Soldering Iron Tips: Types and How to Choose
Soldering iron tips come in conical, chisel, bevel and knife shapes, and the right one depends on the joint, the station fit and the work at hand.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
HANGLIFE 900M Soldering Iron Tips for Hakko9.6/10View on Amazon - 2
900M Soldering Iron Tips for HAKKO 936,937,9079.6/10View on Amazon - 3
10 Pcs 900M Soldering Iron Tips9.6/10View on Amazon
A joint that will not wet, a pad that lifts, a wire that will not stay put: the tip is often where the trouble sits, not the iron. Soldering iron tips are the replaceable ends that carry heat from the iron to the joint, and the shape of that end decides how heat reaches the work. A fine conical tip suits a small pad, a chisel tip suits a wider joint, and a tip that does not fit the station suits nothing at all. This guide explains the shapes, the fit and the sets, so the next tip on the bench matches the work in front of it.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
| # | Product | HQ Score | Buy |
|---|---|---|---|
| 1 | HANGLIFE 900M Soldering Iron Tips for Hakko | 9.6/10 | Buy on Amazon |
| 2 | 900M Soldering Iron Tips for HAKKO 936,937,907 | 9.6/10 | Buy on Amazon |
| 3 | 10 Pcs 900M Soldering Iron Tips | 9.6/10 | Buy on Amazon |

HANGLIFE 900M Soldering Iron Tips for Hakko
A 12-piece 900M tip set in purple copper with multi-layer plating, covering conical, knife, beveled and chisel shapes for 900M stations.
Pros
- 12 pieces covering conical, knife, beveled and chisel shapes
- Purple copper, multi-layer plated for rapid heat transfer
- Fits 900M stations: 936, 937, 907, 938, 969, 8586 and 852D
- Chisel tips from 0.8D to 2.4D cover fine work and wider joints
Cons
- No warranty term is stated
- Only fits stations that accept 900M series tips
- The largest chisel tip is 2.4D
- Fit depends on matching the old tip, so check the size guide first

900M Soldering Iron Tips for HAKKO 936,937,907
A 10-piece 900M-T tip set with 10 different shapes, electroplated for 72 hours, for 900M stations.
Pros
- Electroplated for 72 hours to resist oxidation
- 10 different shapes, from the 900M-T-I tip to the 2.4D chisel
- Fits 900M stations: 936, 937, 907, 913, 951, 898D, 852D+ and 878AD
- Knife, bevel and chisel shapes suit varied joints
Cons
- Does not fit the Hakko 908 iron or the 900s iron
- Does not fit the X-Tronic 3010-XTS
- Fewer pieces than the 12-piece set in this guide
- The largest chisel is 2.4D

10 Pcs 900M Soldering Iron Tips
A 10-piece 900M-T tip set in purple copper alloy with electroplating, sized from 900M-I to 900M-3.2D, for 900M stations.
Pros
- Purple copper alloy for rapid heat conduction
- Sizes from 900M-I to 900M-3.2D cover fine and larger work
- Electroplating resists corrosion, rust and oxidation
- Fits Hakko, Atten, Quick, Aoyue, Yihua, Vastar and more
Cons
- No warranty term is stated
- Fewer pieces than the 12-piece set in this guide
- Compatibility is named by brand, so confirm the 900M-T fit first
- The widest tip is 3.2D
Soldering Iron Tip Shapes and What Each One Does
Conical, chisel, bevel and knife shapes cover most bench work. The sets in this guide carry these shapes, in sizes from the fine 900M-T-I tip to the 3.2D chisel. Conical tips, marked I, B and IS in the Hanglife set, suit fine joints and small pads. Chisel tips, marked with D sizes such as 0.8D, 1.2D, 1.6D, 2.4D and 3.2D, suit wider joints, where a flat face moves heat across more metal. Beveled tips, marked 2C, 3C, 4C, C3 and C4, suit joints that need heat on an edge, and knife tips, marked K and SK, suit work across a row of pins.
Shape alone does not pick the tip: the station must accept the 900M series, and the tip must match the joint in front of it.
How to Choose Soldering Iron Tips
Start with fit. Every set in this guide is built for the 900M series, and the listings name the stations they suit: Hakko 936, 937, 907, 938, 969, 8586 and 852D, plus 933, 376, 913, 951, 898D, 852D+ and 878AD in the ShineNow list. The Hanglife listing also names Radio Shack 64-053, Atten, Quick, Aoyue, Yihua, X-Tronic, Vastar, Sywon, Tabiger, SOAIY and SEALODY. If the station is not on the list, compare the old tip with the size guide on the listing page.
Next, look at material and finish. The Hanglife and Siziviki sets use purple copper, which the makers state for rapid heat transfer, and the ShineNow set is electroplated for 72 hours. The Hanglife set adds multi-layer plating and polishing, while the Siziviki set states electroplating for resistance to corrosion, rust and oxidation. The Hanglife set is built with lead-free materials. The Hanglife set holds 12 tips; the ShineNow and Siziviki sets hold 10 each.
Ventilation and a heat-proof surface matter whenever solder work runs, and eye protection belongs on the bench. Lead solder is not for food-contact items. For more on the wider bench, see the soldering category.
Soldering Iron Tips for Electronics Work
The shapes above decide the joint, and the sets below put those shapes on the bench: each one covers the 900M fit, so the choice comes down to piece count, shape range and finish.
Caring for Soldering Iron Tips
A tip lasts longer when it stays tinned and clean. The Siziviki listing describes a smooth tinning process with clean solder flow, and the ShineNow listing ties its 72-hour electroplating to oxidation resistance. Keep a coat of solder on the working face and store the tips where they do not knock against each other. When a tip stops wetting, clean it and re-tin it first; if it still will not wet, swap in a fresh tip from the set.
FAQ: lasers and CNC
What soldering iron tip shape should a beginner start with?
Start with a conical tip for fine joints and a chisel tip for wider joints. The sets in this guide carry both, with chisel sizes from 0.8D to 3.2D.
Do 900M soldering iron tips fit a Hakko 936?
Yes. The Hanglife and ShineNow listings both name the Hakko 936 among the compatible models, along with 937 and 907.
How many tips come in a set?
The Hanglife set holds 12 pieces, and the ShineNow and Siziviki sets hold 10 pieces each. The Hanglife set lists conical, knife, beveled and chisel shapes.
What are soldering iron tips made of?
The Hanglife and Siziviki sets state purple copper, with multi-layer plating on the Hanglife set and electroplating on the Siziviki set. The ShineNow set states electroplating for 72 hours.
Do these tips fit a Hakko 908?
The ShineNow listing states its tips do not fit the Hakko 908 iron or the 900s iron. The other listings name 900M series fit without naming the 908, so check the station model before ordering.
How do I know if a tip fits my station?
Check that the station accepts 900M series tips, then compare the old tip with the size guide on the listing page, checking the outer and inner diameter and the length.
Related: the electronics making hub, best soldering iron for beginners and best soldering flux for electronics. Also see the best soldering iron kit.




