Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

40wt vs 60wt Embroidery Thread: Which One Should You Buy?

A plain guide to 40wt vs 60wt embroidery thread, with the 4 spools and kits in this guide ranked for lettering, logos, monograms and patches.

40wt vs 60wt Embroidery Thread: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Simthread 40 Colors Polyester Embroidery Machine Thread KitSimthread 40 Colors Polyester Embroidery Machine Thread Kit9.6/10View on Amazon
  2. 2Poolin Embroidery Machine Thread Kit 80 ColorsPoolin Embroidery Machine Thread Kit 80 Colors9.6/10View on Amazon
  3. 3Simthread 63 Colors Embroidery Machine Thread KitSimthread 63 Colors Embroidery Machine Thread Kit9.5/10View on Amazon
  4. 4Poolin Polyester Machine Embroidery Thread 4000M 40WT WhitePoolin Polyester Machine Embroidery Thread 4000M 40WT WhiteView on Amazon
  5. 5Poolin Polyester Machine Embroidery Thread 4000M 40WT BlackPoolin Polyester Machine Embroidery Thread 4000M 40WT BlackView on Amazon
  6. 6New brothread 72 Spools 40WT 100% Frosted Matt EmbroideryNew brothread 72 Spools 40WT 100% Frosted Matt EmbroideryView on Amazon
  7. 7Simthread Embroidery Machine Thread 5000M 40WT PolyesterSimthread Embroidery Machine Thread 5000M 40WT PolyesterView on Amazon
  8. 8BAI Polyester Machine Embroidery ThreadBAI Polyester Machine Embroidery ThreadView on Amazon
  9. 9Poolin Magsnap Prewound Bobbin Thread for Embroidery MachinePoolin Magsnap Prewound Bobbin Thread for Embroidery MachineView on Amazon

Start with the project, not the spool. A design is ready, the fabric is hooped, and the thread in the machine decides whether the lettering reads clean or the fill looks heavy. That choice is the 40wt vs 60wt embroidery thread question, and the short answer is that 40wt is the standard weight for most machine embroidery, while 60wt is the finer weight for small lettering and fine detail. The rest of this guide explains what the wt number means, when each weight earns its place, and which 40wt spools and kits the listings support.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

40wt vs 60wt embroidery thread: what the numbers mean

In the wt system, the higher number names the finer thread. That is the whole difference in one line: 60wt is finer than 40wt, and 40wt is the heavier weight. The listings in this guide state 40wt throughout: New brothread calls 40wt the ideal weight for embroidery machines, Poolin calls 40wt a commonly used thread weight for machine embroidery, and Simthread builds its kit around 40wt polyester. 2 of the listings state the construction as 120D/2 for their 40wt thread.

A finer thread lays a thinner line, so it suits small lettering and fine detail where a heavy thread would crowd the design. A heavier thread lays a fuller line, so it suits lettering, logos, monograms, patches, apparel and home decor where coverage matters. Neither weight is wrong on its own; the design and the size of the lettering decide which one reads better.

When 40wt is the right call

Pick 40wt when the design needs coverage and a smooth, glossy finish. Poolin states that its 40wt polyester delivers a smooth, glossy finish and works for simple designs and detailed stitch work, and the listing names lettering, logos, monograms, patches, apparel, home decor and everyday embroidery projects. Simthread states that its 40wt kit suits dense designs at 600 to 800 RPM, with a recommended needle of NM 75 to 90, and that the thread holds color through repeated washing and bleaching.

Volume matters too. The New brothread huge spool holds 5000M of thread, which the listing states as 5500 yards, and the maker lists more than 1500 colors in stock for single-spool orders. Poolin lists a 4000M spool, stated as 4374 yards. A long spool means fewer spool changes on batch work and long-running designs.

Home-machine owners should plan for one extra item: a thread stand. New brothread states that home-based machine users must use an upright thread stand or holder to feed its 5000M thread properly, and Poolin recommends a thread stand for single-needle home machines for smoother feeding. For the New brothread 5000M spool, the stand is part of the setup, not an optional extra.

When 60wt is the right call

Pick 60wt when the design is small and the thread line itself is part of the problem. Small lettering and fine detail read cleaner with a finer thread, because each stitch takes less room. The listings in this guide are all 40wt, so no 60wt spool is ranked below; the point here is the choice, not a product. If the design is mostly small text, the finer weight is the right starting point, and the 40wt picks below cover the rest of the work.

The setup changes with the weight. A thread stand still helps on a home machine when the spool is large, and the needle follows the weight: Simthread states NM 75 to 90 for its 40wt kit, so a finer weight takes a finer needle.

The gear: 4 40wt spools and kits, ranked

The 4 listings below are all 40wt polyester, ranked by what each listing states: color range, spool length, stated speed, needle guidance and extras such as nets and charts.

Simthread 63-color kit

Simthread takes the top spot because its listing states the most complete picture: 63 colors calibrated to Brother color numbers, 500M of thread per spool, stated as 550 yards, and a recommended needle of NM 75 to 90. The kit lists 2nd-generation Trilobal Polyester, engineered for high-speed work at 600 to 800 RPM, with thread nets included and a full color chart for matching. The maker also states more than 20 years of manufacturing experience and dedicated color-matching support. For a reader who wants one kit for lettering, logos, dense designs and everyday work, this is the most complete listing of the 4.

New brothread 5000M huge spool

The New brothread huge spool is the volume pick: a single spool of white 40wt polyester holding 5000M, stated as 5500 yards, with 120D/2 construction. The listing states color fastness, high strength and a glossy finish, and a suggested average speed of 800 stitches per minute, slowing to around 600 stitches per minute if the thread breaks. The maker lists more than 1500 colors in stock for single-spool orders, with conversion charts for Brother and Madeira colors. The catch is the setup: home-based machine users must use an upright thread stand or holder, and the spool is a single color, so it suits readers who stitch a lot of white.

Poolin 4000M spool

Poolin sits in the middle: a single spool of white 40wt polyester holding 4000M, stated as 4374 yards, made for lettering, logos, monograms, patches, apparel, home decor and everyday embroidery projects. The listing states smooth feeding with stable tension for clean, consistent stitching, and compatibility with single-needle home machines and multi-needle machines. For single-needle home machines the maker recommends a thread stand for smoother feeding. It is the plainest listing of the 4, with no color range or needle guidance stated.

New brothread 40-color kit

The New brothread 40-color kit closes the ranking. It holds 40 spools of 40wt polyester, each 500M, stated as 550 yards, with a color chart for Brother and Madeira conversion. The listing states good tensile strength, with lower risk of breaking or fraying, and good color fastness through commercial laundering and bleaching. 2 points hold it back: the listing states that the kit does not come with a wood rack, and the spec table lists the item count as 0 while the bullets state 40 spools per kit. It still suits readers who want a spread of colors at a modest spool length.

How to choose between 40wt and 60wt

Start from the design. If the lettering is small or the detail is fine, the finer weight gives each stitch more room. If the design needs coverage, a glossy finish and a full line, 40wt is the weight the listings state as standard. When in doubt, match the weight to the smallest lettering in the design: small text points to 60wt; for the rest, start with 40wt.

Then check the setup. A thread stand is required for the New brothread 5000M spool on a home machine and recommended for the Poolin spool on single-needle home machines; the needle needs to match the weight the listing states, and the speed needs to stay inside the range the listing states, such as 600 to 800 RPM for the Simthread kit. The New brothread huge spool suggests 800 stitches per minute, slowing to around 600 if the thread breaks.

Finally, buy for the work ahead. A single large spool suits one color stitched in volume, while a kit suits a spread of colors across many designs.

FAQ: lasers and CNC

Is 40wt or 60wt better for small lettering?

60wt is the finer weight, so it suits small lettering and fine detail where each stitch needs room. 40wt is the standard weight the listings state for general machine embroidery, and it suits lettering, logos, monograms and patches at ordinary sizes. For a design that is mostly small text, start with 60wt; for the rest, 40wt is the right call.

Can I use 40wt thread on a home embroidery machine?

Yes. The listings state that 40wt polyester works on home machines, including single-needle home machines. The home-machine condition the listings state is a thread stand: New brothread states that home-based users must use an upright thread stand or holder with its 5000M spool, and Poolin recommends a thread stand for single-needle home machines.

What needle works with 40wt embroidery thread?

Simthread states a recommended needle of NM 75 to 90 for its 40wt kit. The other listings state no needle size.

How much thread comes on a 40wt spool?

It varies by listing. The New brothread huge spool holds 5000M, stated as 5500 yards; the Poolin spool holds 4000M, stated as 4374 yards; and the kit spools hold 500M each, stated as 550 yards. A kit trades length per spool for color range: 40 colors in the New brothread kit and 63 colors in the Simthread kit.

Does 40wt polyester thread hold up to washing?

New brothread states color fastness, and the 40-color kit states its colors hold up through commercial laundering and bleaching, for workwear, uniforms and linens. Simthread states that its colors hold up through repeated washing and bleaching.

Related: the thread snips pack, embroidery scissors and seam ripper and pointed-tip embroidery scissors guides.

More buying guides

Sewing and Embroidery Machines ·

Best Sewing Machine for Faux Fur (2026)

Four beginner sewing machines compared by stitch range, piercing power, speed control and table support, for sewing thick pile fabric like faux fur.