3M 2091 vs 2097: Which One Should You Buy?
3M P100 filters for dusty workshop jobs, compared on filtration, vapor relief, fit and pack size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
3M 2091 P100 Particulate Filter, 3 Pairs9.7/10View on Amazon - 2
3M Odor/Particulate Filter 2097, P1009.6/10View on Amazon - 3
3M 2097 P100 Particulate Filter with Organic Vapor9.6/10View on Amazon - 4
3M particulate filters P100 #2091/07000 , Pink9.5/10View on Amazon
Sanding, cutting and engraving fill a workshop with fine dust, and a respirator only helps when the filters on it match the job. The air in a maker shop carries wood dust and fine particles from the laser bed, so the filter on the facepiece works hard every session.
This comparison looks at 3m 2091 vs 2097, the 3M P100 filters that turn up on half and full facepieces in laser and CNC shops, and sorts out which filter fits dusty work and which filter adds relief from organic vapors.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick the 3M 2091 for dust alone, and the 3M 2097 when the job also brings organic vapors. Both sides filter particulates at the P100 level, and the 2097 filters add organic vapor relief that the 2091 filters do not state. Choose by what is in the air, not by the pack size.
Machines on the list

3M 2091 P100 Particulate Filter, 3 Pairs
3M 2091 P100 particulate filters in 3 pairs, rated at 99.97% filtration efficiency, with bayonet fit for many 3M half and full facepiece designs.
Pros
- 99.97% particulate filtration efficiency, NIOSH P100
- Bayonet fit for many 3M half and full facepiece designs
- Lightweight, easy-breathing comfort stated by the maker
- 3 pairs in the pack, with spares on hand
Cons
- No organic vapor relief; particulate filtration only
- Covers particulate contaminants only, per the maker
- Service life not stated
- Facepiece not included; filters only

3M Odor/Particulate Filter 2097, P100
3M 2097 P100 filters in 2 pairs, with 99.97% filtration efficiency and organic vapor relief, for 3M 6000, 6500 and 7500 series facepieces.
Pros
- 99.97% filtration efficiency against solids and liquid aerosol
- Organic vapor relief on top of particulate filtration
- Stated fit for 3M 6000, 6500 and 7500 series facepieces
- 2 pairs in the pack, with spares on hand
Cons
- For workplace and occupational use only, per the maker
- Service life not stated
- Facepiece not included; filters only
- 2 pairs; fewer spares than the 3 pairs 2091 pack

3M 2097 P100 Particulate Filter with Organic Vapor
3M 2097 P100 filters with organic vapor relief, in 2 pairs with 4 filters, for 3M half and full face piece designs.
Pros
- Organic vapor relief with P100 particulate filtration
- 2 pairs with 4 filters in the pack
- Fits 3M half and full face piece designs
- Full size, per the maker
Cons
- No warranty term is stated
- Filtration efficiency percentage not stated
- Service life not stated
- Facepiece not included; filters only

3M particulate filters P100 #2091/07000 , Pink
3M 2091 P100 particulate filters in a 2 count pack, NIOSH approved for non-oil based particulates.
Pros
- NIOSH approved P100 filter
- For non-oil based particulates
- Compact pack at 7.0 x 5.1 x 1.0 inches
- 2 count pack for a quick replacement
Cons
- No warranty term is stated
- Filtration efficiency percentage not stated
- Service life not stated
- Facepiece not included; filters only
Side by side
| Product | Side | Filter | Efficiency | Pack | Fit | Weight |
|---|---|---|---|---|---|---|
| 3M 2091 3 Pairs | 2091 | P100 particulate | 99.97% | 3 pairs | Bayonet, many 3M half and full facepiece designs | 0.11 pounds |
| 3M 2097 2 Pairs | 2097 | P100 with organic vapor relief | 99.97% | 2 pairs | 3M 6000, 6500 and 7500 series | 0.12 pounds |
| 3M 2097 4 Filters | 2097 | P100 with organic vapor relief | Not stated | 2 pairs (4 filters) | 3M half and full face piece designs | Not stated |
| 3M 2091 2 Count | 2091 | P100 particulate | Not stated | 2 count | Not stated | 1 lb |
Size and performance figures are the brand’s ratings quoted from listings on 14 November 2026.
3m 2091 vs 2097: what separates the filters
The split is simple. The 2091 is a particulate filter, and the 2097 is a particulate filter with organic vapor relief. The 2097 filters state P100 filtration plus relief from organic vapors, while the 2091 3 Pairs filter states P100 filtration of oil and non-oil based particulate contaminants with no vapor relief stated, and the 2091 2 Count filter states filtration for non-oil based particulates only. For dust alone, both sides state P100 particulate filtration; the 2097 earns its place when the air also carries vapors.
Pack sizes differ too. The 2091 side offers a 3 pairs pack and a 2 count pack, while the 2097 side offers 2 pairs packs, with the 2097 4 Filters pack holding 4 filters. The 2097 2 Pairs filter names the 3M 6000, 6500 and 7500 series facepieces, and the 2091 3 Pairs filter states bayonet fit for many 3M half and full facepiece designs.
Filtration
Filtration is where the sides look closest. The 2091 3 Pairs filter and the 2097 2 Pairs filter both state 99.97% filtration efficiency, and the 2091 3 Pairs filter states NIOSH P100 approval with protection against oil and non-oil based particulate contaminants. The 2091 2 Count filter states NIOSH approval and filtration for non-oil based particulates, without stating an efficiency percentage. The 2097 4 Filters filter states P100 filtration with organic vapor relief, also without a percentage.
P100 is the filter class, and 99.97% is the efficiency figure where stated. For dusty laser and CNC work, a P100 filter is the class to look for; see the dust mask vs respirator for laser engraving guide for how masks and respirators differ.
Fit
A filter only works when it seals to the facepiece, so fit statements matter. The 2091 3 Pairs filter states bayonet compatibility with many 3M half and full facepiece designs. The 2097 2 Pairs filter names the 3M 6000, 6500 and 7500 series. The 2097 4 Filters filter states use with 3M half and full face piece designs. The 2091 2 Count filter states no fit, so check the facepiece before ordering.
Packs and sizes
Pack sizes run from a 2 count pack to a 3 pairs pack, and each 2097 pack holds 2 pairs, with the 2097 4 Filters pack holding 4 filters. Spare filters matter when a job runs long, and the 3 pairs pack is the largest pack here.
The 2091 3 Pairs filter states 0.11 pounds and 8.0 x 8.0 x 8.0 inches. The 2091 2 Count filter states a weight of 1 lb and dimensions of 7.0 x 5.1 x 1.0 inches. The 2097 2 Pairs filter states 0.12 pounds and 2.45 x 7.8 x 6.05 inches. The 2097 4 Filters filter states 6.0 x 7.3 x 1.5 inches and no weight.
Choose the 3M 2091 if
- You want the 2091 3 Pairs filter, with a stated 99.97% efficiency figure.
- You want the largest pack in this comparison, with 3 pairs.
- You want the 2091 3 Pairs filter, with bayonet fit for many 3M half and full facepiece designs.
Choose the 3M 2097 if
- You want organic vapor relief on top of P100 particulate filtration.
- You want the 2097 2 Pairs filter, with a stated fit for the 3M 6000, 6500 and 7500 series facepieces.
- You want the 2097 4 Filters pack, with 2 pairs and 4 filters.
Filters protect only when they fit the facepiece and seal to the face. Match the filter to the facepiece series, change filters when breathing gets harder or odors break through, and ventilate the workspace. See the fume extractor vs exhaust fan for laser engraver guide for workshop air.
Project Match
Match the filter to the project:
- Dusty work with particulates only: the 3M 2091 3 Pairs filter, with P100 particulate filtration and a stated 99.97% efficiency figure.
- Work with organic vapors in the air: the 3M 2097 filters, with P100 filtration plus organic vapor relief.
- Work on 3M 6000, 6500 and 7500 series facepieces: the 3M 2097 2 Pairs filter, which names those series.
- A quick filter change: the 3M 2091 2 Count filter, in a 2 count pack.
FAQ: lasers and CNC
What is the difference between the 3M 2091 and 2097?
The 2091 is a P100 particulate filter, and the 2097 is a P100 particulate filter with organic vapor relief. Both sides filter particulates at the P100 level; only the 2097 filters state relief from organic vapors.
Can 2091 or 2097 filters be used for laser engraving dust?
Both are P100 particulate filters, and the 2091 3 Pairs filter states 99.97% filtration efficiency with NIOSH P100 approval. Fit matters as much as filtration, so match the filter to the facepiece.
Do 2091 and 2097 filters fit the same facepieces?
Fit is stated per filter, not per side. The 2091 3 Pairs filter states bayonet compatibility with many 3M half and full facepiece designs, the 2097 2 Pairs filter names the 3M 6000, 6500 and 7500 series, and the 2097 4 Filters filter states use with 3M half and full face piece designs. The 2091 2 Count filter states no fit.
How many filters come in a pack?
Pack sizes differ. The 2091 side offers 3 pairs and a 2 count, and each 2097 pack holds 2 pairs, with the 2097 4 Filters pack holding 4 filters.
Are 2091 and 2097 filters reusable?
No service life or reuse limit is stated for these filters. Change filters when breathing gets harder or, for the 2097, when odors break through.
Related: dust mask vs respirator for laser engraving, PAPR vs half mask respirator for CNC, fume extractor vs exhaust fan for laser engraver and laser safety glasses vs regular safety glasses.




