Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Ring Blank Size Chart for Laser Engraving

A ring blank size chart matching US sizes 6 to 12 to inner diameters, with three stainless steel blank sets for laser-engraved rings.

Ring Blank Size Chart for Laser Engraving
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 118PCS Stainless Steel Blank Core Ring 8mm Plain18PCS Stainless Steel Blank Core Ring 8mm Plain9.7/10View on Amazon
  2. 233PCS 7 Size Stainless Steel Finger Ring Blank US33PCS 7 Size Stainless Steel Finger Ring Blank US9.7/10View on Amazon
  3. 3Ring Blanks, 14 Pcs Stainless Steel Finger RingsRing Blanks, 14 Pcs Stainless Steel Finger Rings9.6/10View on Amazon

Engraved rings sell when the blank fits the finger it was made for, and a ring blank size chart is the map between a US ring size and the inner diameter of the blank. Match the size on the order to the inner diameter the maker publishes for that size, and check the width before engraving, since a narrow band leaves less room for a design. The chart below collects the inner diameters the Happtkey set publishes, size by size.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

18PCS Stainless Steel Blank Core Ring 8mm Plain

18PCS Stainless Steel Blank Core Ring 8mm Plain

Happtkey9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

18 stainless steel ring blanks in US sizes 6 to 11, 8 mm wide, with inner diameters from 16 mm to 21 mm.

Pros

  • Inner diameters listed for every size, 16 mm to 21 mm
  • 8 mm wide band with a beveled edge and polished inner face
  • 3 blanks per size, 18 pieces in the set
  • Stainless steel, anti-rust and anti-oxidant, hypoallergenic

Cons

  • No warranty term is stated
  • Sizes stop at US 11, with no size 12 in the set
  • 8 mm width only; no narrower band in the set
  • Only 3 blanks per size for a single size
33PCS 7 Size Stainless Steel Finger Ring Blank US

33PCS 7 Size Stainless Steel Finger Ring Blank US

Starry9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

33 stainless steel grooved ring blanks in US sizes 6 to 12, 8 mm wide, with a storage box included.

Pros

  • Stainless steel, anti-rust and anti-oxidation, with a polished inner surface
  • 33 pieces: 5 per size, 3 of size 12
  • 8 mm grooved core for inlay work with resin or stones
  • Plastic storage box included

Cons

  • No warranty term is stated
  • 8 mm width only; no narrower band in the set
  • Only 3 blanks of size 12 in the set
  • No size above US 12 in the set
Ring Blanks, 14 Pcs Stainless Steel Finger Rings

Ring Blanks, 14 Pcs Stainless Steel Finger Rings

FdcLixuvol9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

14 black stainless steel grooved ring blanks in US sizes 6 to 12, 2 per size, for inlay and engraving.

Pros

  • Grooved core for inlay with crystals, rhinestones, resin or sequins
  • 2 blanks per size across US 6 to 12
  • Stainless steel, anti-rust and resistant to oxidation
  • 3-month warranty stated

Cons

  • No inner diameters are published for any size
  • Black finish only in this set
  • 2 per size limits spares for a single size
  • Warranty runs only 3 months

Ring blank size chart

The chart lists the inner diameters the Happtkey set publishes, size by size. The Happtkey set covers sizes 6 to 11. The FdcLixuvol set lists sizes without inner diameters, so it does not appear in the chart. The Starry set publishes its own inner diameters for each size.

US size Happtkey inner diameter
6 16 mm (0.63 in)
7 17 mm (0.67 in)
8 18 mm (0.71 in)
9 19 mm (0.75 in)
11 21 mm (0.83 in)

Use the figure from the set you buy. A blank that measures smaller than the finger size will not fit, and a blank that measures larger will slip.

How to read the chart

Start from the US size on the order, then read across to the inner diameter for that size. The inner diameter is the distance across the inside of the ring, and it decides whether the blank slides on and stays put. Measure a blank from your own set before engraving a sized order, and compare the figure with the chart.

Check the width next. The Happtkey and Starry blanks are 8 mm wide, which leaves room for a name or a short line of text around the band. The FdcLixuvol and Starry blanks are grooved, so the groove carries inlay material such as resin, rhinestones or mini pearls. The Happtkey blank is a plain solid band, so the band carries the engraved words.

Ring blanks for the chart

Use the chart above to find the inner diameter, then pick the set below that covers the sizes you sell.

FAQ: lasers and CNC

What inner diameter is a US size 8 ring blank?

The Happtkey set lists 18 mm, or 0.71 in, for US size 8. The Starry set lists its own inner diameter for size 8. The FdcLixuvol set lists the size without an inner diameter.

Can I laser engrave words on a ring blank?

Yes. The Happtkey blanks take engraved words and patterns, and the Starry blanks take laser-engraved words and names. The FdcLixuvol blanks (on Amazon) take engravings for gifts. Keep the design inside the 8 mm width on the Happtkey and Starry blanks.

What width are these ring blanks?

The Happtkey and Starry blanks are 8 mm wide, or 0.31 in. The FdcLixuvol width is Not stated.

How many blanks come in each set?

The FdcLixuvol set holds 14 blanks, the Happtkey set holds 18, and the Starry set holds 33. The FdcLixuvol set has 2 per size, the Happtkey set has 3 per size, and the Starry set has 5 per size, with 3 of size 12.

Do these ring blanks come with a warranty?

The FdcLixuvol set states a 3-month warranty. The Happtkey and Starry sets state no warranty term.

Related: the engraving materials hub, best laser engraver for small business, how to choose a laser engraver, best CNC bits for jewelry making and best acrylic earring blanks for laser engraving.

More buying guides

Engraving Materials ·

Best Ring Blanks for Engraving (2026)

Stainless bands, grooved inlay cores and soft aluminum stamping strips: 5 ring blanks for engraving compared by material, size range, surface and pack count.