Types of Toggle Clamps for Workholding
Horizontal, vertical, push-pull, hook and latch toggle clamps explained, with the holding capacities and sizes the makers list, so you can match the clamp to the jig.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
POWERTEC 4PK Toggle Clamp9.7/10View on Amazon - 2
BESSEY STC-HH70 Horizontal Auto-Adjust Toggle Nickel Plated9.7/10View on Amazon - 3
POWERTEC 4PK Push Pull Toggle Clamp9.6/10View on Amazon
Types of toggle clamps differ in how the handle moves and where the clamping force lands. A toggle clamp locks a workpiece against a jig, a fixture, a bench or a machine table with a quick flip of the handle, and the handle stays locked until it is flipped back. The main families are horizontal hold-down, vertical hold-down, push-pull, and hook and latch. Each family suits a different shape of workpiece and a different direction of force, so the choice starts with the job.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Holding capacity is a maker-rated maximum, not a measured result and not the force on every job. The spindle setting decides the force on the workpiece, and the pad must sit flat. Clamping force and holding capacity are different figures: the BESSEY STC-VH50 (on Amazon) lists an applied clamping force from 25 to 250 lbs with a max holding capacity of 450 lbs.
Types of toggle clamps at a glance
| Type | Handle and motion | Maker-rated holding capacity | Models |
|---|---|---|---|
| Horizontal hold-down | Handle sits low and pulls the arm down | 60 lbs, 360 lbs, 500 lbs | 201-B, 201-L, 225D |
| Vertical hold-down | Handle stands upright and pulls the arm down | 220 lbs, 450 lbs | 201C, STC-VH50 |
| Push-pull | Handle drives a plunger straight in and out | 110 lbs, 300 lbs | 302F, GLSJA push-pull |
| Hook and latch | Handle pulls a hook or latch closed | 375 lbs | J hook |
The table lists the capacities the makers state for the models named.
Horizontal hold-down toggle clamps
The horizontal hold-down is the common bench clamp: the handle rests low beside the base, the arm swings down onto the workpiece, and the clamp locks with the handle near the bench surface. Makers list this style as model 201-B, model 201-L and model 225D, with holding capacities of 60 lbs, 360 lbs and 500 lbs.
JMIATRY lists a 12-piece set of model 201-B horizontal clamps with a holding capacity of 163 kg, or 360 lbs, and an arm that opens 85 degrees while the handle moves 80 degrees. The clamps are cold-rolled carbon steel with a zinc plated coating. The hole size is 6 mm, and the clamp installs with M4 or M5 screws, which the package does not include.
Acrux7 lists a 16-piece set of small model 201-L horizontal clamps with a holding capacity of 60 lbs, or 27 kg. The clamp measures 3.1 inches by 0.9 inches by 0.7 inches, the handle opens 75 degrees and the bar opens 90 degrees, and the black rubber pressure head adjusts and resists slipping.
CUKAYO lists a 4-piece set of model 225D horizontal clamps with a holding capacity of 500 lbs. POWERTEC lists a single model 225D clamp with the same capacity.
Vertical hold-down toggle clamps
The vertical hold-down works the same way as the horizontal style, with the handle standing upright instead of lying low. That upright handle suits jigs where the bench beside the clamp is crowded, or where the hand comes down from above.
BNYZWOT lists a 4-piece set of model 201C vertical clamps with a holding capacity of 100 kg, or 220 lbs. The handle opens 87 degrees and the bar opens 79 degrees, and each clamp weighs 130g.
BESSEY lists the STC-VH50 vertical auto-adjust clamp, which adjusts itself to variations in workpiece dimensions while holding a constant clamping force. The adjustment screw sets an applied clamping force from 25 to 250 lbs, with a max holding capacity of 450 lbs. The clamp measures 4.57 inches by 2.36 inches by 6.38 inches and carries a 1 year warranty against manufacturing defects.
Push-pull toggle clamps
The push-pull clamp moves a plunger in a straight line instead of swinging an arm. The handle drives the plunger forward to press the workpiece and pulls it back to release it, which suits workpieces that need holding from the side or in a vertical position. Push clamps work differently; see push clamps vs toggle clamps for CNC.
POWERTEC lists the model 302F push-pull clamp with a holding capacity of 136 kg, or 300 lbs. The overall size is 160 by 55 by 85 mm, or 6.3 inches by 2.2 inches by 3.3 inches, the screw thread is 8 by 29 mm, and the plunger stroke is 32 mm, or 1.3 inches. The clamp comes with an adjustable M8 screw and bolt and a flanged base.
GLSJA lists an 8-piece set with 4 hold down clamps and 4 push pull clamps. The push pull clamp in the set holds 110 lbs, and the set suits light duty work with fast loading and unloading.
Hook and latch toggle clamps
The hook and latch family pulls parts together instead of pressing down from above. A hook or latch catches a loop, a hasp or a strike plate, and the handle draws it tight.
QWORK lists a 4-pack of J hook toggle clamps with a load capacity of 375 lbs, or 170 kg, and an adjustable drawbar. The clamp uses a hook-type pull lock with straight pulling action, and the U-shaped clamping profile mounts on the side with compression.
How to pick the right type
Start with the direction of the force. A hold-down clamp presses from above, so it suits flat work on a jig or a bench. A push-pull clamp presses from the side or holds a workpiece upright. A hook or latch clamp pulls a closing part shut. Then check the holding capacity against the job: capacities run from 60 lbs on the small Acrux7 201-L (on Amazon) to 500 lbs on the 225D models.
Then check the fit. The 201-B installs with M4 or M5 screws through a 6 mm hole, the POWERTEC 225D mounts through slots of 1/4 inch by 3/8 inch, and the POWERTEC 302F (on Amazon) comes with an M8 screw and bolt. The BESSEY STC-VH50 measures 4.57 inches by 2.36 inches by 6.38 inches. A clamp that cannot bolt down where it needs to sit will not hold, whatever its capacity.
For a CNC router jig, CUKAYO lists the 225D for CNC router work, and POWERTEC lists the 302F for CNC. The best mini toggle clamp for CNC guide lists small clamps for tight jigs. Match the clamp to the jig, then to the capacity.
FAQ: lasers and CNC
What is the difference between a horizontal and a vertical toggle clamp?
The handle position is the difference. On a horizontal clamp the handle rests low beside the base, as on the 201-B and the 201-L, while on a vertical clamp the handle stands upright, as on the 201C. Both press the arm down onto the workpiece, and both lock the same way.
What holding capacities do toggle clamps come in?
Makers state holding capacities of 60 lbs, 110 lbs, 220 lbs, 300 lbs, 360 lbs, 375 lbs, 450 lbs and 500 lbs. The small Acrux7 201-L holds 60 lbs and the POWERTEC 302F holds 300 lbs.
What is a push-pull toggle clamp used for?
A push-pull clamp holds a workpiece from the side or in a vertical position. The handle drives a plunger straight forward to press the workpiece and pulls it straight back to release it. The POWERTEC 302F has a plunger stroke of 32 mm, or 1.3 inches.
What screws do toggle clamps need?
It depends on the model. The 201-B installs with M4 or M5 screws through a 6 mm hole, and the package does not include screws. The POWERTEC 302F comes with an adjustable M8 screw and bolt. The POWERTEC 225D mounts through slots of 1/4 inch by 3/8 inch spaced 7/8 inch by 7/8 inch.
Do toggle clamps come with a warranty?
The BESSEY STC-VH50 lists a 1 year warranty against manufacturing defects. No other clamp in this guide states a warranty term, so check the warranty line on the clamp you buy before ordering.
Can one toggle clamp replace several sizes?
The BESSEY STC-VH50 auto-adjust clamp can. It adjusts itself to variations in workpiece dimensions while holding a constant clamping force, and the maker says one clamp can replace a range of competitive clamps. The adjustment screw sets an applied clamping force from 25 to 250 lbs.
Related: CNC tooling, push clamps vs toggle clamps for CNC, best mini toggle clamp for CNC, best long toggle clamps for CNC and best aluminum T track.




