Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Porter Cable 690 vs Bosch Colt: Which One Should You Buy?

Two 690-series parts against 2 complete Bosch Colt routers, compared on what each listing actually states about fit, power, speed, depth and warranty.

Porter Cable 690 vs Bosch Colt: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bosch GKF18V-25PL14 18V Brushless Colt™ PalmBosch GKF18V-25PL14 18V Brushless Colt™ Palm9.7/10View on Amazon
  2. 2Bosch PR20EVSK-RT Colt Palm Grip 5.7 AmpBosch PR20EVSK-RT Colt Palm Grip 5.7 Amp9.6/10View on Amazon
  3. 3POWERTEC Router Base Plate 2-1/2" Clear AcrylicPOWERTEC Router Base Plate 2-1/2" Clear Acrylic9.4/10View on Amazon
  4. 4Laofudech 42999 1/4 Inch Router Collet ReplacementLaofudech 42999 1/4 Inch Router Collet Replacement9.4/10View on Amazon

A router earns its place on small parts and signs when the bit follows the line you planned, whether that line is a dado, an inlay or a clean edge. The porter cable 690 vs bosch colt choice looks simple until the listings show what each side actually offers: parts that fit one family of routers against complete palm routers on the other.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: Pick the Bosch Colt side if you are buying a complete router: the corded Colt is a full kit with an edge guide, and the cordless Colt adds a battery and a plunge base. Pick the Porter Cable 690 side if you already own a 690-series router and need parts: the base plate and the collets fit that family, but neither is a router on its own.

Machines on the list

Bosch GKF18V-25PL14 18V Brushless Colt™ Palm

Bosch GKF18V-25PL14 18V Brushless Colt™ Palm

Bosch9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18V brushless palm router kit with a CORE18V 4 Ah battery and a plunge base.

Pros

  • 18V brushless motor with 1.39 peak horsepower
  • 10,000 to 30,000 rpm with constant response circuitry
  • CORE18V 4 Ah battery and plunge base included
  • Drop detection, soft-start circuitry and restart protection

Cons

  • No warranty term stated
  • Maximum depth cut of 1-11/32 inches
  • No edge guide stated
  • Size field states only 4 inches, unexplained
Bosch PR20EVSK-RT Colt Palm Grip 5.7 Amp

Bosch PR20EVSK-RT Colt Palm Grip 5.7 Amp

Bosch9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A renewed variable-speed palm-grip router kit with a 5.7 amp motor, an edge guide and a case.

Pros

  • 5.7 amp motor with 15,000 to 35,000 rpm variable speed
  • Soft-start and quick-lock systems
  • Edge guide, wrench, collet, fixed base and case included
  • Aluminum construction and soft grip

Cons

  • Renewed, not new
  • Fixed base only, no plunge base stated
  • Depth adjustment range not stated
POWERTEC Router Base Plate 2-1/2" Clear Acrylic

POWERTEC Router Base Plate 2-1/2" Clear Acrylic

POWERTEC9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A clear acrylic sub-base plate with a 2-1/2 inch center hole that fits Porter-Cable 690, 890 and 100 series routers for dadoes, inlays and edges.

Pros

  • Clear acrylic for workspace visibility
  • 2-1/2 inch center hole for larger diameter bits
  • Fits 690, 890 and 100 series routers
  • Installation hardware included

Cons

  • A base plate only, not a router
  • No warranty term stated
  • No safety certification stated
  • Acrylic plate rather than a metal base
Laofudech 42999 1/4 Inch Router Collet Replacement

Laofudech 42999 1/4 Inch Router Collet Replacement

Laofudech9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 1/4 inch router collets that fit Porter-Cable 690 and 890 series routers.

Pros

  • 2-pack of 1/4 inch collets
  • Fits 690 and 890 series routers
  • Self-releasing collet design
  • Listing states it helps decrease lost bits

Cons

  • Collets only, not a router
  • No warranty term stated
  • No safety certification stated
  • No overall product dimensions stated

Other machines to compare

Side by side

Spec Bosch Colt Corded Bosch Colt Cordless POWERTEC Base Plate Laofudech Collet
HQ Score 67 72 57 56
Type Palm router kit, renewed Palm router kit, cordless Router base plate Router collet, 2-pack
Motor 5.7 amp, 1 horsepower 18V brushless, 1.39 peak horsepower Not stated Not stated
Speed 15,000 to 35,000 rpm 10,000 to 30,000 rpm Not stated Not stated
Depth Not stated 1-11/32 in maximum, 1/64 in increments Not stated Not stated
Weight 0.000625 pounds (implausible) 6.614 pounds 0.3 pounds 1.01 pounds
Warranty One-year, reconditioned Not stated Not stated Not stated
Included Palm router, wrench, collet, fixed base, straight-edge guide, case Router, CORE18V 4 Ah battery, plunge base Base plate and screws 2 collets

Specs are what each manufacturer publishes as its rating on the listing, collected 4 November 2026.

Porter cable 690 vs bosch colt: what each side actually is

The 690 side of this comparison holds no router at all. Its 2 listings are parts: a sub-base plate that fits Porter-Cable 690, 890 and 100 series routers, and a 2-pack of 1/4 inch collets that fits 690 and 890 series routers. The Colt side holds 2 complete palm routers: a corded variable-speed kit and an 18V brushless cordless kit. A base plate and a collet cannot be scored against a motor the way 2 routers can.

Power and speed

Only the Colt side states motor figures. The corded Colt lists a 5.7 amp motor with 1 horsepower and a speed range of 15,000 to 35,000 rpm, with soft-start and quick-lock systems. The cordless Colt lists an 18V brushless motor producing 1.39 peak horsepower and a speed range of 10,000 to 30,000 rpm, with constant response circuitry. The 690 side states no motor figures, since parts have no motor.

Size, weight and fit

The base plate measures 7.0 x 6.0 x 0.2 inches and weighs 0.3 pounds, with a 2-1/2 inch center hole and an outer diameter of 5-11/16 inches for larger diameter bits. The collet listing states a 1/4 inch diameter and a 1/4 inch collet nut size, with no overall product dimensions stated and a spec table weight of 1.01 pounds that reads as listing noise. The corded Colt spec table gives dimensions of 9.1 x 9.1 x 9.1 inches and a weight of 0.000625 pounds, both of which look like placeholder figures, since the bullets state neither.

The cordless Colt is the only complete router here with plausible full dimensions: 3.7 x 3.7 x 6.6 inches at 6.614 pounds. Its depth system is also the most specific, with rough and fine adjustment in 1/64 inch increments and a maximum depth cut of 1-11/32 inches. The corded Colt states a depth adjustment system with no range, and the 690 side states no depth figures.

Choose the Porter Cable 690 side if

  • You already own a 690, 890 or 100 series router and need a clear base plate for dadoes, inlays and edges.
  • You need 1/4 inch replacement collets for a 690 or 890 series router.
  • You want parts with installation hardware included, rather than a new router.

Choose the Bosch Colt side if

  • You are buying a complete palm router, not parts for one you own.
  • You want a corded kit with an edge guide, a fixed base and a case.
  • You want cordless work with a battery and a plunge base included.

For more router options, see CNC routers.

Safety

The 2 Colt routers state soft-start systems, and the cordless Colt adds drop detection and restart protection. The 690-side parts state no safety features.

Project Match

  • Dadoes, inlays and routing edges on a 690-series router: the POWERTEC base plate, with its 2-1/2 inch center hole for larger diameter bits.
  • Replacing a worn 1/4 inch collet on a 690 or 890 series router: the Laofudech 2-pack.
  • Edge-guided palm routing with a corded kit: the corded Colt, which includes a straight-edge guide.
  • Cordless palm routing with plunge cuts: the cordless Colt, which includes a plunge base and a CORE18V 4 Ah battery.
  • Work area: not stated for any of these listings.

FAQ: lasers and CNC

Is the Porter Cable 690 side a router?

No. The featured 690-side listings are a base plate and a collet set that fit 690-series routers, not routers themselves. If you need a complete router, the Colt side is the only side here that offers one.

Can the Bosch Colt routers use Porter Cable 690 parts?

No listing here states that. The cordless Colt listing states backwards compatibility with all PR20 accessories, which are Bosch parts, and the 690-side listings state fit for Porter-Cable 690, 890 and 100 series routers only.

Which Colt is cordless?

The GKF18V-25PL14 Colt is the 18V brushless cordless kit, and it includes a CORE18V 4 Ah battery and a plunge base. The PR20EVSK-RT Colt is the corded variable-speed kit with a fixed base.

Does the corded Colt include an edge guide?

Yes. The corded Colt listing includes a straight-edge guide, along with a drop-forged wrench, a collet, a fixed base and a case. The cordless Colt listing states no edge guide.

What warranty does the renewed Colt have?

The renewed Colt listing states a one-year warranty through the Bosch factory or an authorized service center. The other 3 listings state no warranty term.

Related: see our best 1/4 dado router bit pick.

More buying guides

CNC Routers ·

CNC Milling Machine Setup for Beginners

A beginner guide to CNC milling machine setup: square the vise, indicate the fixed jaw, set the work stop, clamp the part and check…