How to Use Pinking Shears on Fabric Edges
How to use pinking shears on fabric edges, from laying the fabric flat to cutting a smooth zigzag line and storing the shears oiled.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Pinking Shears Serrated,Comfort Grips Handled9.7/10View on Amazon - 2
Pinking Shears for Fabric Cutting9.7/10View on Amazon - 3
Pinking Shears for Fabric Cutting9.5/10View on Amazon
A stack of cut fabric pieces sits on the table, each edge straight and raw, and the next wash could pull those edges apart thread by thread. That is where how to use pinking shears comes in: the shears cut a zigzag edge along the fabric, so the edge frays more slowly through handling and sewing. Hold the shears like normal scissors, keep the fabric flat, and cut along the edge in a smooth line, letting the teeth leave their zigzag pattern as you go.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
| # | Product | HQ Score | Buy |
|---|---|---|---|
| 1 | Pinking Shears Serrated,Comfort Grips Handled | 9.7/10 | Buy on Amazon |
| 2 | Pinking Shears for Fabric Cutting | 9.7/10 | Buy on Amazon |
| 3 | Pinking Shears for Fabric Cutting | 9.5/10 | Buy on Amazon |

Pinking Shears Serrated,Comfort Grips Handled
A 9 inch pair of pinking shears with 5mm teeth, stainless steel blades and rubber-lined comfort grip handles for fabric, denim, leather and paper.
Pros
- 9 inch stainless steel blades with a lasting sharp edge
- Teeth about 5mm apart for a zigzag cut on soft cloth and denim
- Rubber inner ring and ergonomic grip handles for comfortable cutting
- Lifetime warranty stated
Cons
- 9 inch length, shorter than the 9.5 inch Taotree shears
- Teeth spacing is fixed at about 5mm
- Red and black handles only
- Blades cut all the way to the tip, so the tip needs care in storage

Pinking Shears for Fabric Cutting
A 9.5 inch pair of pinking shears with 5mm teeth, soft-grip handles for left- or right-handed use, and a zigzag edge for fabric, leather and paper.
Pros
- 9.5 inch stainless steel blades with 5mm teeth for a zigzag edge
- Soft-grip handles suit left- or right-handed use
- Cuts fabric, leather, paper, denim, fleece, flannel and cotton
- Heavy duty, precision ground blades with a lasting sharp edge
Cons
- No warranty term is stated
- Anti-rust oil on the blades needs wiping before use
- Oil care after use adds a step to storage
- Teeth spacing is fixed at 5mm, so the zigzag size cannot change

Pinking Shears for Fabric Cutting
Pinking shears in 100% stainless steel with 5mm serrated teeth for fabric, leather, plastic and paper, in a purple-pink colour.
Pros
- 100% stainless steel, hardened, with ultra sharp honed edges
- 5mm serrated teeth for a zigzag edge
- Works on fabric, leather, plastic and paper
- Handheld dressmaking shears for sewing fabrics
Cons
- No warranty term is stated
- Teeth spacing is fixed at 5mm
- Purple-pink colour only
- No rubber grip handles, unlike the YAZEMKEL shears
How to use pinking shears
Start with the fabric flat on a table, with the edge you plan to cut clear of folds and pins. Open the shears wide, place the blades at the start of the edge, and close them in a smooth motion, then open and close again along the same line. The teeth cut a zigzag pattern as the blades meet, so each bite leaves a clean, even edge. Keep the lower blade flat against the table so the cut stays straight.
Step 1: Mark the edge and lay the fabric flat
Lay the fabric flat and smooth out wrinkles with your palm before you cut, so the edge does not shift under the blades. Mark the cutting line with chalk if the edge must stay straight. A flat layer cuts cleanly, while a folded layer can leave a stepped edge.
Step 2: Hold the shears and make the cut
Hold the shears with your fingers through the handles and your thumb in the other loop, and keep your wrist straight as you cut. Close the blades fully on each bite so the blades close along the whole edge, and let the shears do the work rather than forcing them through thick layers. The Taotree shears (on Amazon) list soft-grip handles for left- or right-handed use, and the YAZEMKEL shears (on Amazon) list rubber-lined comfort grip handles, so pick the grip that suits your hand.
Step 3: Keep the edge straight as you cut
Move the fabric, not the shears, when the line turns, and keep the blades on the marked line. Cut in a steady rhythm, opening the shears fully between bites, so the zigzag teeth stay even along the whole edge. For more cutting tools, see the best heavy-duty fabric scissors guide.
Step 4: Finish and store the shears
When the cut is done, check the edge from end to end and trim any loose threads. The Taotree shears list anti-rust oil on the blades, so wipe the oil from the blades before using that pair, and that maker recommends storing that pair with a coat of scissors oil after each use. Store the shears closed, with the blades covered, in a dry place away from other tools that could nick the teeth.
The picks: pinking shears for fabric edges
The shears below handle the cutting step in this guide, the smooth zigzag cut along a fabric edge, with different grips and lengths for different hands and fabrics, and 5mm teeth on each pair.
Common mistakes to avoid
- Cutting through folded fabric, which can leave a stepped edge.
- Closing the blades only partway, so the cut does not finish cleanly at the end of each bite.
- Forcing the shears through thick layers instead of cutting in a smooth motion.
- Storing the shears open or loose with other tools, which can nick the teeth.
How to use pinking shears: the short version
- Lay the fabric flat and mark the cutting line.
- Hold the shears flat and cut along the line in a smooth motion.
- Keep the zigzag teeth even by opening the blades fully between bites.
- Trim loose threads, wipe the blades, and store the shears closed.
FAQ: lasers and CNC
What do you use pinking shears for?
Pinking shears cut a zigzag edge on fabric, leather, paper and craft material, for dressmaking, sewing, quilting and scrapbooking.
Can pinking shears cut leather and paper?
The pairs here list leather and paper among their stated uses. The SCAIKTIG shears (on Amazon) list fabric, leather, plastic and paper, the YAZEMKEL shears list soft cloth, thin cloth, denim, paper, leather and craft uses, and the Taotree shears list fabrics, linings, paper, leather, fleece, flannel, denim and cotton.
Can left-handed sewers use pinking shears?
The Taotree shears list soft-grip handles for left- or right-handed use, so a left-handed sewer can use that pair. Check the handles of any other pair before buying, since the other pairs here do not list left-handed use.
How do you keep pinking shears sharp?
The Taotree shears list anti-rust oil on the blades, so wipe the oil from the blades before using that pair, and that maker recommends storing that pair with a coat of scissors oil after each use. The YAZEMKEL shears list precision-ground stainless steel blades with a lasting sharp edge.
What size pinking shears should you buy?
The maker gives two lengths for the YAZEMKEL shears, 9 and 9.5 inches; check before ordering. The Taotree shears are 9.5 inch, and both pairs are listed for dressmaking and craft cutting. Pick the length that suits your hand and the fabric you cut most often, and see the best pinking shears for sewing guide for more pairs.
Related: the best pinking shears for sewing, best all-metal pinking shears and Sewing and Embroidery Machines guides. Also see the how to use sewing pins guide.




