Jewelry Repair Kit: Tools to Fix Jewelry at Home
A jewelry repair kit with pliers, jump rings and clasps covers most at-home fixes, from a broken clasp to a loose chain link.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
shynek 1857 Pcs Jewelry Making Supplies Kit9.6/10View on Amazon - 2
PAXCOO Jewelry Making Supplies Kit with Tools9.6/10View on Amazon - 3
HIWRBDTI 1200Pcs Gold Silver Small Open Jump Rings9.6/10View on Amazon - 4
URSKYTOUS 4Pcs Jewelry Pliers Set Jewelry Making9.5/10View on Amazon
A clasp that will not close, a chain link that has opened, a jump ring that slipped off an earring hook: these are the small breaks that send jewelry to a drawer instead of back onto the wrist. A jewelry repair kit gathers the pliers for those fixes, with the fuller sets adding the rings and clasps, so the repair happens at home instead of waiting for a trip to a jeweler. This guide explains what a kit needs, how the common fixes work, and which kit fits which repair.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
This guide compares the kits on what each maker publishes. Match the kit against the repair you plan before ordering.

shynek 1857 Pcs Jewelry Making Supplies Kit
A 1857 piece jewelry making and repair kit with 3 pliers, copper wire, necklace chain, helping hands and 1830 findings.
Pros
- 1857 pieces with 1830 findings
- 3 pliers with double leaf spring and non-slip handles
- 2 rolls of copper wire and 2 rolls of necklace chain
- Adjustable helping hands included
Cons
- Jump rings only in 4, 5, 6 and 8 mm sizes
- No warranty term stated
- 1830 findings take time to sort through
- Zip pouch storage rather than a hard case

PAXCOO Jewelry Making Supplies Kit with Tools
A jewelry making and repair kit with 3 pliers, copper wire, beading cord and 845 findings for necklace repair and beading.
Pros
- 845 findings in 12 kinds
- 3 pliers with double leaf spring and non-slip handles
- 2 rolls of copper wire in silver and gold
- Includes caliper, awl, jump ring opener and tape measure
Cons
- Jump rings only in 4, 5, 6 and 8 mm sizes
- No warranty term stated
- Oil coating needs wiping before first use
- Findings box holds 12 kinds to sort

HIWRBDTI 1200Pcs Gold Silver Small Open Jump Rings
A 1200 piece jump ring kit with gold and silver rings, lobster clasps, bent nose pliers, tweezers and a jump ring opener in a plastic case.
Pros
- 1200 jump rings in 4, 5, 6, 8 and 10 mm
- Rings in gold and silver
- Bent nose pliers, tweezers and jump ring opener included
- Multi-compartment plastic case keeps pieces separated
Cons
- Focused on jump rings, no wire or chain
- Bent nose pliers only
- No needles, threaders or measuring tools
- Rings come in gold and silver only

URSKYTOUS 4Pcs Jewelry Pliers Set Jewelry Making
A 4 piece steel pliers set with needle nose, round nose, bent nose and wire cutter pliers for jewelry making and repair.
Pros
- 4 pliers cover gripping, looping, bending and cutting
- Steel pliers for long time use
- Chain nose tips reach into tight places
- Round nose pliers form loops and eye pins
Cons
- No findings, rings or clasps included
- No pouch or case stated
- No wire or cord included
- Pliers only, so repairs need parts from elsewhere
What a jewelry repair kit needs
Most at-home repairs come down to opening and closing a ring, swapping a clasp, or reattaching a hook. Chain nose pliers grip small rings, round nose pliers form loops, a wire cutter cuts wire, and a stock of jump rings and clasps covers the replacement parts. The kits below range from pliers alone to full sets with wire, chain and findings.
Step 1: Open and close a jump ring
Hold the ring with chain nose pliers and twist one end sideways, not apart. Slip the link or clasp onto the open ring, then twist the ends back together until they meet. The chain nose pliers reach into tight places, and the jump ring opener in the PAXCOO, shynek and HIWRBDTI kits holds the ring while you work.
Step 2: Replace a clasp
Open the jump ring that holds the old clasp, slide the clasp off, and close a fresh jump ring through the new clasp and the chain end. Lobster clasps come with the PAXCOO, shynek and HIWRBDTI kits. Check that the new clasp closes and the ring ends meet with no gap.
Step 3: Fix a loose chain or earring hook
A chain that has come apart at a link usually needs only a fresh jump ring at the break: open a ring of matching size, link the chain ends, and close it. For earrings, an earring hook from the kit’s findings replaces a bent hook the same way. The shynek kit (on Amazon) adds necklace chain and an adjustable helping hands stand for holding the work steady.
The gear for jewelry repair
The pliers open and close the rings, the findings supply the replacement parts, and the kits below cover each step above.
These are scored on the HQ Score: performance 30, build 20, value 20, safety 15 and warranty 15. No kit states a safety certification or a warranty term, so all score 0 for safety and warranty.
Common mistakes to avoid
- Buying pliers alone when the repair needs rings and clasps too.
- Opening a jump ring by pulling the ends apart instead of twisting sideways.
- Choosing a kit with no clasp that matches the chain.
FAQ: lasers and CNC
What tools do I need to repair jewelry at home?
Chain nose pliers, round nose pliers and a wire cutter cover most repairs, with jump rings and clasps for the replacement parts. Every kit here has the pliers, and the PAXCOO, shynek and HIWRBDTI kits add the rings and clasps.
What size jump rings do I need?
Match the ring to the link or clasp it joins. The PAXCOO and shynek kits carry open jump rings in 4, 5, 6 and 8 mm, and the HIWRBDTI kit (on Amazon) adds 10 mm rings in gold and silver.
Can I fix a necklace chain with a jewelry repair kit?
Yes, for a broken link. Open a jump ring of matching size, link the chain ends, and close the ring. The shynek kit also includes necklace chain for replacing a longer damaged section.
Do I need to oil the pliers?
The PAXCOO pliers arrive coated with oil to prevent rust, so wipe them clean with a cloth before use and apply oil before storage. The HIWRBDTI pliers have an anti-rust coating to wipe before use.
What is the difference between the PAXCOO and shynek kits?
Both have 3 pliers and similar tools, and both carry jump rings in 4, 5, 6 and 8 mm. The shynek kit has 1830 findings against 845 in the PAXCOO kit (on Amazon), and it adds 2 rolls of necklace chain and an adjustable helping hands stand. The PAXCOO kit’s copper wire comes in silver and gold, and it adds a clear beading string cord.
Related: see the jewelry and lapidary hub, the jewelry repair guide and the best jewelry glue picks. Also see the best ring sizer picks.




