Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use Wood Burning Tool: Beginner Guide

A beginner guide to using a wood burning tool: pick a tip, set the temperature, practice on scrap wood and burn slow, steady lines.

How to Use Wood Burning Tool: Beginner Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1YIHUA 939-II Wood Burning Kit Station PyrographyYIHUA 939-II Wood Burning Kit Station Pyrography9.6/10View on Amazon
  2. 2Wood Burning Kit, 23pcs Wood Burning PenWood Burning Kit, 23pcs Wood Burning Pen9.6/10View on Amazon
  3. 3116pcs Wood Burning Kit, Adjustable Temperature116pcs Wood Burning Kit, Adjustable Temperature9.5/10View on Amazon

Learning how to use wood burning tool starts with a pen or station, a tip, and a piece of scrap wood to practice on. Pick the tip for the line you want, set the temperature for the wood in front of you, and burn slow, steady lines before moving to a finished piece. The steps below walk through setup, temperature, tips and safety, with the gear that handles each part.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

A wood burning tip stays hot after use, so handle hot tips with tweezers or wait until fully cooled, and rest the pen on its stand between lines.

YIHUA 939-II Wood Burning Kit Station Pyrography

YIHUA 939-II Wood Burning Kit Station Pyrography

YIHUA9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pyrography station with a 250 to 750°C range and 20 wire nibs for outlining, shading and calligraphy.

Pros

  • Widest temperature range here, 250 to 750°C
  • 20 wire nibs for outlining, shading and calligraphy
  • Stable pen holder, stencils, scrap wood, tweezers, pliers included
  • 12-month manufacturer technical coverage stated

Cons

  • Stated weight of 3.75 pounds is the heaviest here
  • Station size of 5.67 by 4.92 by 3.54 inches takes desk space
  • Designed for a 110-127V 60Hz US-standard power plug
  • Only 2 stencils and 2 pieces of scrap wood included
Wood Burning Kit, 23pcs Wood Burning Pen

Wood Burning Kit, 23pcs Wood Burning Pen

K KERNOWO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 23-piece pen kit with a 200 to 450°C range and 14 tips for outlining, shading and texture work.

Pros

  • 14 tips for outlining, shading, calligraphy and texture work
  • Adjustable temperature from 200 to 450°C with a control knob
  • Heat shield and soft anti-slip rubber handle stated
  • Stand, tip box, pouch and 4 blank wooden blocks included

Cons

  • No warranty term is stated
  • Lowest top temperature here at 450°C
  • Preheat takes 1 to 3 minutes before use
  • Tips must be tightened before use
116pcs Wood Burning Kit, Adjustable Temperature

116pcs Wood Burning Kit, Adjustable Temperature

IVSUN9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 116-piece kit with a 60W pen, 59 tips and soldering tools for carving, stencils and soldering.

Pros

  • 116 pieces in one box, including 59 tips
  • 60W pen heats up in 30 seconds
  • Adjustable temperature from 220 to 480°C
  • Works as a soldering iron and hot tool, with solder wire and a solder sucker

Cons

  • No warranty term is stated
  • Listing warns not to apply too much pressure when using
  • 116 pieces need sorting before a first project
  • Temperature range tops out at 480°C, below the YIHUA station

How to use wood burning tool step by step

Fit the tip for the line you want and tighten it before use: the KERNOWO kit states to always tighten the pen tips before use. Preheat the pen: the KERNOWO kit states a preheat of 1 to 3 minutes, and the IVSUN pen (on Amazon) heats up in 30 seconds. Practice on scrap wood first: the YIHUA kit recommends trying settings on practice and scrap wood, and the KERNOWO kit includes 4 blank wooden blocks. See our wood burning for beginners guide for setup detail.

Set the temperature for the wood in front of you, then burn slow, steady lines. When the burn looks too light, raise the temperature: the YIHUA kit states to adjust the setting higher when the color of the burn is too light. Let the tip cool fully before changing it.

Pick the temperature for the wood

Different woods need different temperatures: the YIHUA kit states that different types of wood with varying densities require different temperatures. The KERNOWO pen adjusts from 200 to 450°C and the YIHUA station (on Amazon) from 250 to 750°C, both through a control knob, and the IVSUN pen adjusts from 220 to 480°C. Start low on a scrap piece and raise the setting when the burn looks too light.

Choose the tip for the line

Tips decide the line: the KERNOWO kit includes 14 tips for outlining, shading, calligraphy, texture work, carving and stamping, and the YIHUA station includes 20 wire nibs in skew, wire and shader shapes for lines, calligraphy, stippling and crosshatching. The IVSUN kit includes 59 tips, plus 14 stencils with letters, numbers and 12 patterns. Match the tip to the line before heating the pen.

Stay safe while the pen is hot

The pen tip stays hot while you work and after use. The KERNOWO pen has a heat shield, a soft anti-slip rubber handle and an LED power indicator. The YIHUA station has a stable pen holder, and the IVSUN kit includes a soldering iron stand. Handle hot tips with tweezers or wait until fully cooled.

The gear: wood burning kits for beginners

The kits below handle the steps above: temperature control for the wood, tips for each line, and a stand that holds the hot pen between burns.

FAQ: lasers and CNC

What temperature should a wood burning tool use?

The KERNOWO pen adjusts from 200 to 450°C, the IVSUN pen from 220 to 480°C, and the YIHUA station from 250 to 750°C. Try the setting on scrap wood first, and raise it when the burn looks too light.

How long should I preheat a wood burning pen?

The KERNOWO kit states a preheat of 1 to 3 minutes before use, and the IVSUN pen heats up in 30 seconds. Wait until the pen reaches the set temperature before the first line.

Which tip should I use for outlining?

The KERNOWO kit includes 14 tips for outlining, shading, calligraphy and texture work, and the YIHUA station includes 20 wire nibs for outlining, calligraphy and crosshatching.

Can a wood burning tool work on leather and fabric?

Yes. The KERNOWO kit lists wood, leather, fabric, foam and pumpkins, and the IVSUN kit lists wood, leather, cork, foam, card, craft paper and fabric.

Do I need to tighten the tips before use?

The KERNOWO kit states to always tighten the pen tips before use, and to handle hot tips with tweezers or wait until fully cooled.

Related: the craft machines hub, best wood burning kit and wood burning for beginners. Also see best laser engraver for small business.

More buying guides