How to Do Stained Glass: Tools and Steps
How to do stained glass: score and break the glass, wrap the edges in copper foil, and solder the joints into a panel that hangs in a window.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Ecoofor Stained Glass Starter Kit9.6/10View on Amazon - 2
Stained Glass Kits for Adults Complete Stained9.6/10View on Amazon - 3
Rizom Glass Cutting Tool, Glass Cutter 2-20MM9.5/10View on Amazon - 4
LemonRoad 1 Set Blue Lotus Flower Pre Cut Stained9.4/10View on Amazon
A stained glass suncatcher starts as colored glass, copper foil and solder, and ends as a panel that catches light in a window. How to do stained glass with the copper foil method comes down to scoring glass to shape, wrapping the edges in copper foil, and soldering the joints into a finished panel. The sections below walk through the stages in order, then match the gear to each stage. See the pottery and glass hub for more glass guides.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
A kit below includes solder made with lead. Lead solder is not for food-contact items. Work with ventilation, wear eye protection, and solder on a heat-proof surface.

Ecoofor Stained Glass Starter Kit
A 31-piece stained glass starter kit with a 100W temperature-display iron, cutting tools and safety gear.
Pros
- 100W iron with a temperature display and a 180-500°C range
- 31-piece kit covers scoring, cutting, grinding and soldering
- 2 rolls of 40% tin and 60% lead solder
- Gloves, safety glasses and a protective mask included
Cons
- No glass pieces in the box
- Lead solder is not for food-contact items
- No copper foil tape listed
- No pattern sheet listed in the box

Stained Glass Kits for Adults Complete Stained
A stained glass starter kit with an 80W soldering iron, an oil-fed glass cutter and 7mm copper foil tape.
Pros
- 80W iron with 180-480°C adjustable temperature and 5 tips
- Oil-fed cutter with heads for 2-6mm, 6-12mm and 12-20mm glass
- 2 rolls of 7mm copper foil tape and a bone folder tool
- 2 anti-cutting gloves in the box
Cons
- No warranty term is stated
- No solder wire listed
- No flux listed
- No glass pieces in the box

Rizom Glass Cutting Tool, Glass Cutter 2-20MM
A 13-piece glass cutting kit with 8-inch running pliers, 6-inch breaker grozer pliers and heads for 2mm to 20mm glass.
Pros
- 3 cutter heads cover glass from 2mm to 20mm thick
- 8-inch running pliers and 6-inch breaker grozer pliers in carbon steel
- Oil-feed cutter keeps the wheel lubricated while cutting
- 1 year manufacturer warranty
Cons
- No soldering iron in the box
- No solder, flux or copper foil listed
- No glass pieces in the box
- No safety glasses or gloves listed

LemonRoad 1 Set Blue Lotus Flower Pre Cut Stained
A pre-cut lotus flower stained glass kit with 12 glass pieces, solder wire and a pattern sheet.
Pros
- 12 pre-cut lotus flower glass pieces, ready to assemble
- 1 roll of 50g solder wire, 1.5mm diameter
- Flux brush, burnishing tool, jump rings, metal chains and pattern sheet included
- Finished suncatcher measures 6.5 by 4.9 inches
Cons
- No warranty term is stated
- Soldering iron sold separately
- Lotus design only
- No copper foil tape listed
How to do stained glass: the stages in order
Start with a pattern and a plan for the pieces. A pre-cut kit starts at the foil stage, while a tool kit starts by cutting the glass. After the glass is shaped, the work runs in the same order: foil, solder, then clean and hang.
Score and break the glass
Score the glass with a firm pass of the cutter, then break it along the score with running pliers. The Rizom and Wexytho cutter (on Amazon) heads fit glass from 2mm to 20mm thick, so match the head to the glass in hand. An oil-feed cutter keeps the wheel lubricated while cutting. For a closer look at cutters, see the best stained glass cutter guide.
Foil the edges and solder the joints
Wrap the cut edges in copper foil tape, then press the foil flat with a bone folder tool. The foil gives the solder something to grip. Heat the iron, touch the tip to the joint and feed in solder wire until it flows. Two kits below include irons, rated at 80W and 100W, with temperature ranges of 180-480°C and 180-500°C. For iron options, see the best soldering iron for stained glass guide.
Work safely: ventilation, eye protection and a heat-proof surface
Soldering fumes need fresh air, so work near an open window or with ventilation that moves fumes away. Wear safety glasses and gloves while cutting and soldering, and rest the iron on a heat-proof surface. Lead solder is not for food-contact items, so keep food and drink away from the bench. For fume control, see the fume extractor for soldering guide.
Stained glass gear for this project
The cutting stage needs a cutter and pliers, the soldering stage needs an iron and solder, and the lotus kit skips the cutting stage with pre-cut pieces.
FAQ: lasers and CNC
Do I need a soldering iron to do stained glass?
Yes, for the copper foil method in this guide. The Wexytho kit includes an 80W iron and the Ecoofor kit (on Amazon) a 100W iron. The LemonRoad and Rizom kits need an iron bought separately.
What thickness of glass can these cutters handle?
The Rizom and Wexytho kits include cutter heads for 2-6mm, 6-12mm and 12-20mm glass, so match the head to the glass in hand.
Can I use lead solder for a stained glass mug or plate?
No. Lead solder is not for food-contact items. Keep it to window panels and suncatchers that never touch food or drink.
How big is the finished lotus suncatcher?
The finished lotus suncatcher measures 6.5 inches wide by 4.9 inches high, from 12 pre-cut pieces and a pattern sheet.
What safety gear should I wear for stained glass?
Wear safety glasses and gloves while cutting and soldering, and work with ventilation. The Ecoofor kit includes gloves, safety glasses and a protective mask, and the Wexytho kit 2 anti-cutting gloves.
Do any of these kits include glass pieces?
Only the LemonRoad kit (on Amazon) lists glass pieces in the box: 12 pre-cut lotus flower pieces. The other kits list tools only.
Related: the pottery and glass hub, best stained glass cutter, best stained glass grinder and best soldering iron for stained glass.




