminum or plastic blast gate?
Aluminum gates here are the 70326, Jxnaxvp and Woodstock, with steel gates on the 70326 and Woodstock. The 70108 is ABS plastic and the Dust Right is reinforced polymer. Aluminum suits repeated opening and closing in a busy shop; the listings describe the plastic gates as abrasion resistant and built for repeated use.
How do I mount a blast gate?
The Dust Right has an integral bracket for wall mounting. The other listings do not state a mounting method, so check the hose or pipe layout before ordering. The 70326 needs hose clamps with flexible hose.
Related: the best 4 inch dust collection hose for cnc, the best dust collector for desktop cnc, the cyclone vs bag dust collector guide and our cnc tooling hub.




