Overture High Speed Petg vs Sunlu High Speed Petg: Which One Should You Buy?
3 high speed PETG listings compared: an Overture 4-pack and two Sunlu listings, rated on speed, temperature guidance, tolerance and pack size.
On this page
A maker with a functional part to print wants filament that keeps up with a fast printer without jamming or splitting layers, and overture high speed petg vs sunlu high speed petg is the comparison that decides which spool earns the next job. This head-to-head looks at an Overture bundle and Sunlu spools, using only what each listing states about speed, temperature, tolerance and pack size.
As an Amazon Associate I earn from qualifying purchases. LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: Pick the Overture bundle for a multi-spool stock of high speed PETG at up to 300mm/s with a stated tolerance of +/- 0.02mm. Pick Sunlu High Speed PETG for the highest stated top speed, up to 600mm/s, in a 1kg spool with a matte finish. Pick Sunlu PETG 2.0 for a 4-pack aimed at functional everyday parts at 100-200mm/s.
Machines on the list
OVERTURE 4KG Bundle High Speed PETG Filament
A 4-pack of high speed PETG spools rated up to 300mm/s, with neat winding for multi-material systems.
Pros
- Top speed rated up to 300mm/s for fast printers
- Stated tolerance of +/- 0.02mm for parts that must fit together
- Neat winding aimed at tangle-free feeding in multi-material systems
- Vacuum-sealed, pre-dried spools for low-stringing results
Cons
- Spec table lists NumberOfItems as 6 against a 4-pack title and bullets
- Top speed of up to 300mm/s sits below the Sunlu High Speed PETG listing at up to 600mm/s
- Bundle format suits stocking up, not a maker who wants one spool
- No matte or other finish is stated for the printed surface
SUNLU High Speed PETG 3D Printer Filament 1.75mm
A 1kg spool of high speed PETG rated up to 600mm/s, with a matte finish and speed-tiered temperature guidance.
Pros
- Top speed rated up to 600mm/s, the highest stated top speed here
- Speed-tiered nozzle temperatures give a starting point at each speed band
- Matte finish for a soft, even surface on finished prints
- Combines PLA-like ease of use with ABS-like durable strength, per the listing
Cons
- No tolerance is stated, so fit-critical parts lack a stated figure
- 1kg spool format suits trying the filament, not stocking up
- Temperature guidance changes with speed, so settings need care at the top band
- No spool dimensions are stated for this listing
SUNLU PETG2.0 3D Printer Filament, Black
A 4-pack of upgraded PETG spools rated at 100-200mm/s, aimed at functional everyday parts.
Pros
- Impact strength claim of up to 5.196 kJ/m² for tougher functional parts
- Stated tolerance of +/- 0.02mm with neat winding
- 4-pack format for makers stocking up on functional filament
- Reusable spool and vacuum packaging for moisture-free storage
Cons
- No warranty term is stated
- Speed window of 100-200mm/s sits below the other listings on stated top speed
- No matte or other finish is stated for the printed surface
- Toughness claim rests on a comparison to standard PETG with no named baseline
Overture High Speed Petg vs Sunlu High Speed Petg Side by Side
| Spec | Overture HS PETG 4KG | Sunlu High Speed PETG | Sunlu PETG 2.0 4KG |
|---|---|---|---|
| HQ Score | 69 | 66 | 56 |
| Pack | 4-pack, 4kg | 1kg spool | 4-pack, 4kg |
| Filament diameter | 1.75mm | 1.75mm | 1.75mm |
| Top rated speed | Up to 300mm/s | Up to 600mm/s | 100-200mm/s |
| Nozzle temperature | 230-260°C | 230-240, 240-255, 255-270°C | 240-270°C |
| Bed temperature | 65-70°C | 70-80°C | 70-80°C |
| Tolerance | +/- 0.02mm | Not stated | +/- 0.02mm |
| Finish | Not stated | Matte | Not stated |
| Warranty | 1-year Warranty | 1 year manufacturer | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 3 November 2026.
Print speed and settings
Overture rates its bundle up to 300mm/s, with a recommended nozzle range of 230-260°C, a bed range of 65-70°C and a speed range of 30-300mm/s. Sunlu High Speed PETG lists a wider span, 30mm/s to 600mm/s, and ties nozzle temperature to speed in bands: 230-240°C at 50-100mm/s, 240-255°C at 100-300mm/s and 255-270°C at 300-600mm/s, with a bed range of 70-80°C. Sunlu PETG 2.0 lists a narrower window, 100-200mm/s, with a nozzle range of 240-270°C and a bed range of 70-80°C. On stated top speed alone, the Sunlu High Speed PETG listing goes further than the Overture listing. Both sides state their speeds clearly.
Accuracy, winding and finish
Overture states a dimensional accuracy of +/- 0.02mm, neat winding for tangle-free feeding, and spools that arrive vacuum-sealed and pre-dried. Sunlu PETG 2.0 also states +/- 0.02mm accuracy with neat winding and vacuum packaging, plus a reusable spool. Sunlu High Speed PETG does not state a tolerance, so a maker who needs a stated tolerance should note the gap. For finish, Sunlu High Speed PETG is the only listing here that names a matte finish.
Pack sizes and value
Overture sells a 4-pack totaling 4kg, with each spool listed at 1kg (2.2lbs). Sunlu PETG 2.0 also sells a 4-pack totaling 4kg. Sunlu High Speed PETG sells a 1kg spool. Either 4-pack suits a maker stocking up for batch work, while the 1kg Sunlu spool suits a maker trying high speed PETG before committing to a bundle.
Support and warranty
Overture states a 1-year Warranty and offers technical support, and the listing also gives a 1-year shelf life for unopened spools. Sunlu High Speed PETG states a 1 year manufacturer warranty. Sunlu PETG 2.0 states no warranty term, so it earns no warranty points. Keep warranty terms apart from shelf life when comparing.
Choose the Overture bundle if
- You want a 4-pack of high speed PETG for batch work.
- You want a stated tolerance of +/- 0.02mm and neat winding for multi-material systems.
- You want a stated 1-year Warranty with technical support.
Choose Sunlu High Speed PETG if
- You want the highest stated top speed, up to 600mm/s.
- You want a matte finish on finished prints.
- You want speed-tiered temperature guidance from the listing.
Choose Sunlu PETG 2.0 if
- You want a 4-pack aimed at functional everyday parts.
- You want a stated tolerance of +/- 0.02mm with a reusable spool.
- You want the impact strength claim of up to 5.196 kJ/m² for tougher parts.
Print in a ventilated space and follow your printer maker’s guidance on temperature and enclosure. Keep filament dry and away from heat sources, and check your printer maker’s guidance before printing a new material.
Project Match
- Functional prototypes: the Overture bundle, with a stated tolerance of +/- 0.02mm and a stated bed adhesion claim.
- Fast jobs with a matte look: Sunlu High Speed PETG, rated up to 600mm/s with a matte finish.
- Everyday functional parts such as storage racks, hooks, brackets and connectors: Sunlu PETG 2.0, which names those uses in its listing.
- Batch production and print farms: either 4-pack, Overture or Sunlu PETG 2.0.
- Multi-material printing: the Overture bundle, described as AMS friendly.
FAQ: lasers and CNC
Which prints with a higher stated top speed, Overture or Sunlu high speed PETG?
Sunlu High Speed PETG lists up to 600mm/s, while the Overture bundle lists up to 300mm/s. Sunlu PETG 2.0 lists 100-200mm/s.
What temperatures does each listing recommend?
Overture recommends a nozzle range of 230-260°C and a bed range of 65-70°C. Sunlu High Speed PETG ties nozzle temperature to speed, from 230-240°C up to 255-270°C, with a bed range of 70-80°C. Sunlu PETG 2.0 recommends 240-270°C at the nozzle and 70-80°C at the bed.
Is the Overture bundle really a 4-pack?
The title and bullets describe a 4-pack of 1kg spools, but the spec table lists NumberOfItems as 6. Trust the title and bullets over the spec table, and check the listing before ordering.
Which Sunlu filament suits functional everyday parts?
Sunlu PETG 2.0, which names storage racks, tablet stands, hooks, brackets and connectors, and claims an impact strength of up to 5.196 kJ/m².
Does Sunlu High Speed PETG state a tolerance?
No. The listing does not state a tolerance, while the Overture and Sunlu PETG 2.0 listings both state +/- 0.02mm.
Related: PLA vs PETG filament, PETG vs ABS filament, filament dryer for PETG and FDM vs resin 3D printer.
